ARDUINO STUDENT KIT
- Comprehensive Components
- Step-by-Step Guidance
- Versatile Applications
- Remote Learning
- Customizable Projects
- Practical Experience
- Enhanced Learning
₹11,999.00 ₹13,999.00
The Arduino Student Kit is a hands-on, step-by-step remote learning tool for ages 11+: get started with the basics of electronics, programming, and coding at home. No prior knowledge or experience is necessary as the kit guides you through step by step. Educators can teach their class remotely using the kits, and parents can use the kit as a homeschool tool for their child to learn at their own pace. Everyone will gain confidence in programming and electronics with guided lessons and open experimentation.
Package Includes:
1 x Arduino Uno
1 x USB cable
1 x Board mounting base
1 x Multimeter
1 x 9V battery snap
1 x 9V battery
20 x LEDs (5 red, 5 green, 5 yellow & 5 blue )
5 x Resistors 560 Ω
5 x Resistors 220 Ω
1 x Breadboard 400 points
1 x Resistor 1kΩ
1 x Resistor 10kΩ
1 x Small Servo motor
2 x Potentiometers 10kΩ
2 x Knob potentiometers
2 x Capacitors 100uF
1 x Solid core jumper wires set
5 x Pushbuttons
1 x Phototransistor
2 x Resistors 4.7kΩ
1 x Jumper wire black
1 x Jumper wire red
1 x Temperature sensor
1 x Piezo
1 x Jumper wire female to male red
1 x Jumper wire female to male black
3 x Nuts and Bolts
Based on 0 reviews
Only logged in customers who have purchased this product may leave a review.
Related products
-
Official Arduino Boards
ATMEGA16U2 Arduino Mega 2560 R3 Improved Version CH340G Board
- Microcontroller CH340
- Operating Voltage 5V
- Input Voltage (recommended) 7-12V
- Input Voltage (limits) 6-20V
- Digital I/O Pins 54 (of which 15 provide PWM output)
- Analog Input Pins 16
- DC Current per I/O Pin 40 mA
- Dimensions : 111 x 54 x 12 (LxWxH) mm.
SKU: n/a -
-
Arduino Boards and Accessories
ESPLORA Joystick Photosensitive Sensor Board, Support LCD Compatible with Arduino
-10%
Arduino Boards and AccessoriesESPLORA Joystick Photosensitive Sensor Board, Support LCD Compatible with Arduino
The design of the Esplora board recalls traditional gamepad design with the analog joystick on the left and four push buttons on the right. The Esplora has the following onboard inputs and outputs :
- Analogue joystick with central push-button two axis (X and Y) and a centre pushbutton.
- 4 push-buttons laid out in a diamond pattern.
- Linear potentiometer slider near the bottom of the board.
- Microphone for getting the loudness (amplitude) of the surrounding environment.
- Light sensor for getting the ambient brightness.
- Temperature sensor reads the ambient temperature (please note that the temperature sensor is not fitted, however we do stock this component).
- Three-axis accelerometer measures the board’s relation to gravity on three axes (X, Y, and Z)
- Buzzer can produce square-waves.
- RGB led bright LED with Red Green and Blue elements for colour mixing.
- 2 TinkerKit Inputs to connect the TinkerKit sensor modules with the 3-pin connectors.
- 2 TinkerKit Outputs to connect the TinkerKit actuator modules with the 3-pin connectors.
- TFT display connector connector for an optional color LCD screen, SD card, or other devices that use the SPI protocol.
- In order to utilise the total number of available sensors, the board uses an analogue multiplexer. This means a single analog input of the microcontroller is shared among all the input channels (except the 3-axis accelerometer). Four additional microcontroller pins choose which channel to read.
SKU: n/a -
Development Boards, Arduino Boards and Accessories
Uno R3 CH340G ATmega328p Development Board Arduino
-40%
Development Boards, Arduino Boards and AccessoriesUno R3 CH340G ATmega328p Development Board Arduino
- Microcontroller ATmega328 (SMD) Arduino compatible– Interface CH340G
- Operating Voltage: 5V
- Input Voltage (recommended): 7-12V
- Input Voltage (limits): 5-20V
- Digital I / O Pins 14 (of which 6 provide PWM output)
- Analog Input Pins: 6
SKU: n/a
There are no reviews yet.