Arduino Boards and Accessories
Showing all 12 results
-
Arduino Boards and Accessories
LilyPad Arduino 328 Main Board ATmega328P ATmega328 16M For Arduino
-15%
Arduino Boards and AccessoriesLilyPad Arduino 328 Main Board ATmega328P ATmega328 16M For Arduino
- Board will run from 2V to 5V.
- The latest version of the LilyPad supports automatic reset for even easier programming.
- The back side of the LilyPad is now completely flat!
- We now use a surface mount programming connector to keep the header from poking through.
- This version of the LilyPad now uses the new ATmega328 at 8MHz.
- Arduino 0016 supports the Pro Mini Arduino 328/8MHz/16MHZ.
- Use this setting when using this new LilyPad 328.
SKU: n/a -
Arduino Boards and Accessories
ESPLORA Joystick Photosensitive Sensor Board, Support LCD Compatible with Arduino
-10%
Arduino Boards and AccessoriesESPLORA Joystick Photosensitive Sensor Board, Support LCD Compatible with Arduino
The design of the Esplora board recalls traditional gamepad design with the analog joystick on the left and four push buttons on the right. The Esplora has the following onboard inputs and outputs :
- Analogue joystick with central push-button two axis (X and Y) and a centre pushbutton.
- 4 push-buttons laid out in a diamond pattern.
- Linear potentiometer slider near the bottom of the board.
- Microphone for getting the loudness (amplitude) of the surrounding environment.
- Light sensor for getting the ambient brightness.
- Temperature sensor reads the ambient temperature (please note that the temperature sensor is not fitted, however we do stock this component).
- Three-axis accelerometer measures the board’s relation to gravity on three axes (X, Y, and Z)
- Buzzer can produce square-waves.
- RGB led bright LED with Red Green and Blue elements for colour mixing.
- 2 TinkerKit Inputs to connect the TinkerKit sensor modules with the 3-pin connectors.
- 2 TinkerKit Outputs to connect the TinkerKit actuator modules with the 3-pin connectors.
- TFT display connector connector for an optional color LCD screen, SD card, or other devices that use the SPI protocol.
- In order to utilise the total number of available sensors, the board uses an analogue multiplexer. This means a single analog input of the microcontroller is shared among all the input channels (except the 3-axis accelerometer). Four additional microcontroller pins choose which channel to read.
SKU: n/a -
Arduino Boards and Accessories, Development Boards
Due AT91SAM3X8E ARM Cortex-M3 Board, 84MHz, 512KB Board compatible with Arduino
-13%
Arduino Boards and Accessories, Development BoardsDue AT91SAM3X8E ARM Cortex-M3 Board, 84MHz, 512KB Board compatible with Arduino
- A 32-bit core, that allows operations on 4 bytes wide data within a single CPU clock.
- CPU clock at 84Mhz
- 96KBytes of SRAM
- 512KBytes of flash memory for code
- A DMA controller, that can relieve the CPU from doing memory intensive tasks.
SKU: n/a -
Arduino Boards and Accessories
Mega2560 Pro ATMEGA2560-16U USB CH340G Development Board
- The board is compatible with Mega 2560.
- Excellent solution for developing projects based on ATmega2560.
- The board can be powered directly through the Micro USB connector
- The maximum output current upon 5V is around 800mA, while on the 3.3V it is about 800mA.
SKU: n/a -
Arduino Boards and Accessories, Development Boards
FT232RL serial port module USB to TTL serial port small board 5V 3.3V 1.8V level Download the burn line
-15%
Arduino Boards and Accessories, Development BoardsFT232RL serial port module USB to TTL serial port small board 5V 3.3V 1.8V level Download the burn line
- Original FT232RL main control chip, fast speed and good stability.
- Support Windows XP/WIN7/WIN8/WIN10 32/64-bit system.
- Stable speed up to 3Mbps (3 times 921600).
SKU: n/a -
Arduino Boards and Accessories, Development Boards
Arduino Nano Board R3 with CH340 chip (Unsoldered)
-44%
Arduino Boards and Accessories, Development BoardsArduino Nano Board R3 with CH340 chip (Unsoldered)
The Arduino Nano Board R3 with CH340 is another popular Arduino development board very much similar to the Arduino UNO They use the same Processor (Atmega328p) and hence they both can share the same program.
SKU: n/a -
Arduino Boards and Accessories, Development Boards
Nano Board R3 CH340 chip With USB Mini Cable compatible with Arduino (soldered)
-17%
Arduino Boards and Accessories, Development BoardsNano Board R3 CH340 chip With USB Mini Cable compatible with Arduino (soldered)
- Microcontroller: Atmega328P
- Operating Voltage: 5V
- Architecture: AVR
- Input Voltage (recommended): 7-12V
- Input Voltage (limits): 6-20V
- Digital I/O Pins 14 (of which 6 provide PWM output)
- Analog Input Pins: 8
- DC Current per I/O Pin 40 mA
- DC Current for 3.3V Pin 50 mA
- Flash Memory: 32 KB of which 2 KB used by the bootloader
- SRAM: 2 KB
- EEPROM: 1 KB
- Clock Speed: 16 MHz
- programmer chip: ch340g
SKU: n/a -
Arduino Boards and Accessories, Development Boards
Nano 328P Expansion Adapter Breakout Board IO Shield
-13%
Arduino Boards and Accessories, Development BoardsNano 328P Expansion Adapter Breakout Board IO Shield
- Compatible with Arduino NANO
- All digital and analog pins breakout
- Compact size;
- External power supply current support
- Leads all pins out, convenient for wiring and doing experiments.
Also known as Arduino Shield, Arduino Nano, Shield, Screw Shield, Expansion Board, Arduino NANO 328P Shield
SKU: n/a -
-
Arduino Boards and Accessories, Development Boards
Arduino Nano Board R3 with CH340 chip (soldered pin)
-22%
Arduino Boards and Accessories, Development BoardsArduino Nano Board R3 with CH340 chip (soldered pin)
- The Arduino Nano Board R3 with CH340 is another popular Arduino development board very much similar to the Arduino UNO They use the same Processor (Atmega328p) and hence they both can share the same program.
SKU: n/a -
Arduino Boards and Accessories, Development Boards
L293D Motor Driver/Servo Shield for Arduino
1. Can drive 4 DC motors or 2 stepper motors or 2 Servos
2. 2 interface for 5V Servo connected to the high-resolution dedicated timer no jitter
2. Up to 4 bi-directional DC motors with individual 8-bit speed selection
4. Up to 2 stepper motors with single coil, double coil or interleaved stepping.
5. 4 H-Bridges: per bridge provides 0.6A (1.2A peak current) with thermal protection, can run motors on 4.5V to 36V DCSKU: n/a -
Arduino Boards and Accessories, Development Boards
Uno R3 CH340G ATmega328p Development Board Arduino
-40%
Arduino Boards and Accessories, Development BoardsUno R3 CH340G ATmega328p Development Board Arduino
- Microcontroller ATmega328 (SMD) Arduino compatible– Interface CH340G
- Operating Voltage: 5V
- Input Voltage (recommended): 7-12V
- Input Voltage (limits): 5-20V
- Digital I / O Pins 14 (of which 6 provide PWM output)
- Analog Input Pins: 6
SKU: n/a
