Raspberry Pi Add On Board - Hats
Showing 49–72 of 110 resultsSorted by popularity
-
-
Raspberry Pi Add On Board - Hats
Waveshare Extended 4-Ch PCIe Gen 2 ×1 Expander Stable Performance Driver-Free
-17%
Raspberry Pi Add On Board - HatsWaveshare Extended 4-Ch PCIe Gen 2 ×1 Expander Stable Performance Driver-Free
- Extending 1-ch PCIe to 4-ch PCIe Gen 2 × 1 sockets, PCIe Gen 1 × 1 compatible
- Flexible power supply options: powered from either PCIe 12V, OR from 12V DC header
- Adopts ASM1184 controller, driver-free, plug and play
SKU: n/a -
Raspberry Pi Add On Board - Hats
Waveshare R800C GSM/GPRS HAT For Raspberry Pi
- Supports SMS, phone call, GPRS, TCP/IP, DTMF, HTTP, FTPl, etc.
- UART interface, for connecting controller boards like Arduino/STM32
- Onboard voltage translator, 3.3V by default, switch to 5V via jumper
- 2x LED indicators, easy to monitor the working status
- SIM card slot, supports 1.8V/3V SIM card
SKU: n/a -
-
Raspberry Pi Add On Board - Hats
Waveshare Isolated RS485 RS232 Expansion HAT for Raspberry Pi, SPI Control
-16%
Raspberry Pi Add On Board - HatsWaveshare Isolated RS485 RS232 Expansion HAT for Raspberry Pi, SPI Control
- Serial port expansion chip: SC16IS752
- OPERATING VOLTAGE: 5V
- RS485 transceiver： SP3485
- Based on Raspberry Pi 40pin GPIO interface, suitable for Raspberry Pi series motherboards
- Using SC16IS752 and SP3485, SP3232 multi-chip combination scheme, can realize SPI to RS485, RS232, the communication rate is up to 921600bps
- RS485 transceiver： SP3485
- RS232 transceiver： SP3232
- Communication Interface： SPI
- DATA RATE: Up to 921600bps
SKU: n/a -
Raspberry Pi Add On Board - Hats, Raspberry Pi Compatible Accessories
Waveshare SIM7600G-H 4G HAT (B) for Raspberry Pi, LTE Cat-4 4G / 3G / 2G Support
-22%
Raspberry Pi Add On Board - Hats, Raspberry Pi Compatible AccessoriesWaveshare SIM7600G-H 4G HAT (B) for Raspberry Pi, LTE Cat-4 4G / 3G / 2G Support
- Model: Waveshare SIM7600G-H 4G HAT
- Supports: Raspberry Pi, LTE Cat-4 4G / 3G / 2G
- Cold starts: 148 dBm
- Power supply: 5V
- Receiver type: 16-channel C/A Code
SKU: n/a -
-
Raspberry Pi Add On Board - Hats
Waveshare Power over Ethernet HAT (E) for Raspberry Pi
- Supports Raspberry Pi 3B+/4B, compatible with the Raspberry Pi official case
- PoE (Power Over Ethernet) capability, IEEE 802.3af-compliant
- Fully isolated switched-mode power supply (SMPS)
- Smaller and more flexible with a more compact component layout
SKU: n/a -
-
-
-
Raspberry Pi Add On Board - Hats
Waveshare L76X Multi-GNSS HAT for Raspberry Pi, GPS, BDS, QZSS
- Power supply voltage: 5V / 3.3V
- Operating current: 13mA
- Protocols: NMEA 0183, PMTK
- GNSS antenna connector
- CAT24C32: EEPROM
- RT9193-33: power manager
- Battery holder: supports ML1220 rechargeable battery, for preserving ephemeris information and hot starts
SKU: n/a -
Raspberry Pi Add On Board - Hats
Stepper Motor HAT V2.0 Shield for Raspberry Pi Zero/3B+/4B
- Wide 5V to 12V Operating Voltage.
- Four Brushed DC Motor Bidirectional Control.
- Two Stepper Motor Control.
- Maximum Peak Current 3A
- PWM frequency up to 32KHz
- Support TTL PWM from the microcontroller
- Thermal Shutdown Protection
SKU: n/a -
Raspberry Pi Add On Board - Hats
Waveshare CM4 To Pi 4B Adapter for Raspberry Pi Alternative Solution for Raspberry Pi 4B, CM4 optional
-17%
Raspberry Pi Add On Board - HatsWaveshare CM4 To Pi 4B Adapter for Raspberry Pi Alternative Solution for Raspberry Pi 4B, CM4 optional
- Onboard 4-ch USB 3.0 ports, compatible with USB 2.0 / 1.1 transmission
- Onboard RJ45 Gigabit Ethernet port, 10 / 100 / 1000 M adaptive
- Onboard PoE header, for connecting PoE HATs
- DSI interface is DSI1
SKU: n/a -
