Drone Transmitter and Receiver
Showing 1–24 of 43 results
-
Drone Parts, Drone Transmitter and Receiver
RTF LC / L-C Power Filter LC-FILTER 2A 2-4S Lipo for FPV works & Immersion RC orange RX
-15%
Drone Parts, Drone Transmitter and ReceiverRTF LC / L-C Power Filter LC-FILTER 2A 2-4S Lipo for FPV works & Immersion RC orange RX
- Maximum Input Voltage: 16V
- Maximum Current: 2A
- L-C Filter circuit reduces DC supply noise
- Built-in Reverse Polarity protection
- Compact design
- The filter is an LC type that uses large value inductor and capacitor components.
- This filter can clean up the dirty power supply.
SKU: n/a -
Drone Parts, Drone Transmitter and Receiver
Mini Radio Receiver 2.4GHz Compatible with Flysky PPM & SBUS Remote Control Transmitter
-16%
Drone Parts, Drone Transmitter and ReceiverMini Radio Receiver 2.4GHz Compatible with Flysky PPM & SBUS Remote Control Transmitter
- Modulation type: GFSK
- DSC port: PPM/I-BUS/S.BUS
- Antenna length: 26mm(not including brass contacts)
- Power input: 4.0-8.4V
- No ground interference( transmitting and receiving 1m from the ground): ＞300m
- Operating current:40mA
- Channel delay: ＜15ms
SKU: n/a -
Drone Parts, Drone Transmitter and Receiver
2.4G 4CH Receiver Compatible with D8 Receiver w/ PWM Output
-8%
Drone Parts, Drone Transmitter and Receiver2.4G 4CH Receiver Compatible with D8 Receiver w/ PWM Output
- Channel: 4CH
- Weight: 2.2g
- Resolution: 1024
- PWM Output: Yes
- Operating Voltage: 3.5-10V
- Current: 50MA
- Antenna Length: 100mm
- Control Range: >500M+
- Compatibility: Compatible with Frsky X9D (D8 Mode), XJT (D8 Mode), DJT, DFT, DHT
SKU: n/a -
Drone Parts, Drone Transmitter and Receiver
Aero Wing Transmitter and Receiver
- Model Type: Quadcopter
- Bandwidth (KHz): 500.
- RF Range (GHz): 2.40 ~ 2.48.
- No. of channels: 10.
- Remote controller weight (gm): 400.
- Power: 6V (1.5V AA*4).
- Transmitting Power: ≤ 20dBm.
- RF Receiver Sensitivity: -105dbm.
SKU: n/a -
Drone Parts, Drone Transmitter and Receiver
FLYSKY Elysium EL18 2.4GHz AFHDS 3 18ch EdgeTX Transmitter 3.5inch Touch Screen CNC Hall Gimbals & Tmr Receiver
-6%
Drone Parts, Drone Transmitter and ReceiverFLYSKY Elysium EL18 2.4GHz AFHDS 3 18ch EdgeTX Transmitter 3.5inch Touch Screen CNC Hall Gimbals & Tmr Receiver
- Model: FLYSKY Elysium EL18 18ch Open Source EdgeTX Transmitter
- FF: 2.4GHz ISM
- 2.4GHz Protocol: AFHDS 3
- Antenna: Twin, one built-in, one external rotatable
- Input Power: 2 x 18650 Li-Ion wired in parallel (not supplied)
- Working Current: 400mA/4.2V
SKU: n/a -
Drone Parts, Drone Transmitter and Receiver
FrSky Tandem X20 ACCESS 900M/2.4GHz Radio Transmitter with TDR6 Receiver
-4%
Drone Parts, Drone Transmitter and ReceiverFrSky Tandem X20 ACCESS 900M/2.4GHz Radio Transmitter with TDR6 Receiver
- Operating Voltage Range: 6.5 ~ 8.4V (2S Li-battery)
- Operating Current: 240mA 7.4V (typ.)
- Built-in 6-axis Gyroscope Sensor
- Default Operating Mode: Mode 2 (Left-Hand Throttle).
- Built-in TD 900M/2.4G Dual-Band Internal RF Module
- Supports Multiple Working Modes
- Supports Recharge System for 2S Li-ion Battery (USB Type-C Interface)
- High-speed PARA Wireless Training System (Compatible with FreeLink App3.0)
- ETHOS: The more powerful, Flexible and Intuitive OS for your radio.
SKU: n/a -
-
Drone Parts, Drone Transmitter and Receiver
Mini Radio Receiver 2.4GHz Compatible with Flysky PPM & SBUS Remote Control Transmitter
-9%
Drone Parts, Drone Transmitter and ReceiverMini Radio Receiver 2.4GHz Compatible with Flysky PPM & SBUS Remote Control Transmitter
- Modulation type: GFSK
- DSC port: PPM/I-BUS/S.BUS
- Antenna length: 26mm(not including brass contacts)
- Power input: 4.0-8.4V
- No ground interference( transmitting and receiving 1m from the ground): ＞300m
- Operating current:40mA
- Channel delay: ＜15ms
SKU: n/a -
Drone Parts, Drone Transmitter and Receiver
HOTRC DS-600 6CH 2.4GHz FHSS Radio System Transmitter Remote Controller GFSK 6CH Receiver PWM
-16%
Drone Parts, Drone Transmitter and ReceiverHOTRC DS-600 6CH 2.4GHz FHSS Radio System Transmitter Remote Controller GFSK 6CH Receiver PWM
- Brand Name: HotRC
- Product Name: DS-600 Transmitter & Receiver
- Number Of Channels: 6
- Spread Specturm Method: FHSS
- Responding Speed: PWM≤20ms
- Frequency Range: 2.4Ghz ISM Wave Band(2.4005-2.4835Ghz)
- Distance: 300-500m On The Water Surface 400-600m On The Ground
SKU: n/a -
Drone Parts, Drone Transmitter and Receiver
Radiolink T8S 2.4GHz 8CH Transmitter + R8EF Receiver with Built-in Rechargeable Battery and Bluetooth for App control
-7%
Drone Parts, Drone Transmitter and ReceiverRadiolink T8S 2.4GHz 8CH Transmitter + R8EF Receiver with Built-in Rechargeable Battery and Bluetooth for App control
- All New ergonomics design with the small size handy to use and travel.
- Three times faster than Open TX
- Built-in IS 900 mAh lithium battery
- Provides excellent anti-interference performance
- Super low battery consumption of 150 mA
- Unlimited models can be stored.
- Bluetooth connectivity for App control and use as a wireless emulator
SKU: n/a -
-
Drone Parts, Drone Transmitter and Receiver
Radiomaster Zorro ELRS Radio Transmitter with RP1 ExpressLRS 2.4ghz Nano Receiver
-8%
Drone Parts, Drone Transmitter and ReceiverRadiomaster Zorro ELRS Radio Transmitter with RP1 ExpressLRS 2.4ghz Nano Receiver
- Charging: Built-in USB-C Charging
- Display: 128*64 Monochrome LCD
- Operational current: 160mA@8.4V
- Operational voltage: 6.6-8.4v DC
- Battery Slot: 2 x 18350 (Not included)
- Supported protocols: ELRS
- Physical dimensions: 170*159*108mm
- Weight: 355gm
SKU: n/a -
Drone Parts, Drone Transmitter and Receiver
Radiolink AT9S Pro 2.4GHz 12CH RC Drone Remote with R9DS Receiver
-65%
Drone Parts, Drone Transmitter and ReceiverRadiolink AT9S Pro 2.4GHz 12CH RC Drone Remote with R9DS Receiver
- Operating Voltage(V): 7.4~18.0V
- Operating Current (A): DSSS & FHSS <90mA at 12V , CRSFdepend on the transmission power selection
- Frequency Band: 2.4GHz ISM band (2400mHz ~ 2483.5MHz)
- Spread Spectrum mode: DSSS & FHSS/CRSF
- Adjacent channel rejections: >38dbm
- Equipped with RC airplane, helicopter, glider, multirotor, car and boat programming and 15-model memory capacity
SKU: n/a -
Drone Parts, Drone Transmitter and Receiver
Radiomaster TX12 MKII ExpressLRS EdgeTX Transmitter with RP1 ExpressLRS 2.4ghz Nano Receiver
-10%
Drone Parts, Drone Transmitter and ReceiverRadiomaster TX12 MKII ExpressLRS EdgeTX Transmitter with RP1 ExpressLRS 2.4ghz Nano Receiver
- Item: TX12 Mark II Radio
- Frequency: 2.400GHZ-2.480GHZ
- RF Chip: ExpressLRS (ELRS) / CC2500
- Working Current: 320mA@8.4V (ELRS) / 180mA@8.4V (CC2500)
- Voltage Range: 6.6-8.4v DC
SKU: n/a -
Drone Parts, Drone Transmitter and Receiver
2.4G 4CH Receiver Compatible with D8 Receiver w/ PWM Output
-3%
Drone Parts, Drone Transmitter and Receiver2.4G 4CH Receiver Compatible with D8 Receiver w/ PWM Output
- Channel: 4CH
- Weight: 2.2g
- Resolution: 1024
- PWM Output: Yes
- Operating Voltage: 3.5-10V
- Current: 50MA
- Antenna Length: 100mm
- Control Range: >500M+
- Compatibility: Compatible with Frsky X9D (D8 Mode), XJT (D8 Mode), DJT, DFT, DHT
SKU: n/a -
Drone Parts, Drone Transmitter and Receiver
Cyclone XF5804 PRO 5.8G 48CH 25/200/600mw Switchable Transmitter
-11%
Drone Parts, Drone Transmitter and ReceiverCyclone XF5804 PRO 5.8G 48CH 25/200/600mw Switchable Transmitter
- Power supply voltage: DC 7-24v
- Video format: automatic NTSC / PAL format
- Number of channels: 40ch
- Channel display: LED combination display
- Parameter setting mode: Press / OSD / betaflight
- Interface: 1.0-6p port
SKU: n/a -
Drone Parts, Drone Transmitter and Receiver
Xf model xf5806 5.8g 40ch 25/100/200/400mw video Switchable FPV VTX transmitter
-9%
Drone Parts, Drone Transmitter and ReceiverXf model xf5806 5.8g 40ch 25/100/200/400mw video Switchable FPV VTX transmitter
- Model: XF5806_V2
- Input voltage: 7-26V
- Onboard BEC output: 5V
- Channels: 40CH
- Transmitting: 25/100/200/400mW Switchable
- Video format: PAL/NTSC
- Control protocol: TBS Smartaudio V2
- Antenna connector: MMCX
- Wiring: pad
- Mounting hole: 20*20mm
SKU: n/a -
Drone Parts, Drone Transmitter and Receiver
Radiolink AT10 2.4GHz 12CH RC Drone Remote with PRM-01 Transmitter and R12DS Receiver
-9%
Drone Parts, Drone Transmitter and ReceiverRadiolink AT10 2.4GHz 12CH RC Drone Remote with PRM-01 Transmitter and R12DS Receiver
- User name and model setup can be saved (up to 15 aircraft)
- RSSI and Telemetry
- Adjustable display brightness and contrast
- Multiple alarms
- Servo reversing and end-point adjustment
- Adjustable servo travel limit (prevents pushrod jamming)
SKU: n/a -
Drone Parts, Drone Transmitter and Receiver
Radiolink T8FB 2.4GHz 8 Channels RC Remote Transmitter with Receiver R8EF Dual Stick Controller
-5%
Drone Parts, Drone Transmitter and ReceiverRadiolink T8FB 2.4GHz 8 Channels RC Remote Transmitter with Receiver R8EF Dual Stick Controller
- Operating voltage: 4.8V~18V
- Operating current: <80(±)mA
- Channels: 8 Channels
- ACPR: >36dBM
- Modulation Mode: GFSK
- Compatible with receivers: R8SM/R8FM/R8EF/R8F/R8FG/R7FG/R6FG/R6F/R4FGM
SKU: n/a -
Drone Parts, Drone Transmitter and Receiver
FlySky FS-T6 6CH Transmitter with FS-R6B Receiver
- No. of Channels:6
- Model type:Glider/Heli/Airlane
- RF range(Hz):2.4000-2.485
- Bandwidth (kHz):500
- Band:160
- RF Power: Less Than 20 dBm
- Sensitivity (dBm):1024
- Battery Slot: 8 x AA battery
- Low Voltage Alarm: Yes (less than 9V)
- DSC port:Yes(PS2; output: PPM)
SKU: n/a -
Drone Parts, Drone Transmitter and Receiver
RTF LC / L-C Power Filter LC-FILTER 2A 2-4S Lipo for FPV works & Immersion RC orange RX
-12%
Drone Parts, Drone Transmitter and ReceiverRTF LC / L-C Power Filter LC-FILTER 2A 2-4S Lipo for FPV works & Immersion RC orange RX
- Maximum Input Voltage: 16V
- Maximum Current: 2A
- L-C Filter circuit reduces DC supply noise
- Built-in Reverse Polarity protection
- Compact design
- The filter is an LC type that uses large value inductor and capacitor components.
- This filter can clean up the dirty power supply.
SKU: n/a -
Drone Parts, Drone Transmitter and Receiver
8CH PWM PPM SBUS Signal Conversion Module
- Operating Voltage: Receiver supply power(3.7~8.4V)
- Working current: <30mA
- Input signal: PPM (CPPM), PWM (general receiver signal) SBUS
- Channels 1-8: Use for PWM signal input or output channel
- Channel 9: Use for PPM, SBUS input, or PPM output
- Channel 10: use for SBUS or PPM output
SKU: n/a
