ESC-Drone Speed Controller
Showing 1–24 of 67 results
-
-
ESC-Drone Speed Controller
DYS XSD20A ESC Solder Version (Original)
- Model: XSD20A Solder version
- Processor: Silabs EFM8BB21
- Battery: 12.6-16.8V (3-4S Lipo)
- Current Rating: 20Amp
- BEC: No (OPTO)
- Signal frequency: 20-500Hz
- Firmware: BLHeli_S (bootloader and firmware)
- Supports: 1-2ms signal, Dshot600/Dshot300
- BLHeli_S does Damped Light only
SKU: n/a -
ESC-Drone Speed Controller
Hobbywing Skywalker- 80A UBEC
1 Output: Continuous 80A, Burst 100A up to 10 seconds.
2 Input Voltage: 3-6S Lipo, 5-18 cells NiMH.
3 BEC: 5A / 5V Switch mode BEC.
4 Refresh rate of the throttle signal: 50Hz to 432Hz.
5 Max Speed: 210000rpm for 2 Poles BLM, 70000rpm for 6 poles BLM, 35000rpm for 12 poles BLM.
(BLM = BrushLess Motor)SKU: n/a -
ESC-Drone Speed Controller
One Shot BLHeli_32 35A 32 bit 2-5S ESC
- Input: 2-5S input Maximum input 6S (close brake)
- 32bit architecture
- Telemetry capability (voltage, current, temperature, speed)
- All inputs and outputs are protected against overvoltage (~30V) and under voltage (~-30V). 3,3 and 5V capable
- Supports all common Dshot commands like Turtle Mode, 3D mode and change of rotation
- Overcurrent protection (measures the current and reduces it to max. 40A)
SKU: n/a -
ESC-Drone Speed Controller
Hobbywing Skywalker-60A- UBEC
1 Output: Continuous 60A, Burst 80A up to 10 seconds.
2 Input Voltage: 3-6S Lipo, 5-18 cells NiMH.
3 BEC: 5A / 5V Switch mode BEC.
4 Refresh rate of the throttle signal: 50Hz to 432Hz.
5 Max Speed: 210000rpm for 2 Poles BLM, 70000rpm for 6 poles BLM, 35000rpm for 12 poles BLM.
(BLM = BrushLess Motor)
6 Size: 77mm*35mm*14mm.
7 Weight: 63gSKU: n/a -
-
-
