Breakout Board
Showing all 21 results
-
Breakout Board
USB Type A Breakout Board – Male
If you want to add a standard type A USB male plug to your project, this breakout board is for you. As simple as it is, this board breaks out all 4 pins of the USB connector into more manageable 2.54mm pitch soldering holes. You can then solder a 4-pin header to plug into a breadboard or solder wires directly to the holes.
SKU: n/a -
Breakout Board
I2C Bi-Directional logic Level Converter- 4 Channel
- Material: ABS + metal
- Dimensions: 16 x13 x 3 (L x W x H) mm
- Weight: 2gm
- Mutual transform between 5V TTL and 3.3V TTL
- Four channels of logic and high voltage low voltage logic can two-way transform
- Portable and lightness, with 2 rows 6 pin contact pins
SKU: n/a -
Breakout Board
DC Power Module DC Power Adapter Plate
- Compatible with connector size: 5.5×2.1 mm.
- Weight: 2 gm
- Power output interface: 2 VCC, 2-way GND
- Reliable and safe connection
- Size: 26×12×13(L×W×H) mm
- Hole Diameter: 6.5mm
- Pin Diameter: 2.1mm
- It has wide use for safe and reliable connection between various Application and power sources
SKU: n/a -
-
-
Breakout Board
Frequency Adjustable Pulse Generator Module NE555
- Input Voltage: 5V-15VDC
- Output amplitude: 4.2V V-PP to 11.4V V-PP.
- Output Current : 15mA for 5V & 35mA for 12V.
- Color: Blue
- Working voltage: 5-12V
- Size: 25x 13 x 12 mm (LxWxH)
- Minimum – 50% duty cycle, 3.7 Hz & Maximum – 98% duty cycle, 1.3KHz
SKU: n/a -
Breakout Board
IRF520 MOSFET Driver Module for Arduino ARM Raspberry pi
- Voltage: 3.3 – 5V.
- Ports: Digital Level.
- Output load voltage: 0-24 V.
- Output load current: <5A (1A above need to add heat sink).
- Platform: Arduino, MCU, ARM, raspberry pi.
- Using original IRF520 Power MOS, you can adjust the output PWM
SKU: n/a -
-
Breakout Board
Serial Port Mini RS232 to TTL Converter Adaptor Module Board MAX3232-2pcs.
- High speed, replaceable MAX232 based. The device fitted supports up to 120kbps
- Works with PCs or Laptops
- Supports microcontroller UARTs – 5V TTL signal levels.
- Single DC supply: wide input range for 4201 or 5V for 4202 and 4203
- Small PCB footprint of 50´40mm
- Low current status LED(s)
- Very low power consumption
SKU: n/a -
-
Breakout Board
ESP-01 Adapter 3.3V 5V Board
- On-board level shift circuit
- Arduino UNO R3 and the compatible board can directly connect to this module;
- Interface logic voltage: 3.3V / 5V compatible(On-board level shift circuit);
- Working voltage: 4.5~5.5V (Onboard 3.3V LDO Regulator);
- Working current: 240mA(MAX).
SKU: n/a -
Breakout Board
MP3-TF-16P MP3 SD Card Module with Serial Port
- Supports sampling rates (KHz): 8 / 11.025 / 12/16 / 22.05 / 24/32 / 44.1 / 48
- 24-bit DAC output, dynamic range support: 90dB, SNR support: 85dB
- Fully supports FAT16, FAT32 file system
- Maximum support 32G TF card
- Support U disk to 32G, 64M bytes of NORFLASH
- A variety of control modes are available. IO control mode, serial mode, AD key control mode
SKU: n/a -
Breakout Board
PAM 8610 Digital Stereo Class-D Amplifier Board 2x15W Output
- Dual-Channel Stereo Output
- Run-on 7V to 15V power Supply
- 32 Steps DC volume control has a +32dB to -75dB range.
- 40 pin QFN 6 x 6 mm package.
- Much higher efficiency in terms of cost and performance than competitors’ ICs
SKU: n/a -
