LORA Module
Showing all 12 results
-
LORA Module
SenseCAP M1 LoRaWAN Indoor Gateway(4G RAM+SX1302) – EU868
- Input Voltage DC 5V – 3A
- Processor Raspberry Pi 4 (Broadcom BCM2711, Quad-core Cortex-A72 (ARM v8) 64-bit SoC @ 1.5GHz)
- RAM: 4GB
- Storage: 64GB MicroSD Card
- Wi-Fi 2.4 GHz and 5.0 GHz IEEE 802.11ac wireless
- Bluetooth 5.0, BLE
- LoRaWAN Supports Class A, C
SKU: n/a -
LORA Module
TTGO T-Beam V1.1 ESP32 LORA 868MHz WiFi Wireless Bluetooth Module with IPEX &18650 Battery Holder-Unsoldered
-16%
LORA ModuleTTGO T-Beam V1.1 ESP32 LORA 868MHz WiFi Wireless Bluetooth Module with IPEX &18650 Battery Holder-Unsoldered
-
Power Supply: Input USB 5V/1A
-
Charging current :500mA
-
Battery Input: 3.7-4.2V
- It also has a digital RSSI function, RF wake-up function,
- 4MB flash memory,
- Low voltage detection, and temperature sensor,
- Fast wake-up and frequency hopping LED signal indicator, and battery with data backup.
SKU: n/a -
-
IoT & Wireless, LORA Module
Ai Thinker LoRa Series Ra-02 Spread Spectrum Wireless Module
- Manufacturer: Ai-Thinker
- LoRa Spread Spectrum modulation technology
- Constant RF power output at + 20dBm-100mW voltage change
- High sensitivity: down to -148dBm
- Half-duplex SPI communication
- Programmable bit rates up to 300kbps
- Supports FSK, GFSK, MSK, GMSK, LoRa and OOK modulation modes
SKU: n/a -
IoT & Wireless, LORA Module
ESP32 LoRa SX1278 0.96 Inch Blue OLED Display BT WiFi Module for Arduino ( Type C- Connector )
-9%
IoT & Wireless, LORA ModuleESP32 LoRa SX1278 0.96 Inch Blue OLED Display BT WiFi Module for Arduino ( Type C- Connector )
- Product: ESP32 LoRa SX1278 0.96 Inch Blue OLED Display BT WiFi Module for Arduino ( Type C- Connector )
- Wi-Fi antenna
- Onboard 32MByte Flash
- 0.96-inch blue OLED display
- lithium battery charging circuit and interface
- CP2102 USB to serial port chip
SKU: n/a -
IoT & Wireless, LORA Module
ESP32 LoRa SX1278 0.96 Inch Blue OLED Display BT WiFi Module for Arduino
-9%
IoT & Wireless, LORA ModuleESP32 LoRa SX1278 0.96 Inch Blue OLED Display BT WiFi Module for Arduino
- Supports Sniffer, Station, softAP and Wi-Fi Direct modes
- Data rate: 150 Mbps @ 11n HT40,72 Mbps @ 11n HT20,54 Mbps @ 11g, 11 Mbps @ 11b
- Transmit power: 19.5 dBm @ 11b, 16.5 dBm @ 11g, 15.5 dBm @ 11n
- Receiver sensitivity up to – 98 dBm
- UDP continues to throughput by 135 Mbps
SKU: n/a -
IoT & Wireless, LORA Module
TTGO T-Beam V1.1 ESP32 LORA 868MHz WiFi Wireless Bluetooth Module with IPEX &18650 Battery Holder-Unsoldered
-10%
IoT & Wireless, LORA ModuleTTGO T-Beam V1.1 ESP32 LORA 868MHz WiFi Wireless Bluetooth Module with IPEX &18650 Battery Holder-Unsoldered
-
Power Supply: Input USB 5V/1A
-
Charging current :500mA
-
Battery Input: 3.7-4.2V
- It also has a digital RSSI function, RF wake-up function,
- 4MB flash memory,
- Low voltage detection, and temperature sensor,
- Fast wake-up and frequency hopping LED signal indicator, and battery with data backup.
SKU: n/a -
