Stepper Motor Drivers
Showing all 10 results
-
Motors, Stepper Motor Drivers
3D Printer Controller Board RAMPS 1.4 Arduino Mega Shield RepRap Prusa Model
-21%
Motors, Stepper Motor Drivers3D Printer Controller Board RAMPS 1.4 Arduino Mega Shield RepRap Prusa Model
- Supply Voltage: 12V
- Standard interfaces (as that of the extruder)
- Reserved GCI like I2C and RS232
- 3 MOSFET’s are applied to the heater/ fan and thermistor circuit.
- Another 5A added to protect the component parts.
- An 11A fuse is added to the hotbed.
- Support 5 stepper drive board
SKU: n/a -
Motors, Stepper Motor Drivers
MACH3 Interface Board CNC 5 Axis with Optocoupler for Stepper Motor Driver and USB cable
-18%
Motors, Stepper Motor DriversMACH3 Interface Board CNC 5 Axis with Optocoupler for Stepper Motor Driver and USB cable
- Compatible with MACH3, Linux CNC (EMC2) etc. parallel-control CNC software.
- USB power supply and peripherals power phase are separate to protect computer security.
- All the signals are to-isolate which can protect your computer security.
- 5-input interface to define the Limit, Emergence-Stop, Cutter alignment, etc.
- Wide input voltage range: 12-24V, and with anti-reverse function.
- One relay output control interface, accessed by the spindle motor or the air pump, water pump, etc.
SKU: n/a -
-
Motors, Stepper Motor Drivers
TB6600 Stepper Motor Driver Controller 4A 9~42V TTL 16 Micro-Step CNC 1 Axis
-15%
Motors, Stepper Motor DriversTB6600 Stepper Motor Driver Controller 4A 9~42V TTL 16 Micro-Step CNC 1 Axis
- Input Current: 0~5A
- Output Current: 0.5~4.0A
- Control Signal: 3.3~24V
- Power (MAX): 160W
- Micro Step: 1, 2/A, 2/B, 4, 8, 16, 32
- Temperature: -10～45℃
- H bridge bipolar constant current drive.
SKU: n/a -
Motors, Stepper Motor Drivers
TB6560 Driver Board 3A CNC Router Single 1 Axis Controller Stepper Motor
-14%
Motors, Stepper Motor DriversTB6560 Driver Board 3A CNC Router Single 1 Axis Controller Stepper Motor
- Driver Chip: TB6560AHQ
- Operating Voltage: 10-35V
- Nominal Voltage: 24V
- With the large heat sink to ensure good heat dissipation
- 6N137 high-speed OptoCoupler, to ensure a high speed without step out.
SKU: n/a -
Motors, Stepper Motor Drivers
TB6600 Stepper Motor Driver Controller 8~50V 4.5A
- Supply Voltage: 8V – 50V DC (36V recommended).
- Output current: 0.3A – 4.5A (peak value of 5A).
- Micro Step: 1, 2, 8, 16.
- Maximum PWM frequency: 200kHz.
- Adjustments for the maximum current of the LED: 1A, 2.2A, 3.3A, 4.5A.
- Operating temperature: -10 to + 45 ° С.
SKU: n/a -
Motors, Stepper Motor Drivers
Cytron 3Amp 4V-16V Dual Channel DC Motor Driver MDD3A
- Bidirectional control for two brushed DC motor.
- Control one unipolar/bipolar stepper motor.
- Operating Voltage: DC 4V to 16V
- Maximum Motor Current: 3A continuous, 5A peak
- Buck-boost regulator to produce 5V output (200mA max).
- Buttons for quick testing.
SKU: n/a -
Motors, Stepper Motor Drivers
Cytron 20Amp 6V-30V DC Motor Driver MD20A
- Bidirectional control for one brushed DC motor.
- Operating Voltage: DC 6V to 30V
- Maximum Motor Current: 20A continuous, 60A peak
- Buttons for quick testing.
- LEDs for motor output state.
- Overcurrent protection with active current limiting.
- Temperature protection.
- Undervoltage shutdown.
SKU: n/a -
Motors, Stepper Motor Drivers
Leadshine DM542 Digital Stepper Motor Driver
- Good high-speed performance
- Supply voltage up to +50VDC
- Output current up to 4.2A
- Pulse frequency up to 300 KHz
- Automatic idle-current reduction
- 3-state current control technology
- Self-adjustment technology
- Pure-sinusoidal current control technology
SKU: n/a
