3D Printer
Showing 25–48 of 50 results
-
3D Printer, 3D Printer Extruder Parts and Fans
Small 5V 140mA Turbo Air Intake Fan (Size: 40x40x20mm)
-14%3D Printer, 3D Printer Extruder Parts and FansSmall 5V 140mA Turbo Air Intake Fan (Size: 40x40x20mm)
- Operating Voltage: 5V DC
- Operating Current: 140mA
- Normal Operating Temperature: 25°C-45°C.
- Weight: 26 gm.
- Life Expectancy: Dual Ball Bearing: 50000 hours.
- Sleeve Bearing: 20000-25000 hours.
- Reliable quality as well as Competitive price.
- Large volume flow and long life expectancy.
- High speed and large airflow.
- Low noise and high efficiency.
SKU: n/a -
3D Printer, 3D Printer Heatbed and Accessories
Sharp Edge Scraper 2 Inches for 3D Printers
- Stainless steel blade is rustproof and strong.
- The rubber handle is comfortable and will offer a non-slip grip.
- The non-slip handle also features a ribbed thumb rest for ease of use during scraping.
- The rubber handle offers both comfort and a non-slip grip.
SKU: n/a -
Development Boards, Shield for Arduino
CNC shield V3 for Engraving Machine 3D Printer A4988 DRV8825 driver expansion board
-14%Development Boards, Shield for ArduinoCNC shield V3 for Engraving Machine 3D Printer A4988 DRV8825 driver expansion board
- Latest Arduino CNC Shield Version 3.10
- GRBL 0.9 compatible. (Open-source firmware that runs on an Arduino UNO that turns G-code commands into stepper signals)
- Coolant enable.
- Jumpers to set the Micro-Stepping for the stepper drivers. (Some drivers like the DRV8825 can do up to 1/32 micro-stepping )
- Compact design.
- 4-Axis support (X, Y, Z, A-Can duplicate X, Y, Z or do a full 4th axis with custom firmware using pins D12 and D13)
- 2 x End stops for each axis (6 in total)
SKU: n/a -
-
Motors, Stepper Motor Drivers
3D Printer Controller Board RAMPS 1.4 Arduino Mega Shield RepRap Prusa Model
-21%Motors, Stepper Motor Drivers3D Printer Controller Board RAMPS 1.4 Arduino Mega Shield RepRap Prusa Model
- Supply Voltage: 12V
- Standard interfaces (as that of the extruder)
- Reserved GCI like I2C and RS232
- 3 MOSFET’s are applied to the heater/ fan and thermistor circuit.
- Another 5A added to protect the component parts.
- An 11A fuse is added to the hotbed.
- Support 5 stepper drive board
SKU: n/a -
Motors, Stepper Motor Drivers
MACH3 Interface Board CNC 5 Axis with Optocoupler for Stepper Motor Driver and USB cable
-18%Motors, Stepper Motor DriversMACH3 Interface Board CNC 5 Axis with Optocoupler for Stepper Motor Driver and USB cable
- Compatible with MACH3, Linux CNC (EMC2) etc. parallel-control CNC software.
- USB power supply and peripherals power phase are separate to protect computer security.
- All the signals are to-isolate which can protect your computer security.
- 5-input interface to define the Limit, Emergence-Stop, Cutter alignment, etc.
- Wide input voltage range: 12-24V, and with anti-reverse function.
- One relay output control interface, accessed by the spindle motor or the air pump, water pump, etc.
SKU: n/a -
-
-
3D Printer, 3D Printer Filaments
eSun PLA+ 1.75mm 3D Printing Filament 1kg-Black
- Consistently High Quality
- Made from great, high-performance materials
- Ready to print on any open source desktop or industrial printer
- Deliver exceptional performance
- 100% bio-degradable and FDA food safety approved
- 10 times stronger than regular PLA on the market
SKU: n/a -
3D Printer, 3D Printer Filaments
eSun PLA+ 1.75mm 3D Printing Filament 1kg-White
- Consistently High Quality
- Made from great, high-performance materials
- Ready to print on any open source desktop or industrial printer
- Deliver exceptional performance
- 100% bio-degradable and FDA food safety approved
- 10 times stronger than regular PLA on the market
SKU: n/a -
3D Printer, Stepper Motor
BIGTREETECH BTT TMC2225 V1.0 Stepper Motor Driver for 3D Printer
- 2-phase stepper motors up to 2A coil current (peak)
- STEP/DIR Interface with 4, 8, 16 or 32 microstep pin setting
- Smooth Running 256 microsteps by MicroPlyer interpolation
- StealthChop2 silent motor operation
- SpreadCycle highly dynamic motor control chopper
- Passive Braking and Freewheeling
- Single Wire UART & OTP for advanced configuration options
- Integrated Pulse Generator for standalone motion
SKU: n/a -
3D Printer, 3D Printer Extruder Kit
1.75mm Direct Extruder Full Kit
- Nozzle diameter: 0.4mm
- Voltage: 12V.
- Power: 40W.
- Operating Temperature: 200ºC to 280ºC
- Compatible for ABS and PTEG material
- Feed diameter : For 1.75mm Filament (Direct)
- Heater size : 6 x 15mm (DxL).
- 1.75mm Direct Extruder Full Kit
SKU: n/a -
3D Printer, 3D Printer Extruder Kit
All complete Bowden V6 with Fan Cable 30cm Length for 1.75 mm filament 0.2 mm Nozzle
-11%3D Printer, 3D Printer Extruder KitAll complete Bowden V6 with Fan Cable 30cm Length for 1.75 mm filament 0.2 mm Nozzle
- The Bowden V6 with a fan cable measuring 30cm in length is a comprehensive assembly designed for compatibility with 1.75mm filament and features a 0.2mm nozzle.
- Renowned for its consistent high-temperature performance suitable for high-temp printing, this assembly also offers enhanced functionality tailored for printing soft and flexible filaments.
- Included in this kit are essential components such as the thermistor, heater block, 0.2mm nozzle, sleeving, and a cooling fan complete with its holder.
SKU: n/a -
3D Printer, 3D Printer Extruder Kit
Complete Kit of MK8 Extruder with 0.4mm Nozzle (Assembled)
- High-Quality Single End Cartridge Heater(Heating Element )
- High-quality stepper motor with larger torque and less heat buildup
- Uniform heating aluminium heater block
- Direct transmission, without the heavy gears, compact size and weight
- The lever mechanism makes filament insertion and extraction a breeze
- High-Quality Single End Cartridge Heater(Heating Element )
- High-quality stepper motor with larger torque and less heat buildup
- Uniform heating aluminium heater block
- Direct transmission, without the heavy gears, compact size and weight
- The lever mechanism makes filament insertion and extraction a breeze
SKU: n/a -
3D Printer, 3D Printer Display and Controller
2004 LCD Display RepRapDiscount Smart Controller with Adapter
-14%3D Printer, 3D Printer Display and Controller2004 LCD Display RepRapDiscount Smart Controller with Adapter
- RAMPS 1.4 2004 LCD Display intelligent controller.
- LED background light control circuit, a small function of the intelligent controller,
- With pin short time to decide on all LED turn or steering 30 seconds
- You can turn on the light time to do the long or short form of the adjustment TRIMM R4100K from 10 seconds to 2 minutes.
- Plug and play on the RAMPS, but need to modify the firmware to support.
- The product comes encoder parameter adjustment can be achieved, and the file selection print.
- With an SD card base on the back, put slicing file into the SD card and select the file on the LCD, then can be printing.
SKU: n/a -
3D Printer, 3D Printer Display and Controller
3D printer 128×64 Smart LCD controller for ramps 1.4
-9%3D Printer, 3D Printer Display and Controller3D printer 128×64 Smart LCD controller for ramps 1.4
- RAMPS 1.4 LCD 12864 intelligent controller.
- With an SD card base on back.
- Large screen display 128×64 LCD (3.2″)
- SD card slot at the back, able to directly select a file and print
- The product comes encoder parameter adjustment can be achieved, and the file selection print
- Plug & play on the RAMPS, but need to modify the firmware to support.
- LCD 12864 Smart Controller fully supported by Marlin Firmware.
SKU: n/a -