Accelerometer
Showing all 7 results
-
IMU
BMP280 Barometric Pressure and Altitude Sensor I2C/SPI Module
- Operating Voltage: 1.71V to 3.6V – would typically be operated from 3.3V.
- Operating Temperature: -40 to +85 deg. Celsius (full accuracy between 0 and +65 deg. C).
- Peak current: 1.12mA.
- Operating Pressure: 300 hPa to 1100 hPa.
- Accuracy between 700 to 900hPa and 25 to 40 deg. C: ±0.12hPa and ±1.0m.
SKU: n/a -
IMU
ADXL345 Tripple Axis Accelerometer Board
- Supply Voltage: 3.3 V/ 5V.
- Interface Type: I²C, SPI.
- Sensing Range: ±2g, ±4g, ±8g, ±16g.
- Sensitivity:
- X: 28.6 LSB/g.
- Y: 31.2 LSB/g.
- Z: 34.5 LSB/g.
- Ultra Low Power: 40µA in measurement mode, 0.1µA in standby@ 2.5V.
- Free-Fall Detection.
- Tap/Double Tap Detection.
SKU: n/a -
IMU
ADXL335 Module 3-axis Analog Output Accelerometer
- Onboard LDO Voltage regulator
- Can be interfaced with 3V3 or 5V Microcontroller.
- Tap/Double Tap Detection
- Free-Fall Detection
- Analog output
- Build in ultra low noise linear LDO voltage regulator
- Built-in onboard filters, which reduce noise from the motor and other high current electronics
- Power LED
SKU: n/a -
-
IMU
SparkFun 9DoF IMU Breakout – ICM-20948
- Integrated ICM-20948 IMU and SAMD21 microprocessor.
- LiPo battery charger.
- µSD card socket.
- Preprogrammed example firmware that streams and/or logs:
- Accelerometer, gyroscope and magnetometer data…
- and/or quaternions, and Euler angles
- Arduino-programmable via USB.
SKU: n/a
