Arduino UNO
Showing all 21 results
-
Boards Compatible with Arduino, Display for Arduino
1602 LCD Board Keypad Shield Blue Backlight
- Provides a user-friendly interface that allows users to go through the menu, make selections etc.
- It consists of a 1602 white character blue backlight LCD.
- The keypad consists of 6 keys select, up, right, down, left and reset.
- To save the digital IO pins, the keypad interface only uses one ADC channel.
- The key value is read out through a 5 stage voltage divider.
SKU: n/a -
Development Boards, Shield for Arduino
Sensor Shield V5 Expansion Board For Arduino
- Retain the merits of the V4.0 version
- Laminated design
- PCB immersion gold processing technology
- IIC interface
- Bluetooth module communication interface
- SD card module communication interface
- APC220 wireless rf modules communication interface
- RB URF v1.1 ultrasonic sensors interface
- 12864 LCD string of line and parallel interface
- 32 servo controller interface
SKU: n/a -
Development Boards, Shield for Arduino
UNO Proto Shield prototype expansion board with SYB-170 mini breadboard
-10%
Development Boards, Shield for ArduinoUNO Proto Shield prototype expansion board with SYB-170 mini breadboard
- It has a nice standard 0.1″x0.1″ prototyping grid with big pads
- Comes with Stacking headers and plain header, choose whichever you want when soldering together
- An IC pattern for adding DIP ICs up to 20 pins
- Power rails down the middle and sides
- A reset button and an extra general use button
- Two 3mm general use LEDs, red and green, as well as 2 matching resistors
SKU: n/a -
Development Boards, Shield for Arduino
L293D Motor Driver/Servo Shield for Arduino
- 2 connections for 5V ‘hobby’ servos connected to the Arduino’s high-resolution dedicated timer
- 4 H-Bridges: L293D chipset provides 0.6A per bridge (1.2A peak) with thermal shutdown protection, internal kickback protection diodes.
- Can run motors on 4.5VDC to 25VDC.
- Up to 4 bi-directional DC motors with individual 8-bit speed selection (so, about 0.5% resolution)
- Up to 2 stepper motors (unipolar or bipolar) with single coil, double coil, or interleaved stepping.
SKU: n/a -
Development Boards, Shield for Arduino
XBee Shield V03 Module Wireless Control
- Stackable design, easy to plug into the ARDUINO development board.
- Coupled with the Arduino Bluetooth Bee Bluetooth module, and other Bluetooth devices can communicate Wirelessly.
- 3.3v and 5v dual power output.
- 3.3v and 5v IO compatible.
- USB2.0 protocol.
SKU: n/a -
-
Development Boards, Shield for Arduino
Proto Screw Shield 1.0 For Arduino Uno
- Arduino terminal to provide the IO, port connection.
- 3.81 posts quality, reliable, convenient, durable.
- Combined with the Proto Shield, the middle can be used as a prototype expansion board.
- Double-sided PCB Prototyping extended area vias connecting the front sides can be welded components.
- The middle section can be placed small bread plate, convenient test extend
SKU: n/a -
Development Boards, Shield for Arduino
ADK USB Host Shield compatible with Arduino
- Works with standard (dual 5/3.3V) and 3.3V-only (for example, Pro Arduino) boards.
- Complies with USB Specification Revision 2.0 (Full-Speed 12Mbps Peripheral, Full-/Low-Speed 12Mbps/1.5Mbps Host)
- Supports HID devices, such as keyboards, mice, joysticks, etc.
- Compatible with Mass storage devices, such as USB sticks, memory card readers, external hard drives (FAT32 Type File System – Mega Arduino only).
SKU: n/a -
Development Boards, Shield for Arduino
SHIELD-EKG-EMG
- Stackable connectors – up to 6 channels can be stacked and wired to A0-A6 analogue inputs.
- Calibration signal generation by D4/D9 digital output
- Precise trimmer potentiometer for calibration (all boards are shipped completely assembled, tested and calibrated so that you don’t have to do this unless you want to see how things works)
- Input connector for standard or active electrodes.
- Works with both 3.3V and 5V Arduino boards
SKU: n/a -
Development Boards, Kits compatible with Arduino
Uno Learning kit for Arduino
- All-in-one kit, a great starter kit for learning coding.
- Microcontroller ATmega328 (SMD) – Interface CH340G
- Operating Voltage: 5V
- Input Voltage (recommended): 7-12V
- Input Voltage (limits): 5-20V
- Digital I / O Pins 14 (of which 6 provide PWM output)
- Analog Input Pins: 6
SKU: n/a -
Development Boards, Kits compatible with Arduino
Arduino Uno R3 Beginners Kit
- Great for Starting with Arduino Programming
- A variety of components are included in this pack to try out different projects.
- All-in-one kit, a great starter kit for learning to code.
- Microcontroller ATmega328 (SMD) – Interface CH340G
SKU: n/a -
Development Boards, Kits compatible with Arduino
Advanced Kit for Arduino
- All-in-one kit, a great starter kit for learning to code.
- Model Type: UNO Rev R3
- Microcontroller Chip: ATmega328
- Input Voltage(Recommended): 7-12V
- Operating Voltage: 5
- Analog I/O Pins: 6
- Digital I/O Pins: 14 (of which 6 provide PWM output)
SKU: n/a -
Boards Compatible with Arduino, Development Boards
UNO R3 CH340G ATMega328P compatible with arduino + Cable + Transparent Acrylic Case For Uno R3
-15%
Boards Compatible with Arduino, Development BoardsUNO R3 CH340G ATMega328P compatible with arduino + Cable + Transparent Acrylic Case For Uno R3
- A basic Arduino Kit including everything to get started.
- It includes a quality proven Arduino Cable.
- It includes a strong and sturdy Transparent Acrylic Case.
- Microcontroller ATmega328 (SMD) – Interface CH340G
- Operating Voltage: 5V
- Input Voltage (recommended): 7-12V
- Digital I / O Pins 14 (of which 6 provide PWM output)
- Analog Input Pins: 6
SKU: n/a -
Boards Compatible with Arduino, Development Boards
Uno R3 compatible with Arduino + Cable + Transparent acrylic case for Uno R3
-13%
Boards Compatible with Arduino, Development BoardsUno R3 compatible with Arduino + Cable + Transparent acrylic case for Uno R3
- A basic Arduino Kit including everything to get started.
- It includes a quality proven Arduino Cable.
- It includes a strong and sturdy Transparent Acrylic Case.
- Micro-controller : ATmega328
- Operating Voltage: 5V
- Input Voltage (recommended) : 7-12V
- Digital I/O Pins: 14 (of which 6 provide PWM output)
- Analog Input Pins: 6
SKU: n/a -
-
Sensor Kits, Sensors
37 in 1 Sensors Kit compatible with Arduino
- For beginners who are interested in Arduino
- A complete set of Arduino’s most common and useful electronic components
- Infrared sensor receiving module
- Laser sensor module
- Temperature and humidity sensor module
- Infrared sensor module
- 5v relay module
- Obstacle avoidance sensor module.
SKU: n/a -
-
Arduino Boards and Accessories, Development Boards
L293D Motor Driver/Servo Shield for Arduino
1. Can drive 4 DC motors or 2 stepper motors or 2 Servos
2. 2 interface for 5V Servo connected to the high-resolution dedicated timer no jitter
2. Up to 4 bi-directional DC motors with individual 8-bit speed selection
4. Up to 2 stepper motors with single coil, double coil or interleaved stepping.
5. 4 H-Bridges: per bridge provides 0.6A (1.2A peak current) with thermal protection, can run motors on 4.5V to 36V DCSKU: n/a -
Arduino Boards and Accessories, Development Boards
Uno R3 CH340G ATmega328p Development Board Arduino
-40%
Arduino Boards and Accessories, Development BoardsUno R3 CH340G ATmega328p Development Board Arduino
- Microcontroller ATmega328 (SMD) Arduino compatible– Interface CH340G
- Operating Voltage: 5V
- Input Voltage (recommended): 7-12V
- Input Voltage (limits): 5-20V
- Digital I / O Pins 14 (of which 6 provide PWM output)
- Analog Input Pins: 6
SKU: n/a
