Arduino UNO
Showing all 19 resultsSorted by popularity
-
Development Boards, Kits compatible with Arduino
Arduino Uno R3 Beginners Kit
- Great for Starting with Arduino Programming
- A variety of components are included in this pack to try out different projects.
- All-in-one kit, a great starter kit for learning to code.
- Microcontroller ATmega328 (SMD) – Interface CH340G
SKU: n/a -
Display for Arduino
1602 LCD Board Keypad Shield Blue Backlight
- Provides a user-friendly interface that allows users to go through the menu, make selections etc.
- It consists of a 1602 white character blue backlight LCD.
- The keypad consists of 6 keys select, up, right, down, left and reset.
- To save the digital IO pins, the keypad interface only uses one ADC channel.
- The key value is read out through a 5 stage voltage divider.
SKU: n/a -
Development Boards, Shield for Arduino
L293D Motor Driver/Servo Shield for Arduino
- 2 connections for 5V ‘hobby’ servos connected to the Arduino’s high-resolution dedicated timer
- 4 H-Bridges: L293D chipset provides 0.6A per bridge (1.2A peak) with thermal shutdown protection, internal kickback protection diodes.
- Can run motors on 4.5VDC to 25VDC.
- Up to 4 bi-directional DC motors with individual 8-bit speed selection (so, about 0.5% resolution)
- Up to 2 stepper motors (unipolar or bipolar) with single coil, double coil, or interleaved stepping.
SKU: n/a -
Development Boards, Shield for Arduino
XBee Shield V03 Module Wireless Control
- Stackable design, easy to plug into the ARDUINO development board.
- Coupled with the Arduino Bluetooth Bee Bluetooth module, and other Bluetooth devices can communicate Wirelessly.
- 3.3v and 5v dual power output.
- 3.3v and 5v IO compatible.
- USB2.0 protocol.
SKU: n/a -
-
Development Boards, Shield for Arduino
Proto Screw Shield 1.0 For Arduino Uno
- Arduino terminal to provide the IO, port connection.
- 3.81 posts quality, reliable, convenient, durable.
- Combined with the Proto Shield, the middle can be used as a prototype expansion board.
- Double-sided PCB Prototyping extended area vias connecting the front sides can be welded components.
- The middle section can be placed small bread plate, convenient test extend
SKU: n/a -
Development Boards, Shield for Arduino
ADK USB Host Shield compatible with Arduino
- Works with standard (dual 5/3.3V) and 3.3V-only (for example, Pro Arduino) boards.
- Complies with USB Specification Revision 2.0 (Full-Speed 12Mbps Peripheral, Full-/Low-Speed 12Mbps/1.5Mbps Host)
- Supports HID devices, such as keyboards, mice, joysticks, etc.
- Compatible with Mass storage devices, such as USB sticks, memory card readers, external hard drives (FAT32 Type File System – Mega Arduino only).
SKU: n/a -
Development Boards, Shield for Arduino
SHIELD-EKG-EMG
- Stackable connectors – up to 6 channels can be stacked and wired to A0-A6 analogue inputs.
- Calibration signal generation by D4/D9 digital output
- Precise trimmer potentiometer for calibration (all boards are shipped completely assembled, tested and calibrated so that you don’t have to do this unless you want to see how things works)
- Input connector for standard or active electrodes.
- Works with both 3.3V and 5V Arduino boards
SKU: n/a -
Development Boards, Kits compatible with Arduino
Uno Learning kit for Arduino
- All-in-one kit, a great starter kit for learning coding.
- Microcontroller ATmega328 (SMD) – Interface CH340G
- Operating Voltage: 5V
- Input Voltage (recommended): 7-12V
- Input Voltage (limits): 5-20V
- Digital I / O Pins 14 (of which 6 provide PWM output)
- Analog Input Pins: 6
SKU: n/a -
Development Boards, Kits compatible with Arduino
Advanced Kit for Arduino
- All-in-one kit, a great starter kit for learning to code.
- Model Type: UNO Rev R3
- Microcontroller Chip: ATmega328
- Input Voltage(Recommended): 7-12V
- Operating Voltage: 5
- Analog I/O Pins: 6
- Digital I/O Pins: 14 (of which 6 provide PWM output)
SKU: n/a -
Development Boards
UNO R3 CH340G ATMega328P compatible with arduino + Cable + Transparent Acrylic Case For Uno R3
-15%
Development BoardsUNO R3 CH340G ATMega328P compatible with arduino + Cable + Transparent Acrylic Case For Uno R3
- A basic Arduino Kit including everything to get started.
- It includes a quality proven Arduino Cable.
- It includes a strong and sturdy Transparent Acrylic Case.
- Microcontroller ATmega328 (SMD) – Interface CH340G
- Operating Voltage: 5V
- Input Voltage (recommended): 7-12V
- Digital I / O Pins 14 (of which 6 provide PWM output)
- Analog Input Pins: 6
SKU: n/a -
-
Development Boards
Uno R3 compatible with Arduino + Cable + Transparent acrylic case for Uno R3
- A basic Arduino Kit including everything to get started.
- It includes a quality proven Arduino Cable.
- It includes a strong and sturdy Transparent Acrylic Case.
- Micro-controller : ATmega328
- Operating Voltage: 5V
- Input Voltage (recommended) : 7-12V
- Digital I/O Pins: 14 (of which 6 provide PWM output)
- Analog Input Pins: 6
SKU: n/a -
Sensor Kits, Sensors
37 in 1 Sensors Kit compatible with Arduino
- For beginners who are interested in Arduino
- A complete set of Arduino’s most common and useful electronic components
- Infrared sensor receiving module
- Laser sensor module
- Temperature and humidity sensor module
- Infrared sensor module
- 5v relay module
- Obstacle avoidance sensor module.
SKU: n/a -
-
Arduino Single Boards Computer, Development Boards
L293D Motor Driver/Servo Shield for Arduino
1. Can drive 4 DC motors or 2 stepper motors or 2 Servos
2. 2 interface for 5V Servo connected to the high-resolution dedicated timer no jitter
2. Up to 4 bi-directional DC motors with individual 8-bit speed selection
4. Up to 2 stepper motors with single coil, double coil or interleaved stepping.
5. 4 H-Bridges: per bridge provides 0.6A (1.2A peak current) with thermal protection, can run motors on 4.5V to 36V DCSKU: n/a -
Arduino Single Boards Computer, Development Boards
Uno R3 CH340G ATmega328p Development Board Arduino
-40%
Arduino Single Boards Computer, Development BoardsUno R3 CH340G ATmega328p Development Board Arduino
- Microcontroller ATmega328 (SMD) Arduino compatible– Interface CH340G
- Operating Voltage: 5V
- Input Voltage (recommended): 7-12V
- Input Voltage (limits): 5-20V
- Digital I / O Pins 14 (of which 6 provide PWM output)
- Analog Input Pins: 6
SKU: n/a
GT511C3 Optical Fingerprint Scanner Module with cable
Mark4 5 inch 225mm carbon fiber frame kit
Raspberry Pi Zero v1.3 Development Board
Stripe Aluminum Cooling Case for Raspberry Pi 4, Built-In Active Radiator with Fins
Official Raspberry Pi Debug Probe
RD945 FPV Wireless 5.8GHZ 48CH Receiver
EDATEC 8MP 35mm M12 Raspberry Pi Lens
Nova PM Sensor SDS011 High Precision Laser pm2.5 Air Quality Detection Sensor
Arduino Nano Board R3 with CH340 chip (Unsoldered)
Raspberry PI POE+ Hat for 3B+ and Pi 4
1602 LCD Board Keypad Shield Blue Backlight
X2 ELF 88MM Micro brushless racing kit
PDB-XT60 with BEC 5V and 12V
APEX DC HD 5” FPV Frame Kit
Official Raspberry Pi 3 Case of Raspberry Pi 3 Model B and B+ (Red-White)
Raspberry Pi Pico H - Pico with Headers Soldered
L293D Motor Driver/Servo Shield for Arduino
Altera MAX II EPM240 CPLD Development Board
433Mhz 100mW Radio Telemetry Kit
BIGTREETECH BTT SKR MINI E3 V3.0 32 Bit Control Board for Ender 3/Ender 3 Pro/Ender 5/Ender 5 plus/CR-10
M5 FTD-05NO 100MM Laser, Micro Diffuse Reflectance, Photoelectric Switch, Laser Invisible Light
APM 2.8 Basic Flight Controller kit with GPS Module Combo Kit 














