Breakout Board
Showing all 18 results
-
ESP WIFI Modules
NodeMCU ESP8266 Serial Port Baseboard Lua WIFI Development Board
- The perfect solution for breaking out the pins from Lua V3 Nodemcu.
- Lead-out all the IO ports of the ESP-12E development board
- Lead out the pins of 5V and 3.3V power supply
- Convenient to connect with peripheral modules
- Onboard 5V / 1A DC-DC step-down converter circuit
- Onboard power indicator
- With DC power jack 6-24V.
SKU: n/a -
LED Module
CJMCU-123 WS2812 RGB LED Breakout Module
- Supply Voltage: 5V.
- Viewing angle: 120 degrees
- The color of the light was highly consistent
- Full-color module, Full-color soft lights a lamp strip.
- Built-in electric reset circuit and power lost reset circuit.
- Each pixel of the three primary colors can achieve 256 brightness levels, or 16M colors full-color display, and scan frequency not less than 400Hz/s.
SKU: n/a -
RGB LED Strips and Drivers
8 Bit WS2812 5050 RGB LED Built-in Full Color Driving Lights Circular Development Board
-25%
RGB LED Strips and Drivers8 Bit WS2812 5050 RGB LED Built-in Full Color Driving Lights Circular Development Board
- Outer Diameter: 32 mm.
- Supply Voltage: DC 4-7V.
- LED Driver IC: WS2812
- Communication interface: single wire communication.
- Send data at speeds of 800Kbps.
- The color of the light was highly consistent
- Full-color module, Full-color soft lights a lamp strip.
SKU: n/a -
RGB LED Strips and Drivers
16Bit WS2812B 5050 RGB LED Built-in Full Color Driving Lights Circular Development Board
-20%
RGB LED Strips and Drivers16Bit WS2812B 5050 RGB LED Built-in Full Color Driving Lights Circular Development Board
- Outer Diameter: 68 mm.
- Supply Voltage: DC 4-7V.
- LED driver chip: WS2812B
- Communication interface: single wire communication.
- Send data at speeds of 800Kbps.
- The color of the light was highly consistent
- Full-color module, Full-color soft lights a lamp strip.
SKU: n/a -
RGB LED Strips and Drivers
24 Bit WS2812 5050 RGB LED Built-in Full Color Driving Lights Circular Development Board
-27%
RGB LED Strips and Drivers24 Bit WS2812 5050 RGB LED Built-in Full Color Driving Lights Circular Development Board
- Outer Diameter: 86 mm.
- Supply Voltage: DC 4-7V.
- Communication interface: single wire communication.
- Send data at speeds of 800Kbps.
- The color of the light was highly consistent
- Full-color module, Full-color soft lights a lamp strip.
SKU: n/a -
Breakout Board
USB Type A Breakout Board – Male
If you want to add a standard type A USB male plug to your project, this breakout board is for you. As simple as it is, this board breaks out all 4 pins of the USB connector into more manageable 2.54mm pitch soldering holes. You can then solder a 4-pin header to plug into a breadboard or solder wires directly to the holes.
SKU: n/a -
Breakout Board
DC Power Module DC Power Adapter Plate
- Compatible with connector size: 5.5×2.1 mm.
- Weight: 2 gm
- Power output interface: 2 VCC, 2-way GND
- Reliable and safe connection
- Size: 26×12×13(L×W×H) mm
- Hole Diameter: 6.5mm
- Pin Diameter: 2.1mm
- It has wide use for safe and reliable connection between various Application and power sources
SKU: n/a -
-
Breakout Board
Frequency Adjustable Pulse Generator Module NE555
- Input Voltage: 5V-15VDC
- Output amplitude: 4.2V V-PP to 11.4V V-PP.
- Output Current : 15mA for 5V & 35mA for 12V.
- Color: Blue
- Working voltage: 5-12V
- Size: 25x 13 x 12 mm (LxWxH)
- Minimum – 50% duty cycle, 3.7 Hz & Maximum – 98% duty cycle, 1.3KHz
SKU: n/a -
Breakout Board
Serial Port Mini RS232 to TTL Converter Adaptor Module Board MAX3232-2pcs.
- High speed, replaceable MAX232 based. The device fitted supports up to 120kbps
- Works with PCs or Laptops
- Supports microcontroller UARTs – 5V TTL signal levels.
- Single DC supply: wide input range for 4201 or 5V for 4202 and 4203
- Small PCB footprint of 50´40mm
- Low current status LED(s)
- Very low power consumption
SKU: n/a -
-
Breakout Board
ESP-01 Adapter 3.3V 5V Board
- On-board level shift circuit
- Arduino UNO R3 and the compatible board can directly connect to this module;
- Interface logic voltage: 3.3V / 5V compatible(On-board level shift circuit);
- Working voltage: 4.5~5.5V (Onboard 3.3V LDO Regulator);
- Working current: 240mA(MAX).
SKU: n/a -
