Buck Converter
Showing all 19 results
-
Buck Converter
AMS1117 3.3V Power Supply Module
- Input: DC 4.5V – 12V (input voltage must be more than output voltage (more than 1V))
- Output: 3.3V, 800mA (load current cannot exceed 800ma)
- Onboard AMS1117 chip.
- Onboard power indicator to indicate power is turned on: Red LED.
- Small Compact Size, 4Pin Type, Breadboard Friendly.
- Dual-panel design, the layout is nice
SKU: n/a -
Buck Converter
AMS1117 5V Step-Down Power Supply Module
- Input: DC 6.5V – 12V (input voltage must be more than output voltage (more than 1V))
- Output: 5.0V (+-0.05v error), 800mA (load current cannot exceed 800ma)
- Onboard AMS1117 chip.
- Onboard power indicator to indicate power is turned on: Red LED.
- Small Compact Size, 4Pin Type, Breadboard Friendly.
- Dual-panel design, the layout is nice
SKU: n/a -
Buck Converter
AMS1117-3.3 LDO 800MA DC 5V to 3.3V Step-Down Power Supply Module
- Input Voltage: 4.5V to 15V
- Output Voltage: 3.3V to 5V
- Output Current: 800mA
- Onboard AMS1117 chip.
- Onboard power indicator to indicate power is turned on: Red LED.
- Output voltage interface, connection to facilitate the experimental.
- Small Compact Size, 3Pin Type, Breadboard Friendly.
SKU: n/a -
Buck Converter
Mini MP1584 DC-DC 3A Adjustable Buck Module (Made In India)
- Input Voltage: 4.5V – 28V
- Output Voltage: 0.8V – 20V
- Output Voltage Adjustment: On-board potentiometer
- Output Current: 1.8A (typical), 3.0A (max).
- Ceramic Capacitor Stable
- Internal Soft-Start
- Internally Set Current Limit without a Current Sensing Resistor
SKU: n/a -
Buck Converter
DC-DC 12V to 3.3V 5V 12V Power Module Multi Output Voltage Conversion
- Input Voltage: 12V
- Connector: 5.5mm DC Jack
- Output power on/off switch
- Two-row multiple pin outputs, easy to use and connect
- Outputs
- 3.3V DC at 800mA maximum current
- 5.0V DC at 800mA maximum current
- 12V DC (the 12V output is directly connected to the input, i.e. with 12VDC input, this output will be 12VDC; with 9VDC input, this output will be 9VDC)
SKU: n/a -
Buck Converter
Mini MP1584 DC-DC 3A Adjustable Buck Module
- Input Voltage: 4.5V – 28V
- Output Voltage: 0.8V – 20V
- Output Voltage Adjustment: On-board potentiometer
- Output Current: 1.8A (typical), 3.0A (max).
- Ceramic Capacitor Stable
- Internal Soft-Start
- Internally Set Current Limit without a Current Sensing Resistor
SKU: n/a -
-
Buck Converter
XL4015 5A DC-DC Step Down Adjustable Power Supply Buck Module LED with Heatsink
- Input voltage range: 4V-38V DC
- Output voltage range: 1.25V-36V DC adjustable.
- Output current: 0-5A.
- Output power: 75W.
- High efficiency up to 96%
- The built-in thermal shutdown function
- Built-in current limit function
- In-Built output short protection function
SKU: n/a -
-
Buck Converter
Dual USB Output 9V / 12V / 24V / 36V Car Charger Switch 5V DC-DC Power Supply Module 3A Buck Regulator
-29%
Buck ConverterDual USB Output 9V / 12V / 24V / 36V Car Charger Switch 5V DC-DC Power Supply Module 3A Buck Regulator
- Input : 6V-40V
- Output : 5V / 3A (MAX)
- Efficiency : 92% (MAX)
- Switching frequency : 150KHZ
- High efficiency and low ripple.
- With USB power indicator light.
- Maximum output 3A (at the same time with two mobile phones).
SKU: n/a -
Buck Converter
LM2596 2A Buck Step-down Power Converter Module DC 4 ~ 40 to 1.3-37V LED Voltmeter
-26%
Buck ConverterLM2596 2A Buck Step-down Power Converter Module DC 4 ~ 40 to 1.3-37V LED Voltmeter
- Input Voltage(VDC): 4 ~ 40.
- Output Voltage(VDC): 1.3 ~ 37.
- Output Current: 2A Rated, ( 3A maximum with heat sink).
- Switching Frequency: 150 kHz.
- Input reverse polarity protection.
- Built-in output short protection function.
SKU: n/a -
Buck Converter
5A Constant Current / Voltage LED Drives Lithium Battery Charging Module
- Input Voltage Range: 4-38V
- Output Voltage Range: 25-36V continuously adjustable
- Output current: adjustable, up to 5A
- Output power: up to 75W
- Working temperature :-40 ~ + 85 degrees
- Working frequency: 180KHz
SKU: n/a -
Buck Converter
DC-DC 4.5-40V To 5V 2A USB Charger Step down Converter Voltmeter Module
- Input voltage: DC 4.5 ~ 40V.
- Output voltage: 5V (when the input voltage is between 6.5V ~ 40V).
- Output current: 2A.
- The voltmeter has an automatic calibration function.
- With reverse connection protection.
- With overheat protection and short circuit protection.
SKU: n/a -
Buck Converter
XL4015 5A Step Down Adjustable Power Supply with LED Voltmeter
- Better than 2596, easy to 4A 50W, up to 75W adding the heat sink.
- Over-temperature protection: Yes (shutdown output automatically after over temperature).
- Input voltage: 4V ~ 38V (not more than 38V).
- Output voltage: 1.25V ~ 36V (adjustable).
- Output current: 0A ~ 5A (recommended below 4.5A).
SKU: n/a -
Power Supply, Switch Mode Power Supply
150W AC-DC Buck Converter 100V-240V to 24V 6A-9A Step Down Power Supply Module
-13%
Power Supply, Switch Mode Power Supply150W AC-DC Buck Converter 100V-240V to 24V 6A-9A Step Down Power Supply Module
- Input Voltage : AC 100 – 240 V(50 HZ/60 HZ).
- Output Voltage: DC 24V.
- Output Current : 6A to 9A (no voltage drop).
- Output Power : 150W (maximum 220 W).
- Overload Protection: Yes.
- Over Current Protection : Yes.
- Short Circuit Protection: Yes.
SKU: n/a -
Buck Converter, Modules and Displays
DC-DC 0-32V 12A, Constant Current LCD, Digital Display, Adjustable Voltage Buck, Step Down Power, Supply Module Board, （With Case）
-15%
Buck Converter, Modules and DisplaysDC-DC 0-32V 12A, Constant Current LCD, Digital Display, Adjustable Voltage Buck, Step Down Power, Supply Module Board, （With Case）
- Working Voltage: DC 5.3V-32V
- Output Voltage: DC 1.2V-32V
- Output Current: 12A (12A need a heat sink, 8A is stable for long time)
- Output Power: 160W(160W need heat sink, 120W is for 8A)
- Voltage Display Range: 0 -32V
- Voltage Display Precision: ±0.5V
- Voltage Display Resolution: 0.05V
- Current Display Range: 0 -12A
- Current Display Precision: ±0.3A
- Voltage Display Resolution: 0.01A
- Conversion efficiency: About 96%
SKU: n/a
