Development Board
Showing 1–24 of 29 results
-
ESP WIFI Modules
ESP8266 NodeMCU CP2102 Board
- Open-source, Interactive, Programmable, Low cost, Simple, Smart, WI-FI enabled
- Arduino-like hardware IO
- Integrated TR switch, balun, LNA, power amplifier and matching network
- Integrated PLL, regulators, DCXO and power management units
- Onboard USB to serial chip to easily program and upload codes from the Arduino IDE
- Embeds logic level converter circuits
- Has onboard 3.3V regulator to ensure enough power to function as your go-to WiFi chip!
- Easy access to the GPIO pins for easy prototyping
- ESP-12E Processor
- Easy to use breadboard friendly form factor
SKU: n/a -
ESP WIFI Modules
NodeMCU ESP8266 Serial Port Baseboard Lua WIFI Development Board
- The perfect solution for breaking out the pins from Lua V3 Nodemcu.
- Lead-out all the IO ports of the ESP-12E development board
- Lead out the pins of 5V and 3.3V power supply
- Convenient to connect with peripheral modules
- Onboard 5V / 1A DC-DC step-down converter circuit
- Onboard power indicator
- With DC power jack 6-24V.
SKU: n/a -
-
Development Boards, Single Board Computer, Udoo Board
Udoo Neo Basic Development Board
- NXP i.MX 6SoloX applications processor with an embedded ARM Cortex-A9 core and a Cortex-M4 Core
- Integrated 2d/3d graphics controller
- Micro HDMI interface – LVDS interface + touch (I2C signals)
- Analogue camera connection supporting NTSC and PAL – 8-bit parallel camera interface
- MicroSD card slot onboard – 8-bit SDIO interface
- HDMI audio transmitter – S/PIDF & I2S
- Green Power Status LED – User Configurable LEDs (Red and Orange)
- Arduino-Compatible through the standard Arduino Pins layout and compatible with Arduino shields
SKU: n/a -
Development Boards, Programmer
PIC K150 USB Automatic Develop Microcontroller Programmer with ICSP Cable (Body width: 4 mm)
-10%
Development Boards, ProgrammerPIC K150 USB Automatic Develop Microcontroller Programmer with ICSP Cable (Body width: 4 mm)
- Support the most popular programming PIC chips, read, encryption and other features!
- No external power supply, communication, and power is only a USB cable to print complete, without any cable.
- PICSTARTPLUS much faster rate than programming.
- Can easily read the contents of the chip program area.
- Automatic programming verification.
- Comprehensive information prompts, allowing users to understand the working state.
SKU: n/a -
Development Boards, Programmer
PICkit3 Debugger Programmer Emulator Controller Development Board
- Full-speed USB support using Windows standard drivers
- Real-time execution
- Processors run at maximum speeds
- Built-in over-voltage/short circuit monitor
- Low voltage to 5V (1.8 to the 5V range)
- Read/write program and data memory of the microcontroller
- Program up to 512K byte flash.
SKU: n/a -
ARM Microcontroller, Development Boards
Core Board STM8S103F3P6 STM8 Development Board Minimum System Board
-12%
ARM Microcontroller, Development BoardsCore Board STM8S103F3P6 STM8 Development Board Minimum System Board
- Chipboard STM32F103C8T6
- On board, SWIM interface and reset button
- Micro USB line or the 2.54 pin to link to the power with the input voltage 4.5V-15V.
- Power light and the Demo indicator light
- Leads all the pins and has detailed label for the Pins.
- Support SWIM debug mode.
SKU: n/a -
Advance Development Boards, Development Boards
BIGTREETECH BTT CB1 Development Board
- CPU :Allwinner H616, quad core Cortex-A53
- GPU :Mali G31 MP2, also supports OPENGL3.2
- RAM : 1GB DDR3L SDRAM
- Screen : supports HDMI2.0A, 4K display
- Interface :USB2.0
- Network Connection :100M Ethernet + 100M WiFi
SKU: n/a -
Development Boards, Kits compatible with Arduino
Uno Learning kit for Arduino
- All-in-one kit, a great starter kit for learning coding.
- Microcontroller ATmega328 (SMD) – Interface CH340G
- Operating Voltage: 5V
- Input Voltage (recommended): 7-12V
- Input Voltage (limits): 5-20V
- Digital I / O Pins 14 (of which 6 provide PWM output)
- Analog Input Pins: 6
SKU: n/a -
Development Boards, Kits compatible with Arduino
Arduino Uno R3 Beginners Kit
- Great for Starting with Arduino Programming
- A variety of components are included in this pack to try out different projects.
- All-in-one kit, a great starter kit for learning to code.
- Microcontroller ATmega328 (SMD) – Interface CH340G
SKU: n/a -
Development Boards, Kits compatible with Arduino
Advanced Kit for Arduino
- All-in-one kit, a great starter kit for learning to code.
- Model Type: UNO Rev R3
- Microcontroller Chip: ATmega328
- Input Voltage(Recommended): 7-12V
- Operating Voltage: 5
- Analog I/O Pins: 6
- Digital I/O Pins: 14 (of which 6 provide PWM output)
SKU: n/a -
Boards Compatible with Arduino, Development Boards
UNO R3 CH340G ATMega328P compatible with arduino + Cable + Transparent Acrylic Case For Uno R3
-15%
Boards Compatible with Arduino, Development BoardsUNO R3 CH340G ATMega328P compatible with arduino + Cable + Transparent Acrylic Case For Uno R3
- A basic Arduino Kit including everything to get started.
- It includes a quality proven Arduino Cable.
- It includes a strong and sturdy Transparent Acrylic Case.
- Microcontroller ATmega328 (SMD) – Interface CH340G
- Operating Voltage: 5V
- Input Voltage (recommended): 7-12V
- Digital I / O Pins 14 (of which 6 provide PWM output)
- Analog Input Pins: 6
SKU: n/a -
Boards Compatible with Arduino, Development Boards
Pro Micro 5V 16M Mini Leonardo Microcontroller Development Board For Arduino
-15%
Boards Compatible with Arduino, Development BoardsPro Micro 5V 16M Mini Leonardo Microcontroller Development Board For Arduino
- ATMEGA32U4 running in 5V / 16MHz
- Support Arduino IDE V1.0.1
- Micro USB interface programming on the board
- Four 10-bit ADC pin
- 12 digital I / O (5 PWM capability)
- Rx and Tx hardware serial connection
SKU: n/a -
Boards Compatible with Arduino, Development Boards
Uno R3 compatible with Arduino + Cable + Transparent acrylic case for Uno R3
-13%
Boards Compatible with Arduino, Development BoardsUno R3 compatible with Arduino + Cable + Transparent acrylic case for Uno R3
- A basic Arduino Kit including everything to get started.
- It includes a quality proven Arduino Cable.
- It includes a strong and sturdy Transparent Acrylic Case.
- Micro-controller : ATmega328
- Operating Voltage: 5V
- Input Voltage (recommended) : 7-12V
- Digital I/O Pins: 14 (of which 6 provide PWM output)
- Analog Input Pins: 6
SKU: n/a -
-
Boards Compatible with Arduino, Development Boards
LilyPad 328 ATmega328P Main Board 16M Compatible with Arduino
-13%
Boards Compatible with Arduino, Development BoardsLilyPad 328 ATmega328P Main Board 16M Compatible with Arduino
- Microcontroller: ATmega168 or ATmega328V
- Operating Voltage: 2.7-5.5 V
- Digital I/O Pins: 14
- PWM Channels: 6
- Analog Input Channels: 6
- DC Current per I/O Pin: 40 mA
- Board will run from 2V to 5V.
- The latest version of the LilyPad supports automatic reset for even easier programming.
- The back side of the LilyPad is now completely flat!
SKU: n/a -
Boards Compatible with Arduino, Development Boards
Adafruit Feather M4 Express – Featuring ATSAMD51 – ATSAMD51 Cortex M4
-7%
Boards Compatible with Arduino, Development BoardsAdafruit Feather M4 Express – Featuring ATSAMD51 – ATSAMD51 Cortex M4
- ATSAMD51 32-bit Cortex M4 core
- 512 KB flash, 192 KB RAM
- 3.3V regulator with 500mA peak current regulator
- USB bootloader and serial port debugging
- Built-in 100mA lipoly charger with charging status indicator LED
SKU: n/a -
Development Boards, Programmer
Altera MAX II EPM240 CPLD Development Board
- Onboard the EPM240T100C5N chip.
- EPROM chip configuration using EPCS4, the size of 8Kbit.
- Onboard 50M active patch crystal (Crystal Slaughter halfback).
- Power supply with a largemouth outlet, single 5V power supply.
- Board has a power indicator and reset switch.
- More IO ports and clock pins through the pin leads through these interfaces can be extended to any memory and peripherals.
SKU: n/a -
Arduino Boards and Accessories
Mega2560 Pro ATMEGA2560-16U USB CH340G Development Board
- The board is compatible with Mega 2560.
- Excellent solution for developing projects based on ATmega2560.
- The board can be powered directly through the Micro USB connector
- The maximum output current upon 5V is around 800mA, while on the 3.3V it is about 800mA.
SKU: n/a -
ARM Microcontroller, Development Boards
Digispark ATTINY85 USB Development Board
- The Onboard, 150 ma 5 v Regulator.
- 8 k Flash Memory (about 6k after bootloader).
- The I2C and SPI (vis USI).
- The Power LED and the Test/Status LEDs.
- Built-in USB and serial were debugging).
- Support for the Arduino IDE 1.0 + (OSX/Windows/Linux)
SKU: n/a -
