ESP8266 series
Showing all 17 results
-
ESP WIFI Modules
Olimex ESP8266 EVB-BAT
- Includes MOD-WIFI-ESP8266-DEV
- Relay 10A/250VAC (15A/120VAC 15A/24VDC) with connector and status LED
- Big button for easier access to UART mode
- LiPo battery connector with built-in LiPo charger and status LEDs
- Step up converter
- Power jack for +5V external power supply
- UEXT connector
- 20-pin connector CON1 with ESP8266’s signals
- PCB dimensions: (2.0 x 2.2)” ~ (51 x 57)mm
SKU: n/a -
ESP WIFI Modules
ESP8266 NodeMCU CP2102 Board
- Open-source, Interactive, Programmable, Low cost, Simple, Smart, WI-FI enabled
- Arduino-like hardware IO
- Integrated TR switch, balun, LNA, power amplifier and matching network
- Integrated PLL, regulators, DCXO and power management units
- Onboard USB to serial chip to easily program and upload codes from the Arduino IDE
- Embeds logic level converter circuits
- Has onboard 3.3V regulator to ensure enough power to function as your go-to WiFi chip!
- Easy access to the GPIO pins for easy prototyping
- ESP-12E Processor
- Easy to use breadboard friendly form factor
SKU: n/a -
ESP WIFI Modules
ESP8266/ ESP-12F Module/ Serial WIFI Witty Cloud Development Board + MINI nodeMCU
-21%
ESP WIFI ModulesESP8266/ ESP-12F Module/ Serial WIFI Witty Cloud Development Board + MINI nodeMCU
- LDR Light Sensor on board
- WS2812 Led on board
- Includes CH340G USB-to-UART programmer
- Includes LDR (light dependent resistor a.k.a photoresistor) connected to ESP’s ADC pin
- Supports 3 modes: AP,STA,AP+STA
- Dimensions: 24mm x 16mm
- Micro USB connection for power and/or programming
SKU: n/a -
ESP WIFI Modules
WeMos ESP8266 D1 R2 V2.1.0 WiFi Development Board
- Microcontroller: ESP8266EX
- Operating Voltage: 3.3V
- Digital I/O Pins: 11 (all I/O pins have interrupt/PWM/I2C/one-wire capability, except for D0)
- Analog Input Pins: 1
- Flash Memory: 4MB
- On-Board Switching Power Supply:
- Input Voltage Range: 9V to 12V
- Output: 5V at 1A Max
SKU: n/a -
ESP WIFI Modules
DOIT Mini Ultra-Small size ESP-M3 Serial WiFi Module Compatible with ESP8266
- Derived from ESP8266, ESP8285 has a flash memory of 1MB
- Operating Voltage: 3.3V
- Totally compatible with ESP8266
- WiFi support 802.11 b/g/n/e/i
- High temperature resistant, working temperature: -40℃-125℃
SKU: n/a -
ESP WIFI Modules
ESP-12E: ESP8266 Serial Port WIFI Wireless Transceiver Module For Arduino
- WS2812 Led on board.
- 802.11 b/g/n
- Wi-Fi Direct (P2P), soft-AP
- Integrated TCP/IP protocol stack
- Integrated TR switch, balun, LNA, power amplifier and matching network
- Integrated PLL, regulators, DCXO and power management units
SKU: n/a -
ESP WIFI Modules
ESP-01 ESP8266 Serial WIFI Wireless Transceiver Module
- 802.11 b/g/n Standards
- Wi-Fi Direct (P2P), soft-AP
- 1MB Flash Memory
- Integrated low power 32-bit CPU could be used as an application processor
- A-MPDU & A-MSDU aggregation & 0.4ms guard interval
- Wake up and transmit packets in < 2ms
- Standby power consumption of < 1.0mW (DTIM3)
SKU: n/a -
ESP WIFI Modules
NodeMCU ESP8266 Serial Port Baseboard Lua WIFI Development Board
- The perfect solution for breaking out the pins from Lua V3 Nodemcu.
- Lead-out all the IO ports of the ESP-12E development board
- Lead out the pins of 5V and 3.3V power supply
- Convenient to connect with peripheral modules
- Onboard 5V / 1A DC-DC step-down converter circuit
- Onboard power indicator
- With DC power jack 6-24V.
SKU: n/a -
ESP WIFI Modules
ESP-12F ESP8266 Wifi Wireless IoT Board Module
- Communication interface voltage: 3.3V
- Working current: 240mA(MAX)
- Serial port baud rate: 115200 (default), can be modified to other values by AT command
- Serial communication format: 8N1
- Wireless Network Mode: station / softAP / SoftAP + station
- Wireless criteria: 802.11 b / g / n
- WIFI @ 2.4 GHz, support for WPA / WPA2 security mode
- +19.5dBm output power
SKU: n/a -
-
-
-
-
-
