Flight Controller & Accessories
Showing all 20 results
-
Drone Parts, Flight Controller & Accessories
SP Racing F3 Flight Controller Integrate OSD ACRO Version
-10%
Drone Parts, Flight Controller & AccessoriesSP Racing F3 Flight Controller Integrate OSD ACRO Version
- STM32F303 CPU, 72Mhz inc FPU
- CPU: STM32F303, 72Mhz inc FPU
- Acro: High-Capacity Flash
- Accelerometer/gyro: MPU6050
- Board size: 36 x 36 x 5mm (without shell)
- Board weight: 5.9g
- Weight: 22 gm(with all accessories)
SKU: n/a -
Drone Parts, Flight Controller & Accessories
Holybro Original Pixhawk PX4 Flight Controller (without GPS)
-6%
Drone Parts, Flight Controller & AccessoriesHolybro Original Pixhawk PX4 Flight Controller (without GPS)
- Main FMU Processor: STM32F76
- 32 bit ARM® Cortex® M7, 216 MHz Processor running NuttX RTOS,
- More computing power and 2X the RAM than previous versions)
- Abundant connectivity options for additional peripherals (UART, I2C, CAN)
- Redundant power supply inputs and automatic failover
- External safety button for easy motor activation
- New sensors with higher temperature stability
- Multicolor LED indicator
- Integrated vibrations isolation
- High-power, multi-tone piezo audio indicator
- microSD card for long-time high-rate logging
SKU: n/a -
-
Drone Parts, Flight Controller & Accessories
Naze 32 Full REV6 Flight Controller with Compass & Barometer
-5%
Drone Parts, Flight Controller & AccessoriesNaze 32 Full REV6 Flight Controller with Compass & Barometer
- 2000 degrees/second 3-axis MEMS gyro + accelerometer (MPU6500).
- Input voltage: Max 16V on input rail and up to 35V 6s on the voltage sense line.
- Fully pinout compatible with rev5 accessories (OSDoge etc).
- SBUS Inverter.
- Sonar pads w/resistors added for direct connection to 5V sonar.
- MS5611 barometer.
- 128mbit flash.
SKU: n/a -
Drone Parts, Flight Controller & Accessories
Micro Minim OSD For Racing F3 Naze32 Flight Controller RC Drone
-12%
Drone Parts, Flight Controller & AccessoriesMicro Minim OSD For Racing F3 Naze32 Flight Controller RC Drone
- ATmega328P with Arduino bootloader.
- MAX7456 monochrome on-screen display.
- +5V 500mA regulator for up to +12V supply input.
- FTDI cable compatible pinout.
- The standard 6-pin ISP header.
- Standalone, or with APM/ Flip / Flip32+ flight controllers.
SKU: n/a -
Drone Parts, Flight Controller & Accessories
SP Racing F3 Flight Controller Deluxe
- Stackable design – perfect for integrating with OSDs and power distribution boards.
- 16 PWM I/O lines for ESCs, Servos and legacy receivers. 8 available on standard pin headers. 8 via side mounted connectors.
- Full support for OneShot ESCs for easy PID tuning and a sharper response.
- Supports SBus, SumH, SumD, Spektrum1024/2048, XBus, PPM, PWM receivers.
- No external inverters required (built-in).
- Dedicated output for programmable LEDs – great for orientation, racing and night flying.
- Dedicated I2C port for connection of OLED display without needing flight battery.
- Battery monitoring ports for voltage and current.
- Sonar support for precision low-altitude hold.
- Buzzer port for audible warnings and notifications.
- Symmetrical design for a super tidy wiring.
- Barometer mounted on the bottom of the board for easy wind isolation.
- Wire up using pin headers, JST-SH sockets or solder pads. Use either right-angled or straight pin-headers.
SKU: n/a -
Drone Kit, Flight Controller & Accessories
F4 Pro V2 V3.5 v3s Flight Control Built-in OSD / BEC
- Product: Flight Controller
- SPI Gyro IC268G
- On-Board OSD (controllered by Betaflight, FC over SPI bus)
- MicroSD Blackbox
- Baro (BMP280)( default is closed,need to open in configuration,if not know how to open,contact with us)
SKU: n/a -
Drone Parts, Flight Controller & Accessories
F3 EVO V2.0 Flight Control
- Supported Receiver Input Signal: PPM, SBUS, DSM
- Support PPM, SBUS, DSM receiver input signal
- Battery voltage detection and buzzer interface
- Large current NMOS transistors, operating current can reach 10A or higher
- Use STM32F303CCT6 + MPU6500, advanced hardware platform F3 for higher flight stability
SKU: n/a -
-
Drone Parts, Flight Controller & Accessories
OpenPilot CC3D EVO Flight Controller Straight Pin
- 3-axis high-performance MEMs gyros and 3-axis high-performance MEMs accelerometer.
- Tiny 36 x 36 mm 4 layer PCB for superior electrical noise reduction and flight performance.
- Software support for Windows, Mac, and Linux.
- Direct high-speed USB support with no drivers required, a true plug and play device.
- Spektrum satellite receiver support.
- Futaba S-BUS hardware support.
- Innovative Flexi-port technology for superior port flexibility.
- 4Mbits onboard EEPROM for configuration storage.
SKU: n/a -
Drone Parts, Flight Controller & Accessories
SP RACING F3 FC Replacement Accessories Set
Accessories compatible with SP RACING F3 Flight Controller Module
High-quality cable and connectors.
1 x 3*8 Burg connector(Straight)
1 x 3*8 Burg connector(Right-angle)
1 x 1*10 Burg Connector(Straight)
2 x 2pt cable
2 x 4pt cable
2 x 8pt cableSKU: n/a -
Drone Parts, Flight Controller & Accessories
Pixhawk I2C Port Expand Board with Cable
- Package Weight: 5 gm
- Number of Ports: 5.
- Board Dimensions: 33 x 12 x 6 mm(LxWxH)
- Net Weight: 3g
- Brand new and high quality
- The I2C splitter expands the I2C port to allow up to four additional peripherals to connect to Pixhawk.
SKU: n/a -
-
Drone Parts, Flight Controller & Accessories
DF13 4 Pin Flight Controller Cable
- Item Name: DF13 4 Pin Flight Controller Cable
- 100% Brand new and high quality.
- Weight: about 3g
- Plug Type: DF 13 4 pin
- Length: 200mm(28AWG).
- Color: Red, and Black
- Useful for connection between the PixHawk and the GPS receiver module. or many receiver connections.
SKU: n/a -
Drone Parts, Flight Controller & Accessories
DF13 6 Pin Flight Controller Cable
- Item Name: DF13 6 Pin Flight Controller Cable
- 100% Brand new and high quality.
- Weight: about 3g
- Plug Type: DF 13 6 pin
- Length: 200mm(26AWG).
- Color: Red, and Black
- Useful for connection between the PixHawk and the GPS receiver module. or many receiver connections.
SKU: n/a
