LCD
Showing all 21 results
-
Boards Compatible with Arduino, Display for Arduino
1602 LCD Board Keypad Shield Blue Backlight
- Provides a user-friendly interface that allows users to go through the menu, make selections etc.
- It consists of a 1602 white character blue backlight LCD.
- The keypad consists of 6 keys select, up, right, down, left and reset.
- To save the digital IO pins, the keypad interface only uses one ADC channel.
- The key value is read out through a 5 stage voltage divider.
SKU: n/a -
-
-
-
-
-
-
3D Printer, 3D Printer Display and Controller
2004 LCD Display RepRapDiscount Smart Controller with Adapter
-14%
3D Printer, 3D Printer Display and Controller2004 LCD Display RepRapDiscount Smart Controller with Adapter
- RAMPS 1.4 2004 LCD Display intelligent controller.
- LED background light control circuit, a small function of the intelligent controller,
- With pin short time to decide on all LED turn or steering 30 seconds
- You can turn on the light time to do the long or short form of the adjustment TRIMM R4100K from 10 seconds to 2 minutes.
- Plug and play on the RAMPS, but need to modify the firmware to support.
- The product comes encoder parameter adjustment can be achieved, and the file selection print.
- With an SD card base on the back, put slicing file into the SD card and select the file on the LCD, then can be printing.
SKU: n/a -
3D Printer, 3D Printer Display and Controller
3D printer 128×64 Smart LCD controller for ramps 1.4
-9%
3D Printer, 3D Printer Display and Controller3D printer 128×64 Smart LCD controller for ramps 1.4
- RAMPS 1.4 LCD 12864 intelligent controller.
- With an SD card base on back.
- Large screen display 128×64 LCD (3.2″)
- SD card slot at the back, able to directly select a file and print
- The product comes encoder parameter adjustment can be achieved, and the file selection print
- Plug & play on the RAMPS, but need to modify the firmware to support.
- LCD 12864 Smart Controller fully supported by Marlin Firmware.
SKU: n/a -
Development Boards, RASPBERRY PI, Raspberry Pi Displays
10.1 Inch IPS LCD Touch Screen 1280×800 with Driver Board Kit for Raspberry Pi
-8%
Development Boards, RASPBERRY PI, Raspberry Pi Displays10.1 Inch IPS LCD Touch Screen 1280×800 with Driver Board Kit for Raspberry Pi
- Operating voltage: 12V
- Current requirement: 1A-2A
- Rated power: 6-7W
- HDMI input: version HDMI 1.1
- VGA input: 1280×800 physical resolution
- Brightness: 350 lumens
- Panel type: TFT
- Display Type: Capacitive Touch Display
- Number of wiring: 40 PIN LVDS
- Backlight: LED
SKU: n/a
