Nano
Showing all 8 resultsSorted by popularity
-
Development Boards
Nano V3.0 CH340 Chip with Mini USB Cable Compatible with Arduino (Unsoldered)
-12%
Development BoardsNano V3.0 CH340 Chip with Mini USB Cable Compatible with Arduino (Unsoldered)
- Operating Voltage (logic level): 5V
- With Mini USB
- 8 analog inputs ports: A0 ~ A7
- 14 Digital input / output ports: TX, RX, D2 ~ D13
- 1 pair of TTL level serial transceiver ports RX / TX
- Using Atmel Atmega328P-AU MCU
- There is a bootloader installed in it
- Standard 0.1” spacing DIP (breadboard friendly).
- Manual reset switch.
SKU: n/a -
Development Boards
Nano CH340 Chip Board Without USB Cable Compatible with Arduino (Soldered)
- Operating Voltage (logic level): 5V
- With Soldered Connector
- 8 analog inputs ports: A0 ~ A7
- 14 Digital input / output ports: TX, RX, D2 ~ D13
- 1 pair of TTL level serial transceiver ports RX / TX
- Using Atmel Atmega328P-AU MCU
- There is a bootloader installed in it
- Standard 0.1” spacing DIP (breadboard friendly).
- Manual reset switch.
SKU: n/a -
Development Boards
Nano R3 W/O USB Cable Compatible with Arduino (Un Soldered)
- Operating Voltage (logic level): 5V
- 8 analog inputs ports: A0 ~ A7
- 14 Digital input / output ports: TX, RX, D2 ~ D13
- 1 pair of TTL level serial transceiver ports RX / TX
- Using Atmel Atmega328P-AU MCU
- There is a bootloader installed in it
- Standard 0.1” spacing DIP (breadboard friendly).
- Manual reset switch.
SKU: n/a -
Development Boards
Nano R3 W/O USB Cable Compatible with Arduino (Soldered)
- Operating Voltage (logic level): 5V
- With Soldered Connector
- 8 analog inputs ports: A0 ~ A7
- 14 Digital input / output ports: TX, RX, D2 ~ D13
- 1 pair of TTL level serial transceiver ports RX / TX
- Using Atmel MEGA328PB-U (Nano)
- There is a bootloader installed in it
- Standard 0.1” spacing DIP (breadboard friendly).
- Manual reset switch.
SKU: n/a -
Official Arduino Boards
Nano Board R3 with CH340 Chip without USB Cable Compatible with Arduino (Unsoldered)
-6%
Official Arduino BoardsNano Board R3 with CH340 Chip without USB Cable Compatible with Arduino (Unsoldered)
- Operating Voltage (logic level): 5V
- 8 analog inputs ports: A0 ~ A7
- 14 Digital input / output ports: TX, RX, D2 ~ D13
- 1 pair of TTL level serial transceiver ports RX / TX
- Using Atmel Atmega328P-AU MCU
- Standard 0.1” spacing DIP (breadboard friendly).
SKU: n/a -
Arduino Single Boards Computer, Development Boards
Arduino Nano Board R3 with CH340 chip (Unsoldered)
-44%
Arduino Single Boards Computer, Development BoardsArduino Nano Board R3 with CH340 chip (Unsoldered)
The Arduino Nano Board R3 with CH340 is another popular Arduino development board very much similar to the Arduino UNO They use the same Processor (Atmega328p) and hence they both can share the same program.
SKU: n/a -
Arduino Single Boards Computer, Development Boards
Arduino Nano Board R3 with CH340 chip (soldered pin)
-22%
Arduino Single Boards Computer, Development BoardsArduino Nano Board R3 with CH340 chip (soldered pin)
- The Arduino Nano Board R3 with CH340 is another popular Arduino development board very much similar to the Arduino UNO They use the same Processor (Atmega328p) and hence they both can share the same program.
SKU: n/a
EasyMech Black Acrylic Case for 7-Inch Touch Screen Display
Winsen MH-Z19C NDIR CO2 Sensor for HVAC and IAQ
Waveshare 5inch 800×480 Capacitive Touch Display for Raspberry Pi with DSI Interface
SeeedStudio Grove Base Kit for Raspberry Pi
Raspberry Pi Pico W
E32-900T30D LoRa 862 to 915 MHz SX1276 Wireless Transmitter and Receiver RF Module
Official Raspberry Pi 5 Active Cooler 



