Sensors
Showing all 18 results
-
Temperature & Humidity Sensor
Flame Sensor Module
- Comparator chip LM393 makes module readings stable.
- Operating voltage 3.3V-5V.
- Fast Response Time
- Sensitivity adjustable
- Detects a flame or a light source of a wavelength in the range of 760nm-1100 nm.
- Detection range: up to 100 cm.
- Adjustable detection range.
- Detection angle about 60 degrees, it is sensitive to the flame spectrum.
SKU: n/a -
-
-
Sound Sensor
LM393 Sound Detection Sensor Module – Black
- Working voltage: DC 3.3-5V.
- IC Chip: LM393
- Signal output indication.
- The output is digital.
- Single channel signal output.
- With the retaining bolt hole, convenient installation.
- Output low level and the signal light when there is sound.
SKU: n/a -
Light/color Sensor
CJMCU-34725 TCS34725 Color Sensor RGB Module
- Operating Voltage: 3.3V
- Supply Voltage: 3.3V-5V
- The TCS3472 device provides digital return values for red, green, blue (RGB) and bright light sensing
- Color management is more accurate.
- The high sensitivity.
- Wide dynamic range.
- IR shading filters make the TCS3472 ideal.
SKU: n/a -
Light/color Sensor
TCS3200 Color Recognition Sensor Module for MCU Arduino
- Operating Voltage: 3V-5V
- High-resolution conversion of light intensity to frequency.
- Chip pins all has drawn for standard 100.
- Put the needle (2.54 mm).
- Mil-convenient for bitmap board.
- Programmable color and full-scale output frequency.
- Communicate directly with a microcontroller.
- Low-profile surface mount package.
SKU: n/a -
Rotary Encoder
Speed Measuring Sensor Groove Coupler Module For Arduino
- Using imported groove optical coupling sensor, width 5mm.
- It has the output state light, if output high level, the lights are off. if output low level, it on.
- If it covered, it will output high level; otherwise, its output low level.
- Good signal and waveform, with a strong driving ability for more than 15mA.
- Equipped with a fixed bolt hole, easy install.
- Use the LM393 wide voltage comparer.
SKU: n/a -
-
Proximity Sensor
MC-38 Wired Door Window Sensor Magnetic Switch Home Alarm System
- Actuation Distance: 15 – 25 mm;
- Connecting cable length: 30 cm.
- Connection Type: Normally Close
- Magnetic sensor alarm, control the switch of the circuit via the built-in magnet
- Alarm when someone intrudes into your places
- Can be used in places like apartments, hotels, offices, wardrobe etc.
SKU: n/a -
-
Biometric/ECG/EMG Sensor, Sensors
GT511C3 Optical Fingerprint Scanner Module with cable
- Finger window: 16.5 x 12.5 mm.
- Image Size: 202 x 258 Pixels.
- Storage capacity: 200 fingerprints.
- Resolution: 450 dpi.
- CPU: ARM Cortex M3 Core MCU).
- Size of Template: 496 Byte(Template) + 2 Byte(Template).
SKU: n/a -
-
Sensors, Sound Sensor
Speak (Voice) Recognition Module V3 compatible with Arduino
- Supply Voltage: 4.5 – 5.5 V.
- Current : <40 mA.
- Digital Interface : 5V TTL level for UART interface and GPIO.
- Support maximum 80 voice commands, with each voice 1500ms (one or two words speaking).
- Maximum 7 voice commands effective at same time.
- Arduino library is supplied.
- User-control General Pin Output.
SKU: n/a -
-
Sensors, Ultrasonic Sensors and Modules
MAXBOTIX MB7137 I2CXL-TrashSonar-WR Ultrasonic Sensor Range Finder Sonar
-8%
Sensors, Ultrasonic Sensors and ModulesMAXBOTIX MB7137 I2CXL-TrashSonar-WR Ultrasonic Sensor Range Finder Sonar
- Operating Voltage: 3-5.5 V
- Object Sensing Range: 0-350 cm
- Sonar Sensing Range: 20-350 cm
- Max. Sensing Range: 350 cm
- Read Rate: 20 Hz
- Frequency: 42 KHz
- Weather Resistant.
- IP67 Protection
SKU: n/a
