temperature Controller
Showing all 11 results
-
Temperature & Humidity Sensor
Flame Sensor infrared Receiver Ignition source detection module
- Output Channel: 1
- Power Supply: 3.3/5V
- Built in a potentiometer for sensitivity control.
- Onboard signal output indication, output effective signal is high, at the same time the indicator light up, the output signal can directly connect to microcontroller IO.
- Detection angle about 60 degrees, the flame spectrum especially sensitive.
- The flame of the most sensitive sensors flame, the regular light is also a response, generally used for fire alarm purposes.
SKU: n/a -
Temperature & Humidity Sensor
DS18B20 Water Proof Temperature Probe – Black (1m) Original Chip
- A probe by new original installation import DS18B20 temperature sensor chip.
- Stainless steel tube encapsulation waterproof moistureproof prevents rust.
- Stainless steel shell (6 * 45 mm), lead length 100 mm (shielding wire) use stability;
- 3.0 V-5.5 V power supply;
- Temperature range wide: -55 ℃ ~ + 125 ℃;
- Without the external components, the unique single bus.
SKU: n/a -
Temperature & Humidity Sensor
DS18B20 Water Proof Temperature Probe – Black (1m)
- A probe by new original installation import DS18B20 temperature sensor chip.
- Chip each pin use heat shrinkable tube to prevent short circuit, internal sealing glue, waterproof, moistureproof.
- Stainless steel tube encapsulation waterproof moistureproof prevent rust.
- Stainless steel shell (6 * 45 mm), lead length 100 cm (shielding wire) use stability.
- Without the external components, the unique single bus;
SKU: n/a -
Temperature & Humidity Sensor
DHT11 Digital Relative Humidity and Temperature Sensor Module
- The module can detect the surrounding environment of the humidity and temperature
- High reliability and excellent long-term stability
- The output from the digital output
- Working voltage 3.3V-5V
- Humidity measurement range: 20%-95% (0-50 degrees range)
- Humidity measurement accuracy: ±5.0%RH
- Temperature measurement range: 0 degrees -50 degrees
- Temperature measurement accuracy: ±2.0degree.
SKU: n/a -
-
Temperature & Humidity Sensor
DHT22 Digital Temperature and Humidity Sensor Module AM2302
- Measuring range: temperature -40-80 ℃; humidity 0; 99.9%RH
- Measurement accuracy (25℃): temperature: + 0.5; humidity: + 2%RH (10; 90%RH)
- Resolution: temperature: 0.1 ℃, humidity: 0.1%RH
- Attenuation value: temperature: <1℃ / year; humidity: < 1%RH/ years
- High precision
- Capacitive type
- Full range temperature compensated
- Relative humidity and temperature measurement
- Calibrated digital signal
- Outstanding long-term stability
SKU: n/a -
Temperature & Humidity Sensor
DHT-11 Digital Temperature And Humidity Sensor
- Humidity measuring range: 20%~90%RH(0~50 degree (temperature compensation).
- Temperature measuring range: 0~+50degree.
- Humidity measurement accuracy: ±5.0%RH.
- Temperature measurement accuracy: ±2.0degree.
- Low power consumption.
- Relative humidity and temperature measurement
- All calibration, digital output
- Excellent long-term stability
SKU: n/a -
Measuring Instruments
XH W1209 12V Digital Temperature Controller Module W/ Display and NTC Temp Sensor
-33%
Measuring InstrumentsXH W1209 12V Digital Temperature Controller Module W/ Display and NTC Temp Sensor
- Temperature Control Range(°C): -50 to +110
- Resolution @-9.9°C to +99.9°C: 0.1°C
- Resolution @all temperatures: 1°C
- Accuracy: 0.1°C
- Refresh Rate(s): 0.5
- Supply Voltage(V): 12
- Measuring Inputs: NTC10K
- Cable Length: 0.5 Meter
- Output Type: 1 Channel Relay Output
- Capacity: 10A
SKU: n/a -
Measuring Instruments
XH-W3001 DC 12V 120W Digital Microcomputer Thermostat Switch
- Easy to install
- Output type: Direct Output
- Output capacity: MAX 10A temperature measurement, display; refrigeration, heating control
- Temperature setting upper and lower limits
- Simple operation, suitable for seafood machines.
- Temperature Measuring Range: -50~110°C
- Temperature Control Range: -50~110°C
- Control Accuracy: Upto 0.1℃
SKU: n/a -
Measuring Instruments
XH-W3001 AC 220V 1500W Digital Microcomputer Thermostat Switch
- Output type: AC Output (AC 220V 1500W).
- Temperature setting upper and lower limits.
- Simple operation, suitable for seafood machines.
- Temperature Measuring Range: -50~110°C.
- Temperature Control Range: -50~110°C.
- Control Accuracy: Upto 0.1℃.
SKU: n/a -
Measuring Instruments
XH-W1219 12V Digital Red+Green Display Temperature Controller Module W/ NTC Waterproof Temperature Sensor
-26%
Measuring InstrumentsXH-W1219 12V Digital Red+Green Display Temperature Controller Module W/ NTC Waterproof Temperature Sensor
- Control Range: -50~110 °C
- Control Precision: 0.1 °C
- Measuring Input: NTC10K waterproof sensor L=0.5m.
- High-Temperature Alarm: -49~110 °C
- Input Voltage: DC 12V
- Output Type: Relay output 10A (max)
- Return Difference Setting: 0.1~30 °C
- Delay Starting: 0-10min
- Temperature Calibration: -10~10 °C
SKU: n/a
