Temperature Sensor
Showing all 18 results
-
Temperature & Humidity Sensor
KSD9700 250V 5A 150° C Plastic Thermostatic Temperature Switch NC
1. The KSD9700 250V 5A 150°C Plastic Thermostatic Temperature Switch NC features a bimetal head as its temperature sensing element.
2. This type of thermostat is extensively utilized in home appliances, including motors and electrical equipment such as air conditioner motors, transformers, and thermal appliances.SKU: n/a -
Temperature & Humidity Sensor
Flame Sensor infrared Receiver Ignition source detection module
- Output Channel: 1
- Power Supply: 3.3/5V
- Built in a potentiometer for sensitivity control.
- Onboard signal output indication, output effective signal is high, at the same time the indicator light up, the output signal can directly connect to microcontroller IO.
- Detection angle about 60 degrees, the flame spectrum especially sensitive.
- The flame of the most sensitive sensors flame, the regular light is also a response, generally used for fire alarm purposes.
SKU: n/a -
Temperature & Humidity Sensor
DS18B20 Water Proof Temperature Probe – Black (1m) Original Chip
- A probe by new original installation import DS18B20 temperature sensor chip.
- Stainless steel tube encapsulation waterproof moistureproof prevents rust.
- Stainless steel shell (6 * 45 mm), lead length 100 mm (shielding wire) use stability;
- 3.0 V-5.5 V power supply;
- Temperature range wide: -55 ℃ ~ + 125 ℃;
- Without the external components, the unique single bus.
SKU: n/a -
Temperature & Humidity Sensor
DS18B20 Water Proof Temperature Probe – Black (1m)
- A probe by new original installation import DS18B20 temperature sensor chip.
- Chip each pin use heat shrinkable tube to prevent short circuit, internal sealing glue, waterproof, moistureproof.
- Stainless steel tube encapsulation waterproof moistureproof prevent rust.
- Stainless steel shell (6 * 45 mm), lead length 100 cm (shielding wire) use stability.
- Without the external components, the unique single bus;
SKU: n/a -
Temperature & Humidity Sensor
BK05 250V 5A 80°C Plastic Thermostatic Temperature Switch NC
- Rated Voltage: 250V
- Current: 5A
- Temperature: 80° C
- Cable Length: 73 mm
- Head Dimension: 20 x 8 x 4 (LxWxH) mm
- Mechanical making and breaking of electrical circuits.
- Easy to use, small and handy module.
- Acts as temperature operated circuit breaker.
SKU: n/a -
Temperature & Humidity Sensor
DHT11 Digital Relative Humidity and Temperature Sensor Module
- The module can detect the surrounding environment of the humidity and temperature
- High reliability and excellent long-term stability
- The output from the digital output
- Working voltage 3.3V-5V
- Humidity measurement range: 20%-95% (0-50 degrees range)
- Humidity measurement accuracy: ±5.0%RH
- Temperature measurement range: 0 degrees -50 degrees
- Temperature measurement accuracy: ±2.0degree.
SKU: n/a -
Temperature & Humidity Sensor
PT100-S Waterproof 1m 30mm Stainless Steel Probe Temperature Sensor
-30%
Temperature & Humidity SensorPT100-S Waterproof 1m 30mm Stainless Steel Probe Temperature Sensor
- Model number: FTARP05 series
- Mounting form Polish rod probe
- The Probe material: Stainless steel
- Probe diameter: 4mm
- Length of the probe: 30mm
- Cabel material Silver plated copper (not insulated), PTFE Silver plated copper (Waterproof, insulated)
- Accuracy ±(0.3°C+0.5%|t|)
- Thermal response time: <0.5s
SKU: n/a -
-
Temperature & Humidity Sensor
DHT22 Digital Temperature and Humidity Sensor Module AM2302
- Measuring range: temperature -40-80 ℃; humidity 0; 99.9%RH
- Measurement accuracy (25℃): temperature: + 0.5; humidity: + 2%RH (10; 90%RH)
- Resolution: temperature: 0.1 ℃, humidity: 0.1%RH
- Attenuation value: temperature: <1℃ / year; humidity: < 1%RH/ years
- High precision
- Capacitive type
- Full range temperature compensated
- Relative humidity and temperature measurement
- Calibrated digital signal
- Outstanding long-term stability
SKU: n/a -
Temperature & Humidity Sensor
DHT-11 Digital Temperature And Humidity Sensor
- Humidity measuring range: 20%~90%RH(0~50 degree (temperature compensation).
- Temperature measuring range: 0~+50degree.
- Humidity measurement accuracy: ±5.0%RH.
- Temperature measurement accuracy: ±2.0degree.
- Low power consumption.
- Relative humidity and temperature measurement
- All calibration, digital output
- Excellent long-term stability
SKU: n/a -
Measuring Instruments
LCD Electronic Fish Tank Water Detector Thermometer
- Temperature range: -50°C ~ +110°C
- Temperature display resolution: ±0.1
- temperature measurement accuracy: 1°C
- Cable Length: 1M
- Display Dimensions : 48 x 29 x 16 (LxWxH) mm.
- Easy to use, small and handy module.
- The module is powered by a pair of LR44 button batteries (battery included)
SKU: n/a -
Measuring Instruments
XH W1209 12V Digital Temperature Controller Module W/ Display and NTC Temp Sensor
-33%
Measuring InstrumentsXH W1209 12V Digital Temperature Controller Module W/ Display and NTC Temp Sensor
- Temperature Control Range(°C): -50 to +110
- Resolution @-9.9°C to +99.9°C: 0.1°C
- Resolution @all temperatures: 1°C
- Accuracy: 0.1°C
- Refresh Rate(s): 0.5
- Supply Voltage(V): 12
- Measuring Inputs: NTC10K
- Cable Length: 0.5 Meter
- Output Type: 1 Channel Relay Output
- Capacity: 10A
SKU: n/a -
-
Measuring Instruments
XH-W3001 DC 12V 120W Digital Microcomputer Thermostat Switch
- Easy to install
- Output type: Direct Output
- Output capacity: MAX 10A temperature measurement, display; refrigeration, heating control
- Temperature setting upper and lower limits
- Simple operation, suitable for seafood machines.
- Temperature Measuring Range: -50~110°C
- Temperature Control Range: -50~110°C
- Control Accuracy: Upto 0.1℃
SKU: n/a -
Measuring Instruments
XH-W3001 AC 220V 1500W Digital Microcomputer Thermostat Switch
- Output type: AC Output (AC 220V 1500W).
- Temperature setting upper and lower limits.
- Simple operation, suitable for seafood machines.
- Temperature Measuring Range: -50~110°C.
- Temperature Control Range: -50~110°C.
- Control Accuracy: Upto 0.1℃.
SKU: n/a -
Measuring Instruments
XH-W1219 12V Digital Red+Green Display Temperature Controller Module W/ NTC Waterproof Temperature Sensor
-26%
Measuring InstrumentsXH-W1219 12V Digital Red+Green Display Temperature Controller Module W/ NTC Waterproof Temperature Sensor
- Control Range: -50~110 °C
- Control Precision: 0.1 °C
- Measuring Input: NTC10K waterproof sensor L=0.5m.
- High-Temperature Alarm: -49~110 °C
- Input Voltage: DC 12V
- Output Type: Relay output 10A (max)
- Return Difference Setting: 0.1~30 °C
- Delay Starting: 0-10min
- Temperature Calibration: -10~10 °C
SKU: n/a -
3D Printer, 3D Printer Extruder Parts and Fans
High Temperature NTC 100K Thermistor with 1 Meter Cable
-29%
3D Printer, 3D Printer Extruder Parts and FansHigh Temperature NTC 100K Thermistor with 1 Meter Cable
- Temperature range of use: – 30 ℃ ~ + 350 ℃.
- Dissipation power factor: ≥5 mW / ℃ (static in the air).
- Sensor Diameter: 3 mm
- Cable Length: 1 meter
- Max power rating: 45 mW.
- Hot time constant : ≤7 s(in the air)
- Temperature coefficient of resistance : – 2 ~ 5% / ℃
SKU: n/a -
Sensors, Temperature & Humidity Sensor
MAX6675 Module + K Type Thermocouple Sensor Measure 1024°C Temperature
-13%
Sensors, Temperature & Humidity SensorMAX6675 Module + K Type Thermocouple Sensor Measure 1024°C Temperature
- Internal integrated cold junction compensation circuit;
- With a simple three serial SPI interface;
- Temperature signal can be converted into 12-bit digital
- Embedded thermocouple break detection circuitry.
- High impedance differential inputs.
- Operating Voltage(VDC): 3 to 5.5
- Temperature Range(°C): 0 to +1024
- Cold Junction Compensation Range(°C): -20 to +80
SKU: n/a
