Voltmeter
Showing all 17 results
-
Current and Voltage Sensor
Voltage Detection Sensor Module 25V
- You can also use the IICLCD1602 LCD to display voltage.
- By 3P connector, connect this module with the expansion of board Arduino
- Voltage input range: DC 0-25 V
- Voltage detection range: DC 0.02445 V to 25 V
- Voltage analog resolution : 0.00489 V
SKU: n/a -
-
-
Boost Converter
XL6009 DC-DC Step-Up Converter Performance Ultra LM2577 Booster Circuit Board
- The performance is much higher than LM2577.
- Non-isolated Boost converter.
- It has a non-synchronous rectifier.
- Low ultra wide input voltage 3 v ~ 32 v, the best is 5 ~ 32 v working voltage range;
- Low ultra wide output voltage 5 v ~ 35 v;
SKU: n/a -
Boost Converter
150W DC-DC Boost Converter 10-32V to 12-35V 6A Step-Up Adjustable Power Supply
- Input voltage :10-32V
- Output voltage: 12-35V (adjustable)
- Output Current: 10A (MAX)
- Input Current: 16A (MAX) (Please enhance heat dissipation if more than 10A)
- The non-isolated step-up power conversion module
- Onboard LED illuminates when the voltage is applied to the module
- Equips Multi-turn Potentiometer.
SKU: n/a -
Buck Converter
XL4015 5A Step Down Adjustable Power Supply with LED Voltmeter
- Better than 2596, easy to 4A 50W, up to 75W adding the heat sink.
- Over-temperature protection: Yes (shutdown output automatically after over temperature).
- Input voltage: 4V ~ 38V (not more than 38V).
- Output voltage: 1.25V ~ 36V (adjustable).
- Output current: 0A ~ 5A (recommended below 4.5A).
SKU: n/a -
Measuring Instruments, Modules and Displays
Peacefair PZEM-004T AC Multi-function Electric Energy Metering Power Monitor
-12%
Measuring Instruments, Modules and DisplaysPeacefair PZEM-004T AC Multi-function Electric Energy Metering Power Monitor
- Brand: Peacefair
- Model: PZEM-004T
- Operating Voltage: 80-260VAC
- Test Voltage: 80-260VAC
- Rated Current: 100A
- Rated power: 100A / 22000W
- Operating frequency: 45-65Hz
- Measurement accuracy: 1.0
SKU: n/a -
-
Measuring Instruments, Modules and Displays
USB Charger Doctor (Voltmeter Ammeter)
- Compact and easy to carry, no additional power supply, plug, and play
- It can easily measure the output voltage of the USB port and the device operating current or load voltage
- Detect any USB charger such as PC USB, home charger, car charger
- Operating Voltage: 3.5 to 7 V
- Maximum Current: 3 A
SKU: n/a -
-
-
-
Measuring Instruments, Modules and Displays
Original Mastech MAS830L Digital Multimeter – Multimeter with Probes
-9%
Measuring Instruments, Modules and DisplaysOriginal Mastech MAS830L Digital Multimeter – Multimeter with Probes
- Brand: Mastech
- DC Voltage utpo 600V (In 5 Ranges)
- AC Voltage utpo 600V (In 2 Ranges)
- DC Current up to 10A (In 5 Ranges)
- Resistance up to 2 M.OHMS (In 5 Ranges)
- Tests AC/DC Voltage, DC Current and Resistance
- Transistor Check, Diode and Continuity Test
- Display Back Light
- Data Hold
- Rubber hostler for good grip.
SKU: n/a -
Boost Converter, Modules and Displays
LM2577 3A DC-DC Step UP LED Voltmeter 3-34 to 4-35V Adjustable Boost Converter module
-18%
Boost Converter, Modules and DisplaysLM2577 3A DC-DC Step UP LED Voltmeter 3-34 to 4-35V Adjustable Boost Converter module
- Input voltage range : 3-34V DC
- Output voltage range : 4-35v DC adjustable
- Output current:3A
- Voltmeter range:0 to 40V,error +-0.1v
- Multiple output regulator.
- One button to switch input and output voltage display.
- Power-down memory function.
- Press the button for 3 seconds can turn OFF/ON the LED display.
SKU: n/a
