Waveshare
Showing 25–48 of 65 results
-
Raspberry Pi Hats
Waveshare SX1268 LoRa HAT for Raspberry Pi 433MHz Frequency Band
- SX1268 LoRa module
- 74HC125V: voltage level translator
- CP2102: USB TO UART converter
- Working bands: 410.125 ~ 493.125MHz
- Receive Sensitivity: 147dBm@0.3Kbps (On-air)
- Interface: UART
- Range: 5KM(Sunny day; open area; Antenna: AUX 5dBi, Height 2.5m; Air Speed: 2.4kbps)
SKU: n/a -
-
Raspberry Pi Hats
Waveshare SIM7600G-H 4G HAT For Raspberry Pi, LTE Cat-4 4G / 3G / 2G Support
- LTE Cat-4, 3G, 2G Frequency Bands.
- LTE Cat-4: Up To 50Mbps (Uplink) / Up To 150Mbps (Downlink).
- 3G (HSPA+): Up To 5.76Mbps (Uplink) / Up To 42Mbps (Downlink).
- MP2128DT, MP1482 power chip
- NAU8810 audio decoder
- TXS0108EPWR voltage translator
- Satellite Bands: GPS/Beidou/GLONASS.
- Supports echo cancellation, noise reduction.
SKU: n/a -
Official Raspberry Pi Accessories
Waveshare Aluminum Heatsink For Raspberry Pi 5, With Thermal Pads And Spring-Loaded Push Pins
-22%
Official Raspberry Pi AccessoriesWaveshare Aluminum Heatsink For Raspberry Pi 5, With Thermal Pads And Spring-Loaded Push Pins
- Model: Waveshare Aluminum Heatsink For Raspberry Pi 5, With Thermal Pads And Spring-Loaded Push Pins
- Efficient Heat Dissipation
- Aluminum ConstructionThermal Pads
- temperature management and performance optimization
SKU: n/a -
Light/color Sensor
Waveshare TSL25911 High Sensitivity Digital Ambient Light Sensor I2C Interface
-19%
Light/color SensorWaveshare TSL25911 High Sensitivity Digital Ambient Light Sensor I2C Interface
- Supply voltage: 3.3 V to 5 V
- System: TSL25911FN
- Communication interface: I2C
- Interface address: fixed 0x29
- Measurement range: from 0 lx to 88000 lx
- Sensitivity: up to 188 ulx
- Dynamics: 600M:1
- The device is compatible with: Arduino, Raspberry Pi, STM32
SKU: n/a -
-
-
-
IoT & Wireless, IoT Development Boards
Waveshare ESP32-S3 Microcontroller, 2.4 GHz Wi-Fi Development Board, dual-core processor with frequency up to 240 MHz
-10%
IoT & Wireless, IoT Development BoardsWaveshare ESP32-S3 Microcontroller, 2.4 GHz Wi-Fi Development Board, dual-core processor with frequency up to 240 MHz
- Adopts ESP32-S3R2 as the main chip.
- Comes with Xtensa 32-bit LX7 dual-core processor, capable of running at 240 MHz.
- Integrated 512KB SRAM, 384KB ROM, 2MB PSRAM, 16MB Flash memory.
- Type-C connector, easier to use.
SKU: n/a -
-
-
RASPBERRY PI, Raspberry Pi Hats
Waveshare 1.3inch LCD Display Module for Raspberry Pi Pico, 65K Colors, 240×240, SPI
-11%
RASPBERRY PI, Raspberry Pi HatsWaveshare 1.3inch LCD Display Module for Raspberry Pi Pico, 65K Colors, 240×240, SPI
- 240×240 resolution, IPS screen, 65K RGB colors, clear and colorful displaying effect
- SPI interface requires minimal IO pins
- 1x joystick and 4x user buttons for easy interacting
- Operating Voltage: 2.6 ~ 5.5V
- Resolution: 240×240 pixels
- Communication Interface: 4-wire SPI
- Display Size: 23.40 × 23.40mm
SKU: n/a -
RASPBERRY PI, Raspberry Pi Hats
Waveshare CAN bus Module (B) for Raspberry Pi Pico, enabling long range communication through SPI
-15%
RASPBERRY PI, Raspberry Pi HatsWaveshare CAN bus Module (B) for Raspberry Pi Pico, enabling long range communication through SPI
- Product Waveshare CAN bus Module (B) for Raspberry Pi Pico, enabling long-range communication through SPI
- Operating Voltage 3.3V~5V
- CAN Controller MCP2515
- CAN Transceiver SIT65HVD230DR
- Communication BUS SPI
SKU: n/a -
-
-
Display Modules, e-Ink Paper Display
Waveshare 1.54 inch e-Ink Paper Display Module with SPI Interface
-15%
Display Modules, e-Ink Paper DisplayWaveshare 1.54 inch e-Ink Paper Display Module with SPI Interface
- Display Resolution: 200 x 200
- Display Screen Color: Black and White
- No backlight so keeps displaying last content for a long time even when the power is down
- Ultra low power consumption, basically power is only required for refreshing
- SPI interface, for connecting with controller boards like Raspberry Pi/Arduino/Nucleo, etc.
SKU: n/a
