Wifi
Showing all 19 resultsSorted by popularity
-
ESP WIFI Modules
ESP-12F ESP8266 Wifi Wireless IoT Board Module
- Communication interface voltage: 3.3V
- Working current: 240mA(MAX)
- Serial port baud rate: 115200 (default), can be modified to other values by AT command
- Serial communication format: 8N1
- Wireless Network Mode: station / softAP / SoftAP + station
- Wireless criteria: 802.11 b / g / n
- WIFI @ 2.4 GHz, support for WPA / WPA2 security mode
- +19.5dBm output power
SKU: n/a -
IoT & Wireless, IR and RF Transmitters and Receivers
2.4GHz NRF24L01+PA+LNA SMA Wireless Transceiver Antenna
-9%
IoT & Wireless, IR and RF Transmitters and Receivers2.4GHz NRF24L01+PA+LNA SMA Wireless Transceiver Antenna
- Voltage: 3-3.6V (recommended 3.3V) V.
- Maximum output power: +20dBm.
- Power-down mode current: 4.2uA.
- Operating Range: 1Km
- Antenna Gain (peak): 2Dbi.
- 2MB rate (Open area): 520m.
- 1MB rate (Open area): 750m.
- 250Kb rate (Open area): 1100m.
- It uses 2.4GHz global open ISM band, with license free.
- SPI interface facilitates the communication with MCU I/O port.
SKU: n/a -
ESP WIFI Modules
Olimex ESP8266 EVB-BAT
- Includes MOD-WIFI-ESP8266-DEV
- Relay 10A/250VAC (15A/120VAC 15A/24VDC) with connector and status LED
- Big button for easier access to UART mode
- LiPo battery connector with built-in LiPo charger and status LEDs
- Step up converter
- Power jack for +5V external power supply
- UEXT connector
- 20-pin connector CON1 with ESP8266’s signals
- PCB dimensions: (2.0 x 2.2)” ~ (51 x 57)mm
SKU: n/a -
ESP WIFI Modules
Espressif ESP32-WROOM-32D 16M 128Mbit Flash WiFi Bluetooth Module
- Xtensa 32-bit LX6 microprocessors
- 1 Kbit of EFUSE, 256 bits MAC
- WiFi: 802.11 b/g/n/d/e/i/k/r (802.11n up to 150 Mbps)
- Bluetooth v4.2 BR/EDR and BLE specification
- Wi-Fi mode Station/softAP/SoftAP+station/P2P
- Operating voltate: 2.2-3.6V
- Current Consumption: 80 mA
SKU: n/a -
ESP WIFI Modules
ESP8266 NodeMCU CP2102 Board
- Open-source, Interactive, Programmable, Low cost, Simple, Smart, WI-FI enabled
- Arduino-like hardware IO
- Integrated TR switch, balun, LNA, power amplifier and matching network
- Integrated PLL, regulators, DCXO and power management units
- Onboard USB to serial chip to easily program and upload codes from the Arduino IDE
- Embeds logic level converter circuits
- Has onboard 3.3V regulator to ensure enough power to function as your go-to WiFi chip!
- Easy access to the GPIO pins for easy prototyping
- ESP-12E Processor
- Easy to use breadboard friendly form factor
SKU: n/a -
ESP WIFI Modules
ESP8266/ ESP-12F Module/ Serial WIFI Witty Cloud Development Board + MINI nodeMCU
-21%
ESP WIFI ModulesESP8266/ ESP-12F Module/ Serial WIFI Witty Cloud Development Board + MINI nodeMCU
- LDR Light Sensor on board
- WS2812 Led on board
- Includes CH340G USB-to-UART programmer
- Includes LDR (light dependent resistor a.k.a photoresistor) connected to ESP’s ADC pin
- Supports 3 modes: AP,STA,AP+STA
- Dimensions: 24mm x 16mm
- Micro USB connection for power and/or programming
SKU: n/a -
ESP WIFI Modules
WeMos ESP8266 D1 R2 V2.1.0 WiFi Development Board
- Microcontroller: ESP8266EX
- Operating Voltage: 3.3V
- Digital I/O Pins: 11 (all I/O pins have interrupt/PWM/I2C/one-wire capability, except for D0)
- Analog Input Pins: 1
- Flash Memory: 4MB
- On-Board Switching Power Supply:
- Input Voltage Range: 9V to 12V
- Output: 5V at 1A Max
SKU: n/a -
ESP WIFI Modules
ESP-12E: ESP8266 Serial Port WIFI Wireless Transceiver Module For Arduino
- WS2812 Led on board.
- 802.11 b/g/n
- Wi-Fi Direct (P2P), soft-AP
- Integrated TCP/IP protocol stack
- Integrated TR switch, balun, LNA, power amplifier and matching network
- Integrated PLL, regulators, DCXO and power management units
SKU: n/a -
ESP WIFI Modules
NodeMCU ESP8266 Serial Port Baseboard Lua WIFI Development Board
- The perfect solution for breaking out the pins from Lua V3 Nodemcu.
- Lead-out all the IO ports of the ESP-12E development board
- Lead out the pins of 5V and 3.3V power supply
- Convenient to connect with peripheral modules
- Onboard 5V / 1A DC-DC step-down converter circuit
- Onboard power indicator
- With DC power jack 6-24V.
SKU: n/a -
Relay Modules
ESP8266 10A DC 7-30V Network Relay WIFI Module
- With ESP8266 Wifi module,4-layers board design.
- Input overvoltage protection, input with TVS, when the voltage exceeds 33V,
- automatic protection will operate.
- Input overcurrent protection.
- 220V 10A relay, one normally open, one normally closed.
- One way optocoupler isolation input, TVS input protection.
SKU: n/a -
Relay Modules
ESP8266 WiFi 5V 1 Channel Relay Module
- Onboard Module: ESP8266 wifi module; in AP mode it can connect with 5 Clients at the same time
- Operating Way: cellphone carried on wifi module; cellphone and wifi module carried on the same router, and use the APP to control relay
- Transmission Distance : 400m (max)
- Relay : 5V,10A/250V AC 10A/30V DC
- Baud Rate: 9600.
- Diode effusion protection;
- Short response time
SKU: n/a -
IoT & Wireless, IoT WIFI Smart Switches
Sonoff Basic WI-FI Intelligent Timer Switch 10A 220W Digital Wireless Control Module
-7%
IoT & Wireless, IoT WIFI Smart SwitchesSonoff Basic WI-FI Intelligent Timer Switch 10A 220W Digital Wireless Control Module
- Support 433MHz RF remote.
- Support remotely turn on or off added devices.
- Support Max 8 timers tasks for each added device.
- Works with AMAZON ALEXA
- Works with GOOGLE ASSISTANT
- Also, Work with NEST
- Support numerous WiFi smart switches one smartphone.
SKU: n/a -
Development Boards
Mega +WiFi R3 Atmega2560+NodeMCU ESP8266 32Mb Memory USB-TTL CH340G Compatible For Arduino Mega
-11%
Development BoardsMega +WiFi R3 Atmega2560+NodeMCU ESP8266 32Mb Memory USB-TTL CH340G Compatible For Arduino Mega
- It is a customized version of the classic ARDUINO MEGA R3 board.
- Full integration of Atmel ATmega2560 microcontroller and ESP8266 Wi-Fi IC, with 32 Mb (megabits) of flash memory, and CH340G USB-TTL converter on a single board!
- All components can be set up to work together or independently.
SKU: n/a -
RASPBERRY PI, Raspberry Pi Compatible Accessories
RTL8188 Mini USB wireless Network Card 300Mbps Wifi Dongle
-19%
RASPBERRY PI, Raspberry Pi Compatible AccessoriesRTL8188 Mini USB wireless Network Card 300Mbps Wifi Dongle
- Mini portable USB 2.0 design.
- Wireless N speed up to 300Mbps, ideal for internet surfing and online gaming.
- Complies with IEEE 802.11n (Draft 2.0), IEEE 802.11g, IEEE 802.11b standards.
- MIMO technology makes wireless transmission rates up to 600Mbps wifi antenna.
- 600Mbps Wireless Wifi USB Dongle/Wireless USB Adapter/Wireless Network Card
SKU: n/a -
IoT & Wireless, LORA Module
Ai Thinker LoRa Series Ra-02 Spread Spectrum Wireless Module
- Manufacturer: Ai-Thinker
- LoRa Spread Spectrum modulation technology
- Constant RF power output at + 20dBm-100mW voltage change
- High sensitivity: down to -148dBm
- Half-duplex SPI communication
- Programmable bit rates up to 300kbps
- Supports FSK, GFSK, MSK, GMSK, LoRa and OOK modulation modes
SKU: n/a -
5.8G 3dBi 4 Leaf Clover RHCP RP-SMA Antenna with Cover for FPV Multicopter
Raspberry Pi Zero W (Wireless) With In-Built Wifi and Bluetooth
Creality CR-PETG 3D Printing Filament 1.75mm (1kg – Black)
SimonK 30A BLDC ESC Electronic Speed Controller with Connectors
Nano R3 W/O USB Cable Compatible with Arduino (Un Soldered)
Official Raspberry Pi 6 mm Wide Angle Lens for Pi High Quality Camera
RunCam Eagle 2 Pro 800 TVL FPV Camera
Hanyoung Nux M902 Roller Plunger Limit Switch
Fatshark ImmersionRC SpiroNet 5.8GHz SMA Antenna
Mini TS5828 FPV Set 5.8G 32CH 600mW AV RC Transmitter
100A Multirotor ESC Power Distribution Battery Board For Quadcopter 













