-16%
Development Boards, Programmer
Altera MAX II EPM240 CPLD Development Board
- Onboard the EPM240T100C5N chip.
- EPROM chip configuration using EPCS4, the size of 8Kbit.
- Onboard 50M active patch crystal (Crystal Slaughter halfback).
- Power supply with a largemouth outlet, single 5V power supply.
- Board has a power indicator and reset switch.
- More IO ports and clock pins through the pin leads through these interfaces can be extended to any memory and peripherals.
₹1,050.00 ₹1,250.00
The Altera MAX II EPM240 CPLD Development Board is from ALTERA MAX II family CPLD chip EPM240T100C5N minimum system board, with a byte-blaster and usb-blaster download for product validation and development.
JTAG and power supply interface board set aside and led all pins, just connect the 5V power supply, it can work, extremely convenient to use.
CPLD chip is very suitable for the input of low-cost CPLD / FPGA, the user leads the expansion of external circuits according to the IO port of the core plate: LED lights, digital tube, LCD liquid crystal, serial communication, etc.
Specifications:
| FPGA Chip | EPM240T100C5N |
| Input Voltage (V) | 5 |
| Input / Output Pins | 100 |
| EEPROM chip | 8Kbit EPCS4 |
| Oscillator Frequency (MHz) | 50 |
| FPGA IO voltage (V) | 3.3 |
| Length (mm) | 72 |
| Width (mm) | 52 |
| Height (mm) | 13 |
| Weight (gm) | 21 |
Package Includes:
- 1 x Altera MAX II EPM240 CPLD Development Board
Based on 0 reviews
Be the first to review “Altera MAX II EPM240 CPLD Development Board”
Related products
-
Development Boards
RP2040 Microcontroller IC by Raspberry PI REEL of 500
- Dual ARM Cortex-M0+ @ 133MHz
- 264kB on-chip SRAM in six independent banks
- Support for up to 16MB of off-chip Flash memory via dedicated QSPI bus
- DMA controller
- Fully-connected AHB crossbar
- Interpolator and integer divider peripherals
- On-chip programmable LDO to generate the core voltage
- 2 on-chip PLLs to generate USB and core clocks
- 30 GPIO pins, 4 of which can be used as analog inputs
SKU: n/a -
Development Boards
Official Raspberry Pi Camera V2
- Fixed focus lens on-board
- Improved resolution – 8-Megapixel native resolution sensor-capable of 3280 x 2464 pixel static images
- Supports 1080p30, 720p60 and 640x480p90 video
- Size 25mm x 23mm x 9mm
- Weight just over 3g
- Connects to the Raspberry Pi board via a short ribbon cable (supplied)
- Camera v2 is supported in the latest version of Raspbian, Raspberry Pi’s preferred operating system
- Uses the Sony IMX219PQ image sensor – high-speed video imaging and high sensitivity
SKU: n/a -
-
There are no reviews yet.