Arduino MKR Therm Shield ASX00012
- Arduino MKR Therm Shield
- Input Voltage: 3.3V
- Length: 61 mm
₹6,052.00 ₹7,052.00
The MKR THERM Shield allows a board of the MKR family to acquire temperatures from a thermocouple of type K and a DS18Bxx digital one-wire sensor. The Thermocouple is a kind of temperature sensor that offers high accuracy and a wide range of measured temperatures. Its analog nature requires specific interfacing, and this shield relies on the MAX31855 thermocouple digital interface.
The two connectors of the MKR THERM Shield allow the usage of Type K thermocouples with or without a plug attached to the metal wires.
The MKR THERM Shield has its own library to read the temperature measured by the thermocouple. You may find further details and a usage example in our Getting Started page.
Compatible with:
- MKR Zero
- MKR 1000 WiFi
- MKR WiFi 1010
- MKR FOX 1200
- MKR WAN 1300
- MKR WAN 1310
- MKR GSM 1400
- MKR NB 1500
- MKR Vidor 4000
Features:
- CONNECTORS:
- K TYPE
- DALLAS DS18S20 (to solder)
- Screw terminal block
- INPUT VOLTAGE 3.3V
- OPERATING VOLTAGE 3.3V
- OPERATING TEMPERATURE -200°C + 700°C
- COMMUNICATION SPI/1Wire
- IC MAX31855
- LENGTH 61 mm
- WIDTH 25 mm
- WEIGHT 32 gr.
Package Includes:
1 x Arduino MKR Therm Shield ASX00012
Based on 0 reviews
Only logged in customers who have purchased this product may leave a review.
Related products
-
Development Boards, Boards Compatible with Arduino
UNO R3 CH340G ATMega328P compatible with arduino + Cable + Transparent Acrylic Case For Uno R3
-15%
Development Boards, Boards Compatible with ArduinoUNO R3 CH340G ATMega328P compatible with arduino + Cable + Transparent Acrylic Case For Uno R3
- A basic Arduino Kit including everything to get started.
- It includes a quality proven Arduino Cable.
- It includes a strong and sturdy Transparent Acrylic Case.
- Microcontroller ATmega328 (SMD) – Interface CH340G
- Operating Voltage: 5V
- Input Voltage (recommended): 7-12V
- Digital I / O Pins 14 (of which 6 provide PWM output)
- Analog Input Pins: 6
SKU: n/a -
Arduino Boards and Accessories
ESPLORA Joystick Photosensitive Sensor Board, Support LCD Compatible with Arduino
-10%
Arduino Boards and AccessoriesESPLORA Joystick Photosensitive Sensor Board, Support LCD Compatible with Arduino
The design of the Esplora board recalls traditional gamepad design with the analog joystick on the left and four push buttons on the right. The Esplora has the following onboard inputs and outputs :
- Analogue joystick with central push-button two axis (X and Y) and a centre pushbutton.
- 4 push-buttons laid out in a diamond pattern.
- Linear potentiometer slider near the bottom of the board.
- Microphone for getting the loudness (amplitude) of the surrounding environment.
- Light sensor for getting the ambient brightness.
- Temperature sensor reads the ambient temperature (please note that the temperature sensor is not fitted, however we do stock this component).
- Three-axis accelerometer measures the board’s relation to gravity on three axes (X, Y, and Z)
- Buzzer can produce square-waves.
- RGB led bright LED with Red Green and Blue elements for colour mixing.
- 2 TinkerKit Inputs to connect the TinkerKit sensor modules with the 3-pin connectors.
- 2 TinkerKit Outputs to connect the TinkerKit actuator modules with the 3-pin connectors.
- TFT display connector connector for an optional color LCD screen, SD card, or other devices that use the SPI protocol.
- In order to utilise the total number of available sensors, the board uses an analogue multiplexer. This means a single analog input of the microcontroller is shared among all the input channels (except the 3-axis accelerometer). Four additional microcontroller pins choose which channel to read.
SKU: n/a -
Official Arduino Boards
Nano Board R3 with CH340 Chip without USB Cable Compatible with Arduino (Unsoldered)
-6%
Official Arduino BoardsNano Board R3 with CH340 Chip without USB Cable Compatible with Arduino (Unsoldered)
- Operating Voltage (logic level): 5V
- 8 analog inputs ports: A0 ~ A7
- 14 Digital input / output ports: TX, RX, D2 ~ D13
- 1 pair of TTL level serial transceiver ports RX / TX
- Using Atmel Atmega328P-AU MCU
- Standard 0.1” spacing DIP (breadboard friendly).
SKU: n/a -
Development Boards, Arduino Boards and Accessories
Arduino Nano Board R3 with CH340 chip (soldered pin)
-22%
Development Boards, Arduino Boards and AccessoriesArduino Nano Board R3 with CH340 chip (soldered pin)
- The Arduino Nano Board R3 with CH340 is another popular Arduino development board very much similar to the Arduino UNO They use the same Processor (Atmega328p) and hence they both can share the same program.
SKU: n/a
There are no reviews yet.