Arduino MKR Zero ABX00012
- Microcontroller: SAMD21 Cortex-M0+ 32bit low power ARM MCU
- Board Power Supply (USB/VIN): 5V
- Supported Battery(*): Li-Po single cell, 3.7V, 700mAh minimum
- DC Current for 3.3V Pin: 600mA
- Comes with a micro SD card holder
₹2,999.00 ₹3,299.00
The MKR ZERO board acts as a great educational tool for learning about 32-bit application development. It has an onboard SD connector with dedicated SPI interfaces (SPI1) that allows you to play with MUSIC files with no extra hardware! The board is powered by Atmel’s SAMD21 MCU, which features a 32-bit ARM Cortex® M0+ core.
The board contains everything needed to support the microcontroller; simply connect it to a computer with a micro-USB cable or power it with a LiPo battery. The battery voltage can also be monitored since a connection between the battery and the analog converter of the board exists.
Note: Unlike most Arduino & Genuino boards, the MKRZero runs at 3.3V. The maximum voltage that the I/O pins can tolerate is 3.3V. Applying voltages higher than 3.3V to any I/O pin could damage the board.
Specification:
| Input Voltage(Recommended) | 5 V |
|---|---|
| Analog I/O Pins | Input Pins:7, Output Pins:1 |
| Digital I/O Pins | 22 |
| PWM Digital I/O Pins | 12 |
| Clock Speed | 48MHz |
| Flash Memory | 256 KB |
| SRAM | 32 KB |
| DC Current for 3.3V Pin (mA) | 600 |
| Dimensions in mm (LxWxH) | 61.5x25x4 |
| Shipping Weight | 0.021 kg |
| Shipping Dimensions | 9 × 6 × 2.5 cm |
Features:
- Using the popular Arm® Cortex®-M0 32-bit SAMD21 processor
- Comes with a micro SD card holder
Package includes:
1 x Arduino MKR Zero ABX00012
Based on 0 reviews
Only logged in customers who have purchased this product may leave a review.
Related products
-
Official Arduino Boards, Original Arduino Boards
Original Arduino Nano A000005
- Manufacturer: Arduino Officials
- Operating Voltage (logic level): 5V
- 8 analog inputs ports: A0 ~ A7
- 14 Digital input / output ports: TX, RX, D2 ~ D13
- 1 pair of TTL level serial transceiver ports RX / TX
- Using Atmel Atmega328P-AU MCU
- There is a bootloader installed in it
- Standard 0.1” spacing DIP (breadboard friendly).
- Manual reset switch.
SKU: n/a -
Official Arduino Boards, Original Arduino Boards
Original Arduino UNO WiFi REV2 ABX00021
- Microcontroller: ATMEGA4809
- Operating Voltage: 5V
- Input Voltage (recommended): 7-12V
- Digital I/O Pins: 14 (6 Provide PWM Output)
- PWM Digital I/O Pins: 6
- Analog Input Pins: 6
- DC Current per I/O Pin: 20mA
- DC Current for 3.3V Pin: 50mA
- Flash Memory: 48KB (ATMEGA4809)
- SRAM: 6,144KB (ATMEGA4809)
- EEPROM: 256 Bytes (ATMEGA4809)
- Clock Speed: 16MHz
SKU: n/a -
Official Arduino Boards, Original Arduino Boards
Original ARDUINO NANO 33 BLE Board (Without Header) ABX00030
-14%
Official Arduino Boards, Original Arduino BoardsOriginal ARDUINO NANO 33 BLE Board (Without Header) ABX00030
- Microcontroller: nRF52840 (datasheet)
- Radio module: u-blox NINA-W102
- Secure Element : ATECC608A
- Operating Voltage: 3.3V
- Input Voltage (limit) : 21V
- DC Current per I/O Pin: 7 mA
- Clock Speed: 48MHz
SKU: n/a -
There are no reviews yet.