Arduino Proto Shield Rev3 (Uno Size) TSX00083
- 14 pins SMD footprint (50 mils pitch)
- 32 double row through Hole pads, standard Arduino breakout layout
- Proto aerea with multiple THT pads, 100 mils pitch
- Large 0.1inch prototyping area
- 14pin SMD footprint (50mils pitch)
- 20pin through hole footprint (100mils pitch)
- Long and easy to solder ground/5V rails
₹1,549.00 ₹2,149.00
Presenting Arduino Proto Shield Rev3 (Uno Size) from Arduino. The Arduino Prototyping Shield makes it easy for you to design custom circuits. You can solder parts to the prototyping area to create your project, or use it with a small solderless breadboard (not included) to quickly test circuit ideas without having to solder. It’s got extra connections for all of the Arduino I/O pins, and it’s got space to mount through-hole and surface mount integrated circuits. It’s a convenient way to make your custom Arduino circuit into a single module.
- Power: The Proto Shield bring the power from the Arduino standard 5V and GND pins to the two power bus rows placed between the Through Hole package footprint, which can be used for powering the DIP sockets, or for power and ground rows.
- Physical Characteristics: The maximum length and width of the Proto Shield PCB are 2.7 and 2.1 inches respectively. Three screw holes allow the shield to be attached to a surface or case. Note that the distance between digital pins 7 and 8 is 160 mil (0.16″), not an even multiple of the 100 mil spacing of the other pins.
- SPI Connection: On the ICSP connector only 5V, GND and RST are wired to the respective pins on the header. MOSI and MISO are present only on the connector pads.
Package Includes:
1 x Arduino Proto Shield Rev3 (Uno Size) TSX00083
Based on 0 reviews
Only logged in customers who have purchased this product may leave a review.
Related products
-
Development Boards, Arduino Boards and Accessories
Arduino Nano Board R3 with CH340 chip (Unsoldered)
-44%
Development Boards, Arduino Boards and AccessoriesArduino Nano Board R3 with CH340 chip (Unsoldered)
The Arduino Nano Board R3 with CH340 is another popular Arduino development board very much similar to the Arduino UNO They use the same Processor (Atmega328p) and hence they both can share the same program.
SKU: n/a -
-
Arduino Boards and Accessories
ESPLORA Joystick Photosensitive Sensor Board, Support LCD Compatible with Arduino
-10%
Arduino Boards and AccessoriesESPLORA Joystick Photosensitive Sensor Board, Support LCD Compatible with Arduino
The design of the Esplora board recalls traditional gamepad design with the analog joystick on the left and four push buttons on the right. The Esplora has the following onboard inputs and outputs :
- Analogue joystick with central push-button two axis (X and Y) and a centre pushbutton.
- 4 push-buttons laid out in a diamond pattern.
- Linear potentiometer slider near the bottom of the board.
- Microphone for getting the loudness (amplitude) of the surrounding environment.
- Light sensor for getting the ambient brightness.
- Temperature sensor reads the ambient temperature (please note that the temperature sensor is not fitted, however we do stock this component).
- Three-axis accelerometer measures the board’s relation to gravity on three axes (X, Y, and Z)
- Buzzer can produce square-waves.
- RGB led bright LED with Red Green and Blue elements for colour mixing.
- 2 TinkerKit Inputs to connect the TinkerKit sensor modules with the 3-pin connectors.
- 2 TinkerKit Outputs to connect the TinkerKit actuator modules with the 3-pin connectors.
- TFT display connector connector for an optional color LCD screen, SD card, or other devices that use the SPI protocol.
- In order to utilise the total number of available sensors, the board uses an analogue multiplexer. This means a single analog input of the microcontroller is shared among all the input channels (except the 3-axis accelerometer). Four additional microcontroller pins choose which channel to read.
SKU: n/a -
There are no reviews yet.