Cytron Dual channel 10A Motor Driver UNO Robot Controller

The Cytron Dual Channel 10A Motor Driver UNO Robot Controller is an Arduino UNO-compatible board featuring a built-in dual-channel 10A motor driver.

Utilizing the same Atmega328P microcontroller found on the official Arduino UNO, this board is loaded with the latest optiboot. Program development can be done using the Arduino IDE by selecting Arduino/Genuino UNO as the target platform.

Noteworthy features of the Cytron 2 Channel 10A UNO Robot Controller include support for both locked-antiphase and sign-magnitude PWM signals. It distinguishes itself by employing full solid-state components, enhancing response time and eliminating the wear and tear associated with mechanical relays. This design choice also streamlines the wiring process.

The board is equipped with various enhancements tailored for convenience and efficiency. The incorporation of most components for typical applications minimizes the need for additional peripherals. With a straightforward interface, the board is designed for Plug and Play functionality. Simply provide power, perform simple coding, and the board is ready to drive brushed motors.

Overall, the Cytron Dual Channel 10A Motor Driver UNO Robot Controller offers compatibility with Arduino UNO, a robust motor-driving capability, and streamlined features for ease of use and efficient motor control in robotic applications.

Features:

1. Onboard 1A (maximum) 5V voltage regulator.
2. Onboard 500mA (maximum) 3.3V voltage regulator.
3. 0-5V digital outputs with 3.3V compatible inputs.
4. 14 Digital I/O Pins (6 PWM outputs).(4 pin used for Motor driver)
5. 6 Analog Inputs (Can be digital I/O too).
6. Maximum current up to 10A continuous.
7. ISP 6-pin Header.
8. 32k Flash Memory.
9. 16MHz Clock Speed.
10. R3 Shield Compatible.
11. TX, RX, Power, pin 13 LEDs are moved to edge.
12. LED indicator for I/0 pin
13. I/O extension
14. 2x HC-SR04 connector
15. Utilize USB Micro-B socket.
16. On board push buttons for fast test and manual operation.
17. No polarity protection
18. Dimension: 100 x 76 x 13 (LxWxH) mm
19. Weight: 52 gm.
20. Support up to 30A  peak(10 seconds) and 10A(continuous) per channel.
21. Bi-directional control for two brushed DC motor
22. Current limiting at 30A.
23. Solid state components provide faster response time and eliminate the wear and tear of a mechanical relay.
24. Fully NMOS H-Bridge for better efficiency and no heat sink is required.
25. Speed control PWM frequency up to 20KHz (Actual output frequency is the same as input frequency).
26. Support both locked-antiphase and sign-magnitude PWM operation.
27. Arduino sketch compatible.
28. Able to drive brushed motor from 6V to 24V.
29. Single power input for both motor and the onboard controller.
30. SMD ATmega328 microcontroller with Optiboot (UNO) Bootloader.

Package Includes:

1 x Cytron Dual channel 10A Motor Driver UNO Robot Controller.