DFRobot FireBeetle ESP32-E IoT Microcontroller with Header (Supports Wi-Fi & Bluetooth)
- Operating Voltage: 3.3V.
- Input Voltage: 3.3V~5.5V.
- Support Low-Power: 2mA.
- Support USB Charging.
- GDI Display Port, easy to connect.
₹1,149.00 ₹1,249.00
The dual-core chip Fire Beetle ESP32-E main controller board is based on the ESP-WROOM-32E and was created specifically for the Internet of Things. The DFR0654-F is a versatile device that can be used for wearables, industrial IoT applications, smart home IoT, and more. It boasts an inbuilt charging circuit, ultra-low power consumption, tiny size, and an easy-to-use interface. When you link it to an IoT platform like IFTTT, you can quickly develop your own IoT smart home system. Programming with Arduino is supported on the Fire Beetle ESP32-E, and Micro Python and Scratch graphical programming will be supported shortly.
We provide you with detailed online tutorials and application cases, and there are thousands of sensors with welding-free Gravity interfaces and actuators to help you get started easily. Besides, the stamp hole design makes it able to be easily embedded in your PCB, greatly saving your costs and time to build and test a prototype. We sell two versions of Fire beetle ESP32-E, unsoldered version and with header version. If you want to plug the fire beetle shield into your fire beetle main-board, the Fire beetle Board ESP32-E(Pre-soldered) is better for you.
Specification:
| Input Voltage (V) | 3.3V~5.5V. |
|---|---|
| Support Low-Power | 2mA |
| Max Discharge Current | 600mA@3.3V LDO |
| Max Charge Current | 500mA |
| Main Frequency | 240MHz |
| SRAM | 520KB |
| Flash | 4MB |
| Frequency Range | 2.4~2.5 GHz |
| Operating Current (A) | 80mA（Average） |
| Operating Temperature Range (°C): | -40℃~+85℃ |
| Module Size | 25.4×60mm/1×2.36 |
| Shipping Weight | 0.26 kg |
| Shipping Dimensions | 8 × 6 × 2 cm |
Features:
- ESP32 Dual-core low power microcontroller, 10uA power consumption.
- Wi-Fi + Bluetooth 4.0 Dual-mode Module.
- Support USB Charging
- GDI Display Port, easy to connect.
- Onboard Charging Circuit and PH2.0 lithium Battery Interface.
Packages Includes:
1 x DF Robot Fire Beetle ESP32-E IoT Microcontroller with Header (Supports Wi-Fi & Bluetooth).
Based on 0 reviews
Be the first to review “DFRobot FireBeetle ESP32-E IoT Microcontroller with Header (Supports Wi-Fi & Bluetooth)”
Related products
-
IoT & Wireless, xBee Zigbee modules
Zigbee XBee Pro S2C 802.15.4 Module 63mW 3Km+ 3.2dBi Antenna
- Supports binding and multicasting for home automation
- Mesh-network topology
- 2.4 GHz for worldwide deployment
- Common XBee footprint fits Parallax XBee Adapters and the Propeller Activity Board
- Firmware upgrades via UART, SPI or over the air
- TRANSCEIVER CHIPSET: SiliconLabs EM357 SoC
- DATA RATE: 250kbps Max
- RATED OUTDOOR/RF LINE-OF-SIGHT RANGE: Up to 2 mile (3200m)
SKU: n/a -
-
IoT & Wireless, LORA Module
ESP32 LoRa SX1278 0.96 Inch Blue OLED Display BT WiFi Module for Arduino
-9%
IoT & Wireless, LORA ModuleESP32 LoRa SX1278 0.96 Inch Blue OLED Display BT WiFi Module for Arduino
- Supports Sniffer, Station, softAP and Wi-Fi Direct modes
- Data rate: 150 Mbps @ 11n HT40,72 Mbps @ 11n HT20,54 Mbps @ 11g, 11 Mbps @ 11b
- Transmit power: 19.5 dBm @ 11b, 16.5 dBm @ 11g, 15.5 dBm @ 11n
- Receiver sensitivity up to – 98 dBm
- UDP continues to throughput by 135 Mbps
SKU: n/a -
IoT & Wireless, IoT Development Boards
DFRobot FireBeetle 2 Board ESP32-S3 (N16R8) AIoT Microcontroller with Camera (Wi-Fi & Bluetooth on Board)
-5%
IoT & Wireless, IoT Development BoardsDFRobot FireBeetle 2 Board ESP32-S3 (N16R8) AIoT Microcontroller with Camera (Wi-Fi & Bluetooth on Board)
- Operating Voltage: 3.3V
- Max Charging Current: 1A
- Operating Temperature: -20 to 70℃
- Processor: Xtensa® dual-core 32-bit LX7 microprocessor
- Main Frequency: 240 MHz
- SRAM: 512KB
- ROM: 384KB
- Flash: 16MB
SKU: n/a
There are no reviews yet.