eSun eResin-PLA Pro-Red

Resin for Monochrome Screen Printers – eSUN’s high-precision eResin PLA Pro is tailored for large build volume printing, ensuring compatibility with both monochrome and color screen printers while printing without residual film or sediment, resulting in a highly successful printing rate.

Precautions:
1. Storage:
1) Store away from light and seal at room temperature.
2) Recommended storage temperature: between 15°C and 35°C in its original container, avoiding dusty or moist environments.

2. Usage:
1) Shake well before use and avoid direct sunlight exposure.
2) Keep out of reach of children and do not ingest.
3) Wear gloves to prevent direct skin contact and ensure proper ventilation.
4) In case of skin contact, wash with plenty of water immediately and seek medical advice if necessary.
5) Clean finished models with alcohol (>95%) for approximately 30 seconds.

Exposure Times:
– Bottom Exposure Time: 30-50 seconds for a layer thickness of 0.05mm, recommended at 40 seconds.
– Normal Exposure Time: 6-10 seconds for a layer thickness of 0.05mm, recommended at 7 seconds on EPAX X1 or 10 seconds on Anycubic Photon.
– Note: Exposure time varies with layer thickness. The provided times are for a thickness of 0.05mm; for 0.1mm thickness, adjust normal exposure time to 12-20 seconds.

Features:
– High strength and balanced performance
– High precision and resolution
– Compatible with mono and GRB screens
– Ideal for making props and dental models requiring high resolution.

Package Includes:

1 x eSun eResin-PLA Pro-Red