-6%
Drone Parts, Drone Transmitter and Receiver
FlySky FS-A8S 2.4G 8CH Mini Receiver Module Rev 2
- Channels: PPM 8CH, i-BUS 18CH.
- Frequency range: 2.408-2.475GHz.
- Bandwidth: 500KHz.
- Band number: 135.
- RX Sensitivity: -92 dBm.
- 2.4GHz system: AFHDS 2A.
- Modulation type: GFSK.
₹1,219.00 ₹1,298.00
The FlySky FS-A8S 2.4G 8CH Mini Receiver Rev 2 is built for use in multi-rotor drones. In the world of racing of drones, the basic requirement is for small and lightweight components that will make a drone more and more nimble. This FS-A8S receiver fits these requirements superbly by being the only 20x14x5.3mm in size and 1.2gm in weight.
It uses the extremely stable AFHDS 2A (Automatic Frequency Hopping Digital System) protocol, supports standard PPM output and has i-BUS support for up to 18 channels.
Specification:
| Model | FS-A8S 2.4G 8CH Mini Rx |
|---|---|
| Operating Voltage (VDC) | 4.0 ~ 8.4V |
| Current Consumption (mA) | 40 |
| Control Distance | 300m |
| No. of Channels | 8 (PPM), 18 (i-BUS) |
| No. of Band | 135 |
| Modulation Type | GFSK |
| RF Range | 2.408-2.475 GHz |
| Bandwidth | 500KHz |
| Rx Sensitivity (dBm) | -92 |
| Signal Output | IBUS, PPM |
| i-Bus Interface | Yes |
| Antenna Length (mm) | 90 |
| Color: | Black |
| Net weight (gm) | 6 |
| Dimensions (mm) LxWxH | 20 x 14 x 5.3 |
| UPC | 711005954549 |
| Shipping Weight | 0.09 kg |
| Shipping Dimensions | 6 × 5 × 4 cm |
Features:
- AFHDS 2A –2.4GHz system.
- SC port: PPM/i-BUS/S.BUS.
- The channel delay is <15mS.
- Certificate: CE0678.
- FCCID: N45ZA8S00.
- Low Voltage Alarm: No.
- Online update: No.
- Compatible with: FS i4 i6 i6S i6X TM10 TM8 Transmitter.
Package Includes:
1 x FlySky FS-A8S 2.4G 8CH Mini Receiver module Rev 2.
1 x Connecting Cable.
Based on 0 reviews
Be the first to review “FlySky FS-A8S 2.4G 8CH Mini Receiver Module Rev 2”
Related products
-
Drone Kit, Drone Parts
Pixhawk 2.4.8 Basic Flight Controller kit with GPS Module
- 1 x Pixhawk V2.4.8 Flight board with Original Shell.
- 1 x 16GB TF card(IO firmware has written).
- 3 x Connecting Cables.
- 1 x Buzzer Module.
- 1 x Pixhawk PPM Encoder Module.
- 1x JR plug 10P input end of the cable 100mm.
- 1 x JR plug 4P output end of the cable 100mm.
- 1 x Glass Fiber Flight Controller Anti-vibration/Shock absorber Set.
- 1x NEO-M8N GPS Module with translucent Shell.
- 2 x cables (APM/PIX).
- 1 x GPS Folding Base Antenna set.
- 1 x APM 2.5.2/2.6/2.8 Pixhawk Power Module.
- 2 x 3.5dbi antennas.
- 1 x 3DR Radio Telemetry with the case(Tx and Rx).
SKU: n/a -
Drone Frame and Accessories, Drone Parts
PDB-XT60 with BEC 5V and 12V
- 4-layers and 1.6mm PCB
- Built-in XT60 Socket
- Total 6 pairs ESC solder tabs are fit for H or X type frame
- Regulated 5V and 12V outputs
- Short circuit tolerantInput voltage range: 9 – 18V DC (3S-4S LiPoly operation)
- Output continuous current: 25Ax4 or 15Ax6
- Output Peak current (10 seconds/minute): 30Ax4 or 20Ax6
- Short-circuit tolerant: 5 seconds/minute
SKU: n/a -
Drone Frame and Accessories, Drone Parts
100A Multirotor ESC Power Distribution Battery Board For Quadcopter
-11%
Drone Frame and Accessories, Drone Parts100A Multirotor ESC Power Distribution Battery Board For Quadcopter
- Material: glass fiber
- Compatible with MK KK flight control installment pitch of holes
- Compatible with MK KK flight control system
- Can connect 1-8 ESC.
- Board Dimensions : 50 x 50 x 2 mm.
- Weight: 8 gm.
- Hole Spacing: 45mm Square and 35mm Square (Compatible with KK 45mm spacing)
SKU: n/a
There are no reviews yet.