The TDR6 Dual-Band Receiver (Tandem dual) band receivers are unlike any other FrSky 2.4Ghz or 900Mhz receivers, they work simultaneously at both 2.4Ghz and 900Mhz frequencies. That means Tandem receivers provide not only low latency signal and long-range control but also benefit from the enhanced level of high reliability and anti-interference performance. The Tandem series receivers adopt a dual-band antenna design (2.4GHz & 900MHz) that provides multi-directional wide coverage for the remote signal. The telemetry data (Power and signal related) can be recorded using the built-in black box module within the Tandem receiver, useful for capturing data from any unusual status during the flight.

TDR6 Dual-Band Receiver offers 6 PWM channel outputs and is bundled in a compact lightweight design, the receiver also provides two 3-pin ports accordingly for SBUS Out and FBUS/S.Port. By setting the S.Port to the FBUS protocol, the TD receivers can open up the possibility of seamlessly pairing with multiple telemetry devices (Neuron ESC, Advance Sensors, etc.) as well as simplifying the build setup.
Package Includes:
1 x FrSky TDR6 Dual-Band Receiver (2.4GHz & 900MHz)
TFMini-S Micro LiDAR Distance Sensor for Drones UAV UAS Robots (12m) UART
APM 2.8 Basic Flight Controller kit with GPS Module Combo Kit
RP2040 Microcontroller IC by Raspberry PI-REEL of 100
F450 / Q450 Quadcopter Frame(PCB Version with Integrated PCB) + Plastic Landing Gear Combo Kit – Made in INDIA
Arduino Nano Board R3 with CH340 chip (Unsoldered)
ARF Quadcopter Economy Combo Kit
X2 ELF 88MM Micro brushless racing kit
2.4GHz NRF24L01+PA+LNA SMA Wireless Transceiver Antenna
Robocat 270 Racing Quadcopter Frame
PDB-XT60 with BEC 5V and 12V
Arduino Nano Board R3 with CH340 chip (soldered pin)
YDLIDAR SDM15 Outdoor 15M Single Point Ranging Laser Sensor
PM2.5 GP2Y1010AU0F Dust Smoke Particle Sensor
Koptan 50mm x 33m High Temperature Resistant Tape for 3D Printers
Official Raspberry Pi Global Shutter Camera 








There are no reviews yet.