GPS/GLONASS GNSS Antenna for Raspberry Pi HAT and Arduino Shield with 3 Meter Cable
- This GPS/GLONASS GNSS Antenna is designed for applications which require high positioning accuracy by combining signals from GPS, GLONASS, systems.
- The tiny size of this antenna allows it to be used in very space restricted environments.
₹189.00 ₹199.00
This GPS/GLONASS GNSS Antenna combines signals from GPS and GLONASS systems to provide great positioning accuracy for applications. This antenna can be employed in extremely space-constrained locations because to its small size. This antenna’s 3-meter cable can be used to improve GPS signals in indoor projects utilizing an Arduino shield or Raspberry Pi HAT. The antenna can be fixed to any surface permanently with the use of double-sided tape, or it can be kept stationary momentarily by its flat magnetic surface.
Reliable performance is achieved with a high gain wide-band patch antenna on an inherent ground. Use in outdoor locations is made possible by an enclosure that is UV resistant and fully IP67 waterproof rated. The arrangement of the mid SAW filter removes potential. Out-of-band power bursts from other adjacent antennas that may be co-located cause LNA burn-out. The antenna is produced in accordance with stringent first-tier automotive quality control procedures.
Specification:
| Typical noise figure | 1.5dB |
|---|---|
| Operating Voltage (VDC) | 3 ~ 7 |
| Operating Current | 15mA |
| Max.GSM Working Frequency | 824-894/1710-1880 MHz |
| VAWR | 2:1 |
| Impendence | 50 Ohms |
| Peak gain | 2dBi at 900mhz,2dBi at 1800mhz |
| Azimuth | Omni-directional polarization, linear polarization |
| Protection Standard | IP67 |
| Connector | SMA-Male |
| Color: | Black |
| Cable Size (AWG) | 2.6 |
| Weight (gm) | 60 |
| Cable Length (Meter) | 3 |
| Shipping Weight | 0.1 kg |
| Shipping Dimensions | 12 × 8 × 4 cm |
Features:
- The antenna assembly consists of a patch antenna for receiving GNSS signals and a preamplifier for signal amplification.
- Power supply to the antenna preamplifier must be provided by the application on the same RF signal trace as the GNSS RF signal is carried to the application.
- The antenna has an internal magnet so that it can be fixed on a metallic surface.
- Easy to use an antenna. Does not require RF or antenna knowledge.
Package Includes:
1 x GPS/GLONASS GNSS Antenna for Raspberry Pi HAT and Arduino Shield with 3 Meter Cable
There are no reviews yet.