High Definition 1200TVL CMOS Camera with 2.1mm Lens FPV Camera for RC Drone Multi-Copter
- Input oltage:5~12 V DC
- Image Sensor: 1/3CMOS SUPER HAD II
- Signal System: PAL
- S/N Ratio: >60Db(AGC OFF)
- Electronic Shutter Speed PAL: 1/50-100.000
- Min illumination: 0.01Lux/1.2F
₹1,399.00 ₹1,499.00
An FPV camera is one of the most crucial parts to have if you want to create a drone. The FPV camera sends images or videos to the receiver. Consequently, the construction of the drone requires a camera. The PAL Video format, which this FPV camera supports, allows you to send data to your receiver through the air. Its lens may be adjusted up to 130 degrees.
It uses a 1/3 CMOS SUPER HAD II Image sensor, which is easy to set up and has low illumination as low as 0.01Lux/1.2F. The camera operates at a frame rate of approximately 50 frames per second, which is optimal for capturing slow-motion video. It may be a great option for your drone or multicopter because of its broad working voltage range of 5 to 12V electricity.
Note: Camera lens is available in 2.8mm and 2.1mm please confirm lens before placing the order.
Specification:
| Image Sensor | 1/3 CMOS SUPER HAD II |
|---|---|
| Horizontal Resolution (TVL) | 1200 |
| Minimum Illumination | 0.01Lux/1.2F |
| AGC & Backlight Compensation | Yes |
| S/N Ratio (dB) | >60 |
| Operating Temperature Range (°C): | -10 to 50 |
| Dimensions in mm (LxWxH) | 26 x 26 x 30 |
| Weight (gm) | 15 |
| Shipping Weight | 0.018 kg |
| Shipping Dimensions | 5 × 3 × 1 cm |
Features:
- Signal System: PAL
- Auto Gain Control(AGC)
- Backlight compensation(BLC)
- WDR D-WDR
- DNR 2DNR
- Day/Night Auto/Color/B*W
Package Includes:
1 x High Definition 1200TVL CMOS Camera.
1 x Connecting Cable & Accessory.
Based on 0 reviews
Be the first to review “High Definition 1200TVL CMOS Camera with 2.1mm Lens FPV Camera for RC Drone Multi-Copter”
Related products
-
-
Drone Kit, Drone Parts
Pixhawk 2.4.8 Basic Flight Controller kit with GPS Module
- 1 x Pixhawk V2.4.8 Flight board with Original Shell.
- 1 x 16GB TF card(IO firmware has written).
- 3 x Connecting Cables.
- 1 x Buzzer Module.
- 1 x Pixhawk PPM Encoder Module.
- 1x JR plug 10P input end of the cable 100mm.
- 1 x JR plug 4P output end of the cable 100mm.
- 1 x Glass Fiber Flight Controller Anti-vibration/Shock absorber Set.
- 1x NEO-M8N GPS Module with translucent Shell.
- 2 x cables (APM/PIX).
- 1 x GPS Folding Base Antenna set.
- 1 x APM 2.5.2/2.6/2.8 Pixhawk Power Module.
- 2 x 3.5dbi antennas.
- 1 x 3DR Radio Telemetry with the case(Tx and Rx).
SKU: n/a
There are no reviews yet.