Holybro Power Module PM02
Available on backorder
- UBEC input voltage : 7~51v (2~12s LiPo)
- Rated current: 60A
- Max current: 120A(<60S)
- Max current sensing: 120A
- Supports: 12S battery
₹3,199.00 ₹3,899.00
Available on backorder
With a 6-pos cable, PM02 offers your APM and Pix32 clean power from a LiPo battery together with monitoring of battery voltage and current consumption. A 12S LiPo battery can supply up to 5.2V and a maximum of 3A to the on-board switching regulator. The Power Module is packed in shrink tubing for protection and is fully constructed with XT60 connectors.
Powering APM, Pix32, an RC receiver, and APM accessories (radio, GPS) is the purpose of the Power Module. Servo powering is not its intended use. Use the ESC/BEC that came with your plane.
Furthermore compatible with the GH terminal are Durandal, Pix32, Pixhawk4, and Pixhawk4 small.
Note: This PM02 Power Module uses analog data output and is not compatible to the Pixhawk 5X (Requires a digital PM like PM02D).
Specification:
| UBEC input voltage | 7~51v (2~12s LiPo) |
|---|---|
| Rated Current(A) | 60 |
| Max Current (A) | 120A(<60S) |
| Max current sensing | 120A |
| Battery Type | 12S battery |
| Shipping Weight | 0.033 kg |
| Shipping Dimensions | 11 × 9 × 2 cm |
Features:
- Light weight
- Best for your DIY projects
- Easy to Use
Packages Includes:
1 x Holybro Power Module PM02
Based on 0 reviews
Be the first to review “Holybro Power Module PM02”
Related products
-
-
Drone Frame and Accessories, Drone Parts
100A Multirotor ESC Power Distribution Battery Board For Quadcopter
-11%
Drone Frame and Accessories, Drone Parts100A Multirotor ESC Power Distribution Battery Board For Quadcopter
- Material: glass fiber
- Compatible with MK KK flight control installment pitch of holes
- Compatible with MK KK flight control system
- Can connect 1-8 ESC.
- Board Dimensions : 50 x 50 x 2 mm.
- Weight: 8 gm.
- Hole Spacing: 45mm Square and 35mm Square (Compatible with KK 45mm spacing)
SKU: n/a -
Drone Kit, Drone Parts
Pixhawk 2.4.8 Basic Flight Controller kit with GPS Module
- 1 x Pixhawk V2.4.8 Flight board with Original Shell.
- 1 x 16GB TF card(IO firmware has written).
- 3 x Connecting Cables.
- 1 x Buzzer Module.
- 1 x Pixhawk PPM Encoder Module.
- 1x JR plug 10P input end of the cable 100mm.
- 1 x JR plug 4P output end of the cable 100mm.
- 1 x Glass Fiber Flight Controller Anti-vibration/Shock absorber Set.
- 1x NEO-M8N GPS Module with translucent Shell.
- 2 x cables (APM/PIX).
- 1 x GPS Folding Base Antenna set.
- 1 x APM 2.5.2/2.6/2.8 Pixhawk Power Module.
- 2 x 3.5dbi antennas.
- 1 x 3DR Radio Telemetry with the case(Tx and Rx).
SKU: n/a
There are no reviews yet.