The HTRC H4AC 20W Compact Balance Charger is an excellent choice for charging 2S-4S Lipo, LiFe, and LiHV batteries. With a lightweight and compact design, it delivers a maximum power of 20W and a charge current of 2.0A. Featuring an AC function and a separate corresponding balance port for each battery pack, it is particularly well-suited for RC cars and helicopters.
Connections:
- Firstly, please connect the H4AC with the power supply, and then the three LED lights will become green, which indicates the charger works in good order.
- Secondly, please connect the 2S-4S Lipo/LiFe/LiHV battery to the balance port, and then select the battery type by pressing the button. If there is any error RED LED will flash.
- To begin the charging long-press the start button and the charging process is started, which is denoted by the blinking of green LED.
- After the Green LED stops blinking, the charging process is finished. Please terminate the charging process.
Warnings:
- Observe any cautions and warnings included with your battery.
- Never leave the charger unsupervised during use. If any malfunction is observed, immediately terminate the process.
- Keep the charger away from moisture, dust, dirt, heat, direct sunlight, and vibration. Do not drop it.
- Double-check all connections prior to starting the charging process. Do not connect with reverse polarity.
- The charger and the battery to be charged should be placed on a heat-resistant, non-flammable, and non-conductive surface. Never place them on a car seat, carpet or similar. Keep flammable and volatile materials well away from the operating area.
- When charging LiPo batteries, we suggest using a LiPo charging safety bag, available from most hobby retailers.
- Never charge a LiPo battery that is swollen in any way.
- To avoid short-circuits between the output power adapter cord input connectors, always connect the adapter cord to the charger first and only then to the battery to be charged. Reverse the sequence when disconnecting.
Package Includes:
1 x HTRC H4AC 20W Compact Balance Charger
1 x 80 cm long AC Input Cord.
1x User manual.
Due AT91SAM3X8E ARM Cortex-M3 Board, 84MHz, 512KB Board compatible with Arduino
ABS Plastic Landing Gear for Quadcopter (Pack of 4) – Made in INDIA
TS832 48Ch 5.8G 600mW Wireless Audio/Video Transmitter for FPV RC
2004 LCD Display Rep-Rap Discount Smart Controller with Adapter
Raspberry Pi Camera Module 3
5.8G UVC OTG Android AV Phone Receiver
Pixhawk 2.4.7 Upgraded Flight Controller kit with GPS Module Combo Kit
TFMini-S Micro LiDAR Distance Sensor for Drones UAV UAS Robots (12m) UART
Mark4 5 inch 225mm carbon fiber frame kit
F450 F550 / Q450 Q550 Replacement Arm Red (220mm) – Made in INDIA
Mega +WiFi R3 Atmega2560+NodeMCU ESP8266 32Mb Memory USB-TTL CH340G Compatible For Arduino Mega
ASAIR AHT25 Integrated temperature and humidity sensor -40 ~+ 80 ℃
100A Multirotor ESC Power Distribution Battery Board For Quadcopter
YDLIDAR SDM15 Outdoor 15M Single Point Ranging Laser Sensor
Creality Spider High Temperature and High Flow Hotend Pro
Panasonic Passive Infrared (PIR) Wall Installation Type Motion Sensor
Official Raspberry Pi Camera NOIR V2 








There are no reviews yet.