The HTRC H4AC 20W Compact Balance Charger is an excellent choice for charging 2S-4S Lipo, LiFe, and LiHV batteries. With a lightweight and compact design, it delivers a maximum power of 20W and a charge current of 2.0A. Featuring an AC function and a separate corresponding balance port for each battery pack, it is particularly well-suited for RC cars and helicopters.
Connections:
- Firstly, please connect the H4AC with the power supply, and then the three LED lights will become green, which indicates the charger works in good order.
- Secondly, please connect the 2S-4S Lipo/LiFe/LiHV battery to the balance port, and then select the battery type by pressing the button. If there is any error RED LED will flash.
- To begin the charging long-press the start button and the charging process is started, which is denoted by the blinking of green LED.
- After the Green LED stops blinking, the charging process is finished. Please terminate the charging process.
Warnings:
- Observe any cautions and warnings included with your battery.
- Never leave the charger unsupervised during use. If any malfunction is observed, immediately terminate the process.
- Keep the charger away from moisture, dust, dirt, heat, direct sunlight, and vibration. Do not drop it.
- Double-check all connections prior to starting the charging process. Do not connect with reverse polarity.
- The charger and the battery to be charged should be placed on a heat-resistant, non-flammable, and non-conductive surface. Never place them on a car seat, carpet or similar. Keep flammable and volatile materials well away from the operating area.
- When charging LiPo batteries, we suggest using a LiPo charging safety bag, available from most hobby retailers.
- Never charge a LiPo battery that is swollen in any way.
- To avoid short-circuits between the output power adapter cord input connectors, always connect the adapter cord to the charger first and only then to the battery to be charged. Reverse the sequence when disconnecting.
Package Includes:
1 x HTRC H4AC 20W Compact Balance Charger
1 x 80 cm long AC Input Cord.
1x User manual.
Q100 Brushed Quad-copter Frame
Official Raspberry Pi Camera V2
SeeedStudio Grove Water Atomization v1.0
ESPLORA Joystick Photosensitive Sensor Board, Support LCD Compatible with Arduino
Pixhawk 2.4.8 Basic Flight Controller kit with GPS Module
ARF Quadcopter Upgraded Combo Kit
IR-Cut Camera 5 Mp OV5647 Manually Switch Day And Night Mode Module Raspberry Pi 3 Camera
Shock Absorbing 2 Axis Brushless Gimbal Kit for Card Type Cameras – Carbon Fiber Version
Official Arduino Portenta H7 Dual Core AI & IoT Development Board ABX00042
Flysky FS-i6X 2.4GHz 6CH AFHDS 2A RC Transmitter With FS-iA10B 2.4GHz 10CH Receiver
Creality -Ender-3 V2 Slient Motherboard
ARF Quadcopter Economy Combo Kit
500mm Trapezoidal 4 Start Lead Screw 8mm Thread 2mm Pitch Lead Screw with Copper Nut
TS5828L 5.8G 600MW 40CH Transmitter with Antenna
Official Raspberry Pi Camera NOIR V2
Uno R3 Board without Cable compatible with Arduino
Official Raspberry Pi 16mm Telephoto Lens for Pi High Quality Camera
Creality Ender 3 V3 SE 3D Printer
100A Multirotor ESC Power Distribution Battery Board For Quadcopter
5-Channel Flame Sensor Module 








There are no reviews yet.