The HTRC H4AC 20W Compact Balance Charger is an excellent choice for charging 2S-4S Lipo, LiFe, and LiHV batteries. With a lightweight and compact design, it delivers a maximum power of 20W and a charge current of 2.0A. Featuring an AC function and a separate corresponding balance port for each battery pack, it is particularly well-suited for RC cars and helicopters.
Connections:
- Firstly, please connect the H4AC with the power supply, and then the three LED lights will become green, which indicates the charger works in good order.
- Secondly, please connect the 2S-4S Lipo/LiFe/LiHV battery to the balance port, and then select the battery type by pressing the button. If there is any error RED LED will flash.
- To begin the charging long-press the start button and the charging process is started, which is denoted by the blinking of green LED.
- After the Green LED stops blinking, the charging process is finished. Please terminate the charging process.
Warnings:
- Observe any cautions and warnings included with your battery.
- Never leave the charger unsupervised during use. If any malfunction is observed, immediately terminate the process.
- Keep the charger away from moisture, dust, dirt, heat, direct sunlight, and vibration. Do not drop it.
- Double-check all connections prior to starting the charging process. Do not connect with reverse polarity.
- The charger and the battery to be charged should be placed on a heat-resistant, non-flammable, and non-conductive surface. Never place them on a car seat, carpet or similar. Keep flammable and volatile materials well away from the operating area.
- When charging LiPo batteries, we suggest using a LiPo charging safety bag, available from most hobby retailers.
- Never charge a LiPo battery that is swollen in any way.
- To avoid short-circuits between the output power adapter cord input connectors, always connect the adapter cord to the charger first and only then to the battery to be charged. Reverse the sequence when disconnecting.
Package Includes:
1 x HTRC H4AC 20W Compact Balance Charger
1 x 80 cm long AC Input Cord.
1x User manual.
Raspberry Pi Camera Module 3
5.8G 3dBi 4 Leaf Clover RHCP SMA Antenna with Cover for FPV Multicopter
37 in 1 Sensors Kit compatible with Arduino
Official Raspberry Pi 6 mm Wide Angle Lens for Pi High Quality Camera
ESP8266 NodeMCU CP2102 Board
EWRF TS5823 600mW Wireless Video Transmitter
RP2040 Microcontroller IC by Raspberry PI-REEL of 100
Fatshark ImmersionRC SpiroNet 5.8GHz RP-SMA Antenna
HSKRC 3 Inch 140mm Carbon Fiber Racing Kit
Pixhawk 2.4.8 Basic Flight Controller kit with GPS Module
Creality -Carborundum Glass Platform
Raspberry Pi Pico W
QX 95 Quad-Copter Combo kit with Radiolink flight controller
MH-Z19 Infrared CO2 Sensor Module for CO2 monitor
IX2 90mm Micro FPV Racing kit
PIR2 433mhz Human Infrared Sensor for Sonoff RF Bridge
100A Multirotor ESC Power Distribution Battery Board For Quadcopter
Nova PM Sensor SDS011 High Precision Laser pm2.5 Air Quality Detection Sensor
Due AT91SAM3X8E ARM Cortex-M3 Board with Micro USB Cable Compatible with Arduino
Official Raspberry Pi 16mm Telephoto Lens for Pi High Quality Camera
APEX DC HD 5” FPV Frame Kit
3D Touch Auto Leveling Sensor
QX95 Quad-copter Combo Kit 








There are no reviews yet.