The HTRC H4AC 20W Compact Balance Charger is an excellent choice for charging 2S-4S Lipo, LiFe, and LiHV batteries. With a lightweight and compact design, it delivers a maximum power of 20W and a charge current of 2.0A. Featuring an AC function and a separate corresponding balance port for each battery pack, it is particularly well-suited for RC cars and helicopters.
Connections:
- Firstly, please connect the H4AC with the power supply, and then the three LED lights will become green, which indicates the charger works in good order.
- Secondly, please connect the 2S-4S Lipo/LiFe/LiHV battery to the balance port, and then select the battery type by pressing the button. If there is any error RED LED will flash.
- To begin the charging long-press the start button and the charging process is started, which is denoted by the blinking of green LED.
- After the Green LED stops blinking, the charging process is finished. Please terminate the charging process.
Warnings:
- Observe any cautions and warnings included with your battery.
- Never leave the charger unsupervised during use. If any malfunction is observed, immediately terminate the process.
- Keep the charger away from moisture, dust, dirt, heat, direct sunlight, and vibration. Do not drop it.
- Double-check all connections prior to starting the charging process. Do not connect with reverse polarity.
- The charger and the battery to be charged should be placed on a heat-resistant, non-flammable, and non-conductive surface. Never place them on a car seat, carpet or similar. Keep flammable and volatile materials well away from the operating area.
- When charging LiPo batteries, we suggest using a LiPo charging safety bag, available from most hobby retailers.
- Never charge a LiPo battery that is swollen in any way.
- To avoid short-circuits between the output power adapter cord input connectors, always connect the adapter cord to the charger first and only then to the battery to be charged. Reverse the sequence when disconnecting.
Package Includes:
1 x HTRC H4AC 20W Compact Balance Charger
1 x 80 cm long AC Input Cord.
1x User manual.
ARF Quadcopter Economy Combo Kit
5.8G UVC OTG Android AV Phone Receiver
Q100 Brushed Quad-copter Frame
SeeedStudio Grove Water Atomization v1.0
Pixhawk 2.4.8 Basic Flight Controller kit with GPS Module
IR-Cut Camera 5 Mp OV5647 Manually Switch Day And Night Mode Module Raspberry Pi 3 Camera
Mega +WiFi R3 Atmega2560+NodeMCU ESP8266 32Mb Memory USB-TTL CH340G Compatible For Arduino Mega
5-Channel Flame Sensor Module
TFMini Plus LiDAR Distance Sensor for Drones Robots IoT ITS Smart Detection (12m)
Koptan 50mm x 33m High Temperature Resistant Tape for 3D Printers
Creality Hotbed Control Module
Raspberry Pi Camera Module 3 Wide
Mark4 5 inch 225mm carbon fiber frame kit
0.3MP OV7670 Camera Module with High Quality SCCB Connector
Uno R3 CH340G ATmega328p Development Board with Micro-USB
Raspberry Pi Pico H - Pico with Headers Soldered
TFMini-S Micro LiDAR Distance Sensor for Drones UAV UAS Robots (12m)
Ready to Sky Plastic Landing Gear for Quadcopter 








There are no reviews yet.