LilyPad Arduino 328 Main Board ATmega328P ATmega328 16M For Arduino
- Board will run from 2V to 5V.
- The latest version of the LilyPad supports automatic reset for even easier programming.
- The back side of the LilyPad is now completely flat!
- We now use a surface mount programming connector to keep the header from poking through.
- This version of the LilyPad now uses the new ATmega328 at 8MHz.
- Arduino 0016 supports the Pro Mini Arduino 328/8MHz/16MHZ.
- Use this setting when using this new LilyPad 328.
₹580.00 ₹680.00
The LilyPad Arduino 328 Main Board is an Arduino-program micro-controller design to be easily integrate into e-textiles and wearable projects. It offers the same functionality you find in other Arduino boards, in a lightweight, round package design to minimize snagging and profile. With wide tabs that can be sewn down and connect with conductive thread.
The LilyPad Arduino consists of an ATmega328 with the Arduino bootloader and a minimum number of external components to keep it as small (and as simple) as possible. This board will run from 2V to 5V and offers large pin-out holes that make it easy to sew and connect. Each of these pins, with the exception of (+) and (-), can control an attache input or output device (like a light, motor, or switch).
LilyPad is a wearable e-textile technology develop by Leah Buechley and cooperatively design by Leah and SparkFun. Each LilyPad was creatively design to have large connecting pads to allow them to be sewn into clothing. Various input, output, power, and sensor boards are available. They’re even washable!
Specifications :
| Model Type | LilyPad Arduino |
| Microcontroller Chip | ATmega168 or ATmega328V |
| Operating Voltage | 2.7V-5.5 V |
| Input Voltage(Recommended) | 2.7V-5.5 V |
| Analog I/O Pins | 6 |
| Digital I/O Pins | 14 |
| PWM Digital I/O Pins | 6 |
| Flash Memory | 16 KB (of which 2 KB used by bootloader) |
| SRAM | 1 KB |
| EEPROM | 512 bytes |
| DC Current per I/O Pin | 40 mA |
| Clock Speed | 8 MHz |
| Diameter | 50 mm |
| Weight (gm) | 5 |
Package Includes :
- 1 x LilyPad Arduino 328 Main Board.
Based on 0 reviews
Only logged in customers who have purchased this product may leave a review.
Related products
-
Development Boards, Arduino Boards and Accessories
Arduino Nano Board R3 with CH340 chip (soldered pin)
-22%
Development Boards, Arduino Boards and AccessoriesArduino Nano Board R3 with CH340 chip (soldered pin)
- The Arduino Nano Board R3 with CH340 is another popular Arduino development board very much similar to the Arduino UNO They use the same Processor (Atmega328p) and hence they both can share the same program.
SKU: n/a -
Official Arduino Boards
Nano Board R3 with CH340 Chip without USB Cable Compatible with Arduino (Unsoldered)
-6%
Official Arduino BoardsNano Board R3 with CH340 Chip without USB Cable Compatible with Arduino (Unsoldered)
- Operating Voltage (logic level): 5V
- 8 analog inputs ports: A0 ~ A7
- 14 Digital input / output ports: TX, RX, D2 ~ D13
- 1 pair of TTL level serial transceiver ports RX / TX
- Using Atmel Atmega328P-AU MCU
- Standard 0.1” spacing DIP (breadboard friendly).
SKU: n/a -
Development Boards, Arduino Boards and Accessories
L293D Motor Driver/Servo Shield for Arduino
1. Can drive 4 DC motors or 2 stepper motors or 2 Servos
2. 2 interface for 5V Servo connected to the high-resolution dedicated timer no jitter
2. Up to 4 bi-directional DC motors with individual 8-bit speed selection
4. Up to 2 stepper motors with single coil, double coil or interleaved stepping.
5. 4 H-Bridges: per bridge provides 0.6A (1.2A peak current) with thermal protection, can run motors on 4.5V to 36V DCSKU: n/a
There are no reviews yet.