Mamba F4 pro V2 flight controller

Name: Mamba F4 pro V2 flight controller
SKU: 9840
Availability: BackOrder

Availability:

Available on backorder

Add to wishlist

Model: Mamba F4 pro V2
Input voltage: 2 – 6s LiPo support
Gyroscope: MPU6000 (reserved external gyroscope interface)
Firmware: BetaFlihgt 3.2.0 OMNIBUSF4SD
Support Receiver: PPM, SBUS, IBUS, DSM2/DSMX Receiver (UART1)
Integrated with OSD, support BF Ground Station adjust OSD
Adjust the PID by OSD by remote control

₹2,999.00 ~~₹3,199.00~~

Available on backorder

Description
Reviews

To construct your F4 V2 pro flight controller, stack the Mamba F4 pro+V2 flight controller with the ESC of your choice. This F4 Pro Plus V2 weighs 13g net and measures 36 x 36 mm with mounting holes spaced at a 30.5 x 30.5 mm pitch. This Omnibus F4 Flight Controller has an STM32F405 processor installed.

Specification:

Model	Mamba F4 pro V2
Input Voltage (V)	2 – 6s LiPo support
BEC Output	5V 3A
FPV Transmitter	5.8G 40CH 25/200/600/800mW
Frequency (MHz)	5362 – 5945MHz
Audio Bandwidth	6.5MHz
Video Bandwidth	18MHz
Video Format Supported	NTSC / PAL
Channel	40CH
Transmit power	25 / 200 / 600 / 800mW switchable
Transmission Distance	200m @ 25mW 2KM @ 200mW 4KM @ 600mW 6KM @ 800mW
Gyroscope	MPU6000 (reserved external gyroscope interface)
Support Receiver	PPM, SBUS, IBUS, DSM2/DSMX Receiver (UART1)
Working Voltage	DC 7 – 24V
Operating Current	240mA @ 25mW 340mA @ 200mW 520mA @ 600mW 600mA @ 800mW
Connector	MMCX
Weight (gm)	15
Board Dimensions	30.5×30.5 x 9 mm
Shipping Weight	0.03 kg
Shipping Dimensions	7 × 6 × 3 cm