Mikroe HALL CURRENT 15 CLICK

Built upon the TMCS1101-Q1, the Hall Current 15 Click offers precise current sensing capabilities. This Hall-effect current sensor boasts a working voltage isolation of 600V and maintains a full-scale error of less than 1.5% across temperature variations. Texas Instruments provides device options supporting both unidirectional and bidirectional current sensing.

The internal 1.8mΩ conductor facilitates the flow of input current, generating a magnetic field that is subsequently measured by an integrated Hall-effect sensor and amplified through a precision signal chain. With a bandwidth of 80kHz, the device accommodates AC and DC current measurements. It is engineered for high accuracy and temperature stability, with compensation for offset and sensitivity across the operational temperature range.

This Click board™ offers two communication options with the MCU. The analog output signal from the TMCS1101-Q1 can either be converted to a digital value using the ADC101C021, a 10-bit resolution analog-to-digital converter from Texas Instruments, via a 2-wire I2C compatible interface, or it can be directly routed to an analog pin on the mikroBUS™ socket labeled as AN. Selection between these options is facilitated by an onboard SMD switch labeled as OUT SEL, which can be set to either the AN or ADC position as appropriate.

The ADC101C021 supports data transfer in modes up to High-Speed and includes an alert function. This function triggers an interrupt routed to the ALR pin of the mikroBUS™ socket when the analog input surpasses a programmable upper or lower limit value.

Applications for this Click board™ include AC or DC current-sensing in industrial and commercial systems, motor and load control, power factor correction, overcurrent protection, and various other uses.

Features:

1. Type: Hall Current Sensor Module
2. Interface Analog, I2C
3. Compatibility mikroBUS
4. Click board size:  57.15 x 25.4 mm
5. Input Voltage 3.3V or 5V
6. High accuracy and precision,
7. Excellent linearity and temperature stability
8. 3kVRMS isolation rating, robust 600V lifetime working voltage
9. Bidirectional and unidirectional current sensing
10. On-board modules TMCS1101-Q1 – galvanically isolated Hall-effect current sensor capable of DC or AC current measurement from Texas Instruments
    

    ---

    Pinout Diagram:

    This table shows how the pinout on Hall Current 15 Click corresponds to the pinout on the mikroBUS™ socket.

    Notes	Pin					Pin	Notes
    Analog Signal	AN	1	AN	PWM	16	NC
    	NC	2	RST	INT	15	ALR	ADC Alert
    	NC	3	CS	RX	14	NC
    	NC	4	SCK	TX	13	NC
    	NC	5	MISO	SCL	12	SCL	I2C Clock
    	NC	6	MOSI	SDA	11	SDA	I2C Data
    Power Supply	3.3V	7	3.3V	5V	10	5V	Power Supply
    Ground	GND	8	GND	GND	9	GND	Ground

    ---

    Onboard setting and Indicators:

    Label	Name	Default	Description
    LD1	PWR	–	Power LED Indicator
    JP1	VCC SEL	Left	Logic Level Voltage Selection 3V3/5V: Left position 3V3, Right position 5V
    JP2	OUT SEL	Left	Output Voltage A/D Selection AN/ADC: Left position AN, Right position ADC

    ---

    Package Includes:

    1 x Mikroe HALL CURRENT 15 CLICK