Naze 32 Full REV6 Flight Controller with Compass & Barometer is the newest version, rev6, of the popular Full Naze32 flight controller board by Abuse Mark Made in JAPAN. At the heart of the Naze32 are a 32bit ST micro workhorse of a processor, with untapped memory and CPU power and a host of equally impressive sensors. The Naze is also matched up with some of the nicest GUI programs. Also features to get the most out of your configuration.
This is an amazing flight controller for a multirotor. This “Full” version is the same as the Acro Naze32 board except the full version comes with the featured MS5611 barometer and a magnetometer which is a step up from the acro version. You should use this flight controller if you want to use GPS options such as return to home, hold, speed indication via telemetry or OSD, And Coordinates, RTH arrow, heading and altitude information in an On-Screen Display.
All the revision 6 boards include a built-in black box flight data recorder which is great. The 6 DOF, Acro, and 10 DOF naze boards have 16Mbit onboard SPI flash. However, the Full version includes 128Mbit onboard SPI flash so this just means you can store more flight logs on your full board. These come with pin headers (straight and right angle options), NOT soldered to the board.
Note: NAZE boards can vary in color from batch to batch, a random color will be shipped as per the availability.
Warning: There is no reverse voltage polarity protection built into this board, so if you connect your power backward you will instantly destroy the hardware.
Specification:
| Input Voltage (V) | 5 VDC |
|---|---|
| Sensors | 3-Axis Gyrometer, Accelerometer, Compass & Barometer |
| Processor | MPU6050, STM32 F103 |
| Micro-SD Card Slot | Yes |
| Dimensions (mm) LxWxH | 36 x 36 x 7 |
| Weight (gm) | 10 |
| Shipping Weight | 0.02 kg |
| Shipping Dimensions | 6 × 4 × 1 cm |
Features:
- 2000 degrees/second 3-axis MEMS gyro + accelerometer (MPU6500)
- Input voltage: Max 16V on input rail and up to 35V 6s on the voltage sense line
- USB on right side
- PPM/PWM input as through-hole
- 3.3V, I2C on standard-size headers
- Fully pinout compatible with rev5 accessories (OSDoge etc)
- SBUS Inverter
- Spectrum satellite
- Sonar pads w/resistors added for direct connection to 5V sonar
- All extra pads (FT, GP, A5) on top, only sonar on bottom
- MS5611 barometer
- 128mbit flash
Package Includes:
1 x Naze 32 Full REV6 Flight Controller board
1 x 3*6 Pin Header (Right angle)
1 x 2*5 Pin Header (Right angle)
1 x 3*6 Pin Header (Straight)
1 x 1*10 Pin Header (Right angle)
1 x 1*10 Pin Header (Straight)
1 x 2*5 Pin Header (Straight)
1 x Connecting Cable
1 x Plastic Case
Robocat 270 Racing Quadcopter Frame
10 x 15mm 1m Cable Drag Chain Wire Carrier
ASAIR DHT20 SIP Packaged Temperature and Humidity Sensor -40 ~ + 80 ℃
TS835 Fpv 5.8G 600Mw 48Ch (2-6S) Wireless Av Transmitter
Official Raspberry Pi Keyboard, White/Red
100A Multirotor ESC Power Distribution Battery Board For Quadcopter
WT32-ETH01 V1.2 Serial to Ethernet Module Gateway Module with WiFi +Bluetooth
Raspberry Pi 4 Model-B with 4 GB RAM
2.8 inch SPI Touch Screen Module TFT Interface 240*320
X6B 2.4G 6CH i-BUS PPM PWM Receiver for AFHDS
QX 95 Quad-Copter Combo kit with Radiolink flight controller
Official Raspberry Pi 4 Case-Red-White
Ready to Sky Plastic Landing Gear for Quadcopter
LilyPad 328 ATmega328P Main Board 16M Compatible with Arduino
Raspberry Pi Accessory, Raspberry Pi 4 Model B Official PSU, USB-C, 5.1V, 3A, UK Plug, White
LD Robot D100 Triangulation Lidar
NodeMCU CP2102 Board ESP8266
HSKRC 3 Inch 140mm Carbon Fiber Racing Kit 










There are no reviews yet.