This GPS Module is required if you are using a drone to navigate a distance while you are on the go. GPS drones have a GPS module installed, which enables them to track their position in relation to a satellite network that is in orbit. The drone may accomplish tasks like autonomous flight, waypoint navigation, position hold, and home return by connecting to signals from these satellites.
Neo 7M GPS module with digital compass HMC5883L included. The 56-channel, high-sensitivity, low-power NEO 7 series GPS module provides accurate position updates at a rate of 10Hz. This GPS module is perfect for using on your aircraft or quadcopter because it also comes with a molded plastic shell that protects it from the weather.
Compared to the previous Neo 6 series modules, the Neo 7M GPS module produces a better GPS signal thanks to its active circuitry ceramic patch antenna. In addition, this Neo 7 module has an I²C EEPROM to save the configuration settings and a rechargeable backup battery to enable HOT starts. This GPS module is preconfigured to operate at 38400 Baud and with APM/Pixhawk systems right out of the box. There are two cords included with this GPS module: a 4-pin connector for the i2c compass and a 6-pin connector for the GPS module.
Note:
1.APM 2.5 and APM 2.0 have an internal compass (unlike APM 2.6) which must be disabled by cutting a trace before you can connect the 3DR GPS + Compass module (the video here shows how).
2.Other than disabling the internal compass, connecting them is the same for APM2.0/APM2.5 as for APM2.6.
Specification:
| Model | Ublox NEO 7M |
|---|---|
| Receiver Type | 56 Channels, Galileo E1B/C1, GPS L1C/A, QZSS L1C/A, SBAS L1C/A |
| Receiver Frequency | L1 [1575.42MHz] |
| Input Supply Voltage (VDC) | 3.5 ~ 5.5 |
| Main Chip | U-BLOX NEO-7M |
| Sensitivity (dBm) | -155, -160, Cold Start (without aiding): -147 dBm, Tracking & Navigation: -161 dBm |
| Position Accuracy (Meter) | 2, 2.5 |
| Acceleration (g) | <4 |
| Navigation Update Rate | 5Hz |
| Operating Temperature Range (°C): | -24 to 84 |
| Tracking Sensitivity (dBm) | -161 dBm |
| Co-Ordinate System | WGS-84 |
| Capture Time | 0.1s Average |
| Avg Cold Start Time (s) | 38 |
| Warm Start Time (s) | 35 |
| Boot Time | 1S |
| Maximum Altitude (m) | 18000 |
| Maximum Speed | 515 m/s |
| Dimensions (mm) LxWxH | 60 x 11.5 (DxH) |
| Weight (gm) | 26 |
| Cable Length (cm) | 20 |
| Shipping Weight | 0.08 kg |
| Shipping Dimensions | 8 × 8 × 5 cm |
Features:
- Locate performance
- These are Pre-configured, Flashed with the correct settings, and tested. To make them Plug and Play.
- Super Bright LED
- Backplane with Standard Mk style mounting holes 45mm X 45mm
- 38400 bps (Default) Changed to 115200bps!
- Output GGA, GSA, and RMC frames
- 1Hz (Default) Changed to 5Hz!
- Permanent Configuration Retention
- compass on board
- 6 pin connector for EZ connect to MEGA BLACK
- 4 pin connector for only GPS use
- 4 pin connector for compass only use
- Can use both 4 pins at once.
Package Includes:
1 x Neo 7M GPS module.
Q250 Quadcopter Super Strong Carbon Fiber 4mm Arm FPV Racing Frame(250mm) Kit
720 Magnetic Micro Coreless Motor + 55 MM Propeller for Micro Quadcopters – (Set of 4Pcs)
Mark4 5 inch 225mm carbon fiber frame kit
EMAX Formula Series 45A ESC support BLHELI_32 ESC Dshot1200
ESC Power Distribution Board Soldered XT60 Plug & 3.5mm Banana Bullet Connectors For 250mm Multicopter FPV
Pixhawk 2.4.8 Basic Flight Controller kit with GPS Module
ARF Quadcopter Economy Combo Kit
F450 / Q450 Quadcopter Frame – PCB Version Frame Kit with Integrated PCB – Made in INDIA
HSKRC 3 Inch 140mm Carbon Fiber Racing Kit
QX95 Quad-copter Combo Kit
UNO R3 CH340G ATMega328P compatible with arduino + Cable + Transparent Acrylic Case For Uno R3
APM 2.8 Basic Flight Controller kit with GPS Module Combo Kit
PDB-XT60 with BEC 5V and 12V
Waveshare Quad GPIO Expander for Raspberry Pi Pico
ReadytoSky 30A 2-6S ESC Banana connector
IX2 90mm Micro FPV Racing kit
Z25 CNC Aluminum Folding Arm Tube Joint
STMICROELECTRONICS Expansion Board, VD6283, STM32 Nucleo Boards
Q100 Brushed Quad-copter Frame
Nano Board R3 with CH340 Chip without USB Cable Compatible with Arduino (Unsoldered)
EMAX MT2213 935KV Brushless DC Motor ? Black Cap (CW Motor Rotation) With Prop1045 Combo (Original)
Assassin 5 inch 222mm Drone Racing frame Kit 









There are no reviews yet.