With its onboard compass, low power consumption, and high precision, the new generation NEO-M8N High Precision GPS Module for PIXHAWK and APM FC is ready to connect to PIXHAWK FC. Its accuracy is 0.6 meters, or nearly 0.9 meters, which is greater than that of the previous generation NEO-7N, which had an accuracy of 1.4–1.6 meters. It also supports GPS/QZSS L1 C/A, GLONASS L10F, BeiDou B1 protocol, and more.
Additionally, by simply swapping out the additional 5-pin connector included in the package, you may connect the same module to the APM Flight Controller. So if you want GPS telemetry for your FPV flying or camera ship? This new generation GPS NEO-M8N is the answer. Capable of accuracy between 0.6 and 0.9 meters it is a significant improvement over previous models. Sattelite searching and acquisition is very fast, generally taking around ten seconds to locate and acquire up to 6 satellites. It also has a built-in compass with a 10Ghz refresh rate and a low noise figure which ensures this GPS module offers excellent performance.
Connector difference of PIXHAWK and APM FC:
Note: This Module comes with 6 pin connectors connected by default (i.e. Ready to connect to PIXHAWK FC) and extra 5 pin connectors for APM FC for Swapping.
Specification:
| Model | Ublox NEO-M8N |
|---|---|
| Receiver Type | 72-channel Ublox M8 engine. |
| Main Chip | Ublox NEO-M8N |
| Input Supply Voltage (VDC) | 0.5 ~ 3.6 |
| Sensitivity (dBm) | Tracking & Navigation: -161 dBm |
| Position Accuracy (Meter) | 2, 2.5 |
| Acceleration (g) | <4 |
| Navigation Update Rate | up to 18 HZ. |
| Operating Temperature Range (°C): | -45 to 105 |
| Tracking Sensitivity (dBm) | -161 dBm |
| Co-Ordinate System | WGS-84 |
| Capture Time | 0.1s Average |
| Avg Cold Start Time (s) | 30 |
| Warm Start Time (s) | 1 |
| Boot Time | 1S |
| Maximum Altitude (m) | 18000 |
| Dimensions (mm) LxWxH | 54 x 22 (Dia x W) |
| Weight (gm) | 23 |
| Cable Length (cm) | 20 |
| Shipping Weight | 0.06 kg |
| Shipping Dimensions | 7 × 6 × 6 cm |
Features:
- GPS/QZSS L1 C/A, GLONASS L10F, BeiDou B1
- SBAS L1 C/A: WAAS, EGNOS, MSAS
- Galileo-ready E1B/C (NEO-M8N)
- Onboard Compass
- Assistance AssistNow GNSS Online
- AssistNow GNSS Offline (up to 35 days)
- AssistNow Autonomous (up to 6 days)
- OMA SUPL & 3GPP compliant
- Oscillator TCXO (NEO-M8N/Q),
- Crystal (NEO-M8M)
- RTC crystal Built-In
- Noise figure On-chip LNA (NEO-M8M). Extra LNA for
- lowest noise figure (NEO-M8N/Q)
- Anti-jamming Active CW detection and removal. Extra
- onboard SAW bandpass filter (NEO-M8N/Q)
- Memory ROM (NEO-M8M/Q) or Flash (NEO-M8N)
- Supported antennas Active and passive
- Odometer Travelled distance
- Data-logger For position, velocity, and time (NEO-M8N)
Package Includes:
1 x NEO M8N GPS for Pixhawk and APM flight controller
1 x Extra 5-pin Connector for APM FC
Note: This is a product of ReadyToSky brand powered by Ublox chip inside
STM32F030F4P6 core board development board core ARM CORTEX-M0
QX 95 Quad-Copter Combo kit with Radiolink flight controller
QX95 Quad-copter Combo Kit
SIYI A2 MINI Ultra Wide Angle FPV Gimbal Single Axis Tilt with160 Degree FOV
Raspberry Pi 4 Model-B with 4 GB RAM
Assassin 5 inch 222mm Drone Racing frame Kit
Uno R3 CH340G ATmega328p Development Board with Micro-USB
APEX DC HD 5” FPV Frame Kit
Uno R3 Board without Cable compatible with Arduino
Raspberry Pi Compute Module 4 – 4GB RAM, 32GB eMMC, 2.4/5.0GHz Wi-Fi & Bluetooth 5.0 (CM4104032)
Q100 Brushed Quad-copter Frame
Waveshare Arduino Compatible Base Board For Raspberry Pi Compute Module 4, HDMI, USB, M.2 Slot
Arducam 16MP IMX519 (NOIR) Camera Module for All Raspberry Pi Models
IR Lens for OpenMV Cam 7
Robocat 270 Racing Quadcopter Frame
PDB-XT60 with BEC 5V and 12V
X2 ELF 88MM Micro brushless racing kit
Ready to Sky Q450 Quadcopter Frame – PCB Version Frame Kit with Integrated PCB
ARF Quadcopter Advanced Combo Kit
Pixhawk 2.4.7 Upgraded Flight Controller kit with GPS Module Combo Kit
Arducam 8MP IMX219 Camera for Raspberry Pi 4 Model B, Pi 3/3B+, Pi Zero 2W and More 







There are no reviews yet.