This GPS Module is required if you are using a drone to navigate a distance while you are on the go. GPS drones have a GPS module installed, which enables them to track their position in relation to a satellite network that is in orbit. The drone may accomplish tasks like autonomous flight, waypoint navigation, position hold, and home return by connecting to signals from these satellites.
The new Neo-M8N GPS module comes with an HMC5883L digital compass. It is called the NEO-M8N High Precision GPS Module with Built-in Compass for APM and PIXHAWK FC. This module has active circuitry for the ceramic patch antenna and a high degree of sensitivity. Additionally, a plastic casing is included to shield the module from the weather. This module features a rechargeable backup battery for warm starts in addition to producing precise position updates at a rate of 10Hz. You may utilize Pixhawk and APM with the NEO-M8N, which is set up to operate at a baud rate of 38400 (you may need to adjust the cable to fit your autopilot board).
Specification:
| Model | Ublox NEO-M8N |
|---|---|
| Receiver Type | 72-channel Ublox M8 engine. |
| Main Chip | Ublox NEO-M8N |
| Sensitivity (dBm) | 156, Cold Start (without aiding): -147 dBm |
| Position Accuracy (Meter) | 2, 2.5 |
| Acceleration (g) | <4 |
| Navigation Update Rate | up to 18 HZ. |
| Operating Temperature Range (°C): | -45 to 105 |
| Tracking Sensitivity (dBm) | -161 dBm |
| Co-Ordinate System | WGS-84 |
| Capture Time | 0.1s Average |
| Avg Cold Start Time (s) | 30 |
| Warm Start Time (s) | 1 |
| Boot Time | 1S |
| Maximum Altitude (m) | 18000 |
| Weight (gm) | 33 |
| Cable Length (cm) | 20 |
| Input Supply Voltage (VDC) | 0.5 ~ 3.6 |
| Dimensions (mm) LxWxH | 54 x 22 (Dia x W) |
| Shipping Weight | 0.12 kg |
| Shipping Dimensions | 8 × 8 × 3 cm |
Features:
- GPS/QZSS L1 C/A, GLONASS L10F, BeiDou B1.
- SBAS L1 C/A: WAAS, EGNOS, MSAS.
- Galileo-ready E1B/C (NEO-M8N).
- Nav. update rate1 Single GNSS: up to 18 HZ.
- Assistance AssistNow GNSS Online.
- Assist Now GNSS Offline (up to 35 days)3.
- Assist Now Autonomous (up to 6 days).
- OMA SUPL & 3GPP compliant
- Oscillator TCXO (NEO-M8N/Q).
- Crystal (NEO-M8M).
- RTC crystal Built-In.
- Noise figure On-chip LNA (NEO-M8M). Extra LNA for.
- lowest noise figure (NEO-M8N/Q).
- Anti-jamming Active CW detection and removal.
- An extra onboard SAW bandpass filter (NEO-M8N/Q).
- Memory ROM (NEO-M8M/Q) or Flash (NEO-M8N).
- Supported antennas Active and passive.
- Odometer Travelled distance.
- Data-logger For position, velocity, and time (NEO-M8N).
STM32F030F4P6 core board development board core ARM CORTEX-M0
QX 95 Quad-Copter Combo kit with Radiolink flight controller
QX95 Quad-copter Combo Kit
SIYI A2 MINI Ultra Wide Angle FPV Gimbal Single Axis Tilt with160 Degree FOV
Raspberry Pi 4 Model-B with 4 GB RAM
Assassin 5 inch 222mm Drone Racing frame Kit
Uno R3 CH340G ATmega328p Development Board with Micro-USB
APEX DC HD 5” FPV Frame Kit
Uno R3 Board without Cable compatible with Arduino
Raspberry Pi Compute Module 4 – 4GB RAM, 32GB eMMC, 2.4/5.0GHz Wi-Fi & Bluetooth 5.0 (CM4104032)
Q100 Brushed Quad-copter Frame
Waveshare Arduino Compatible Base Board For Raspberry Pi Compute Module 4, HDMI, USB, M.2 Slot
Arducam 16MP IMX519 (NOIR) Camera Module for All Raspberry Pi Models
IR Lens for OpenMV Cam 7
Robocat 270 Racing Quadcopter Frame
PDB-XT60 with BEC 5V and 12V
X2 ELF 88MM Micro brushless racing kit
Ready to Sky Q450 Quadcopter Frame – PCB Version Frame Kit with Integrated PCB
ARF Quadcopter Advanced Combo Kit
Pixhawk 2.4.7 Upgraded Flight Controller kit with GPS Module Combo Kit
Arducam 8MP IMX219 Camera for Raspberry Pi 4 Model B, Pi 3/3B+, Pi Zero 2W and More 





There are no reviews yet.