We are pleased to inform you that Hardkernel has now brought back the ODROID H-series with not just one, but two new single-board computers based on 10nm Intel Jasper Lake quad-core CPUs: the ODROID-H3 and ODROID-H3+ SBCs.
The ODROID-H3 is powered by a 2.9 GHz Intel Celeron N5105 quad-core processor with 24EU Intel UHD graphics @ up to 800 MHz while the ODROID H3+ is based on a 3.3 GHz Pentium N6005 quad-core processor with 32EU Intel UHD graphics @ 900 MHz. All other features seem to be the same for the two; they both support up to 64GB RAM, have the same M.2 PCIe Gen 3 socket, and the same 2x 2.5 GbE, 2x SATA ports, 2x USB 3.0 and 2x USB 2.0.
BOARD DETAILS:
A. CPU (Intel Pentium Silver N6005)
B. 2 x DDR4 SO-DIMM slots (Dual channel memory support)
C. 1 x M.2 PCI Express Module Socket (NGFF-2280)
D. 1 x eMMC (Embedded Multimedia-Card) Socket
E. 2 x SATA Power Connectors (2.5mm pitch, JST-XH compatible connector)
F. 2 x SATA3 6.0 Gb/s Data Connectors
G. 1 x DC Power Jack
H. 2 x USB 3.0
I. 2 x USB 2.0
J. 1 x HDMI 2.0
K. 1 x DisplayPort 1.2
L. 2 x RJ45 Ethernet Ports (10/100/1000/2500)
M. 5 x System LED Indicators
N. 1 x Peripheral Expansion Header (24-pin)
O. 1 x Power Switch
P. 1 x Reset Switch
Q. 1 x Backup Battery Connector (2-pin)
R. 1 x Active Cooling Fan Connector (4-pin)
S. 1 x Audio out, 1 x Audio in, 1 x SPDIF out
Specification:
Power
DC jack : outer (negative) diameter 5.5mm, inner(positive) diameter 2.1mm
DC 14V ~ 20V (up to 60W)
DC 15V/4A power adapter is recommended if you don’t use two 3.5“ HDDs
DC 19V/7A power adapter is recommended if you two 3.5” HDDs together
Power consumption:
IDLE: ≃1..9W
CPU Stress: ≃15W
CPU+GPU Stress: ≃18W
Power-off: ≃0.25W
Suspend: ≃0.6W
Processor
Intel Celeron N5105 Processor (10nm, Quad-Core, TDP 10W)
H3+(N6005) : up to 3.3Ghz
4MB L2 Cache
Intel UHD Graphics (24/32 EU up to 900MHz)
Memory
2 x DDR4 1.2V SO-DIMM slots
Dual Channel, up to 2933 MT/s (DDR4-PC23400)
Max memory capacity 64GB
DDR3/DDR5 is not supported
Storage
1 x eMMC connector (bootable and selectable on BIOS)
Various eMMC modules can be purchased at the Hardkernel store
2 x SATA3 6Gbps
1 x M.2 slot (PCIe 3.0 x 4, supports NGFF-2280 cards)M.2 SATA SSD is not supported
Networking
2 x GbE LAN ports (RJ45, supports 10/100/1000/2500 Mbps)
Realtek RTL8125B
Supports Wake-On-Lan
LED indicators (Green: Link, Amber: Traffic)
Audio
1 x Audio out (3.5mm jack)
1 x Audio in (3.5mm jack)
1 x SPDIF out (ALC1200, HDA codec)
* HDMI & DP have audio output too.
Video
1 x DisplayPort 1.2 (up to 4K@60Hz)
1 x HDMI 2.0 (up to 4K@60Hz)
Dual simultaneous display support
External I/O
2 x USB 3.0 Host ports
2 x USB 2.0 Host ports
1 x Peripheral Expansion Header (24-pin, 2.54mm pitch)
1 x DC 5V, 1 x DC 3.3V, 5 x GND
1 x UART (TXD/RXD/RTS/CTS)
2 x I2C (SCL/SDA)
1 x External Power Button
HDMI CEC, 5VA+
3 x USB 2.0
All 3.3V I/O signal level
Other features
Passive Heatsink
BIOS Backup Battery
Maintains system time and BIOS settings
Power Button
Reset Button
System LEDs Indicators:– Red (PWR) – Solid light when DC power is supplied– Blue (left, SLEEP) – turns off only when the system enters into suspend mode– Blue (right, PMIC) – turns on only when the major power rails are working– Amber (SATA) – Flashes when SATA data transfers– Green (NVMe) – Flashes when NVMe data transfers
Active Cooling Fan Connector (12V 4-pin, PWM input + TACHO output)
NVIDIA Boards, Single Board Computer, Single Board Computers
There are no reviews yet.