The Odroid H3+ single-board computer is based on the quad-core Intel Pentium Jasper Lake N6005 processor clocked at 2 GHz (up to 3.3 GHz in boost mode) with 1.5 MB L2 cache and 4 MB L3 cache, created in 10 nm technology. It has two slots for DDR4-PC4-23400 SO-DIMM RAM and supports a capacity of up to 64 GB.
The board also features a PCIe 3.0 x 4 slot for an M.2 NVMe drive, 2 x 2.5Gbps Ethernet ports, SEE4.2 accelerator, HDMI 2.0 port, DisplayPort, and RTC/BIOS battery slot. Odroid H3+ is also equipped with a powerful graphics chip Intel UHD Graphics 23 EUs Turbo 900 MHz.
Board Details:
A. CPU (Intel Pentium Silver N6005)
B. 2 x DDR4 SO-DIMM slots (Dual channel memory support)
C. 1 x M.2 PCI Express Module Socket (NGFF-2280)
D. 1 x eMMC (Embedded Multimedia-Card) Socket
E. 2 x SATA Power Connectors (2.5mm pitch, JST-XH compatible connector)
F. 2 x SATA3 6.0 Gb/s Data Connectors
G. 1 x DC Power Jack
H. 2 x USB 3.0
I. 2 x USB 2.0
J. 1 x HDMI 2.0
K. 1 x DisplayPort 1.2
L. 2 x RJ45 Ethernet Ports (10/100/1000/2500)
M. 5 x System LED Indicators
N. 1 x Peripheral Expansion Header (24-pin)
O. 1 x Power Switch
P. 1 x Reset Switch
Q. 1 x Backup Battery Connector (2-pin)
R. 1 x Active Cooling Fan Connector (4-pin)
S. 1 x Audio out, 1 x Audio in, 1 x SPDIF out
How to run the Odroid H3 minicomputer?
Connect the included RTC / BIOS backup battery to the 2-pin connector, which maintains the BIOS settings and performs the RTC function.
Install DDR4 RAM sticks up to 32GB per slot and up to 64GB total (not included).
Connect additional peripherals such as a monitor, keyboard, and mouse. Odroid H3 does not support devices with PS2 port. Only USB or Bluetooth devices are supported.
The display can be connected via USB or DisplayPort.
In order to communicate with the Internet, a patch cord must be connected to the Ethernet port (10 / 100 / 1000 / 2500 Mb/s)
Connect the 15V/4A power adapter to the 5.5/2.1mm DC jack port.
Seeed Studio SBC, Single Board Computer
There are no reviews yet.